60 RPM to Radians Per Second Converter
Instant conversion for 60 RPM to rad/s (6.283185 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 6.2831853
- Degrees per Second (°/s)
- 360 °/s
- Hertz (Hz)
- 1 Hz
- Revolutions per Second (RPS)
- 1 rev/s
- Revolutions per Hour (RPH)
- 3,600 rev/hr
- Revolutions per Day
- 86,400 rev/day
- Radians per Minute (rad/min)
- 376.99112 rad/min
- Milliradians per Second (mrad/s)
- 6,283.1853 mrad/s
- Period (seconds per rev)
- 1 s/rev
- Exact Formula
- 60 × π/30 = 6.2831853 rad/s
- Nearest Real-World Example
- Ceiling fan — high (200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 60 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 60 × (π / 30) = 6.283185 rad/s
Exact fraction: 60π/30 rad/s · Reciprocal: 6.283 rad/s × (30/π) = 60 RPM
Reverse Conversion: 6.283 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
60 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
60 RPM = 2π rad/s ≈ 6.283185 rad/s
Reduced fraction — keep this form through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 6.282 rad/s instead of the exact 6.2832 rad/s — an error of 0.001185 rad/s.
What this speed looks like in practice
At 60 RPM a shaft turns about 1.33× as fast as a 7-inch single (45 RPM). A ceiling fan on high turns about 3.33× faster.
Revolutions over time
That is 3,600 revolutions per hour and 86,400 per day. A quarter turn (90°) takes 250 ms, and the shaft sweeps 0.36° every millisecond.
Rim speed and centripetal load at ω = 6.2832 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.06283 m/s · 0.2262 km/h | 0.3948 m/s² · 0.04026 g |
| 5 cm | 10 cm | 0.3142 m/s · 1.131 km/h | 1.974 m/s² · 0.2013 g |
| 10 cm | 20 cm | 0.6283 m/s · 2.262 km/h | 3.948 m/s² · 0.4026 g |
| 25 cm | 50 cm | 1.571 m/s · 5.655 km/h | 9.87 m/s² · 1.006 g |
| 50 cm | 1 m | 3.142 m/s · 11.31 km/h | 19.74 m/s² · 2.013 g |
| 1 m | 2 m | 6.283 m/s · 22.62 km/h | 39.48 m/s² · 4.026 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 60 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 1 Hz | Below typical VFD range — use a gearbox |
| 4 | 2 Hz | Below typical VFD range — use a gearbox |
| 6 | 3 Hz | Below typical VFD range — use a gearbox |
| 8 | 4 Hz | Below typical VFD range — use a gearbox |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 20 RPM · 2.094 rad/s | ×3 |
| 5:1 | 12 RPM · 1.257 rad/s | ×5 |
| 10:1 | 6 RPM · 0.6283 rad/s | ×10 |
| 30:1 | 2 RPM · 0.2094 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 0.01974 J |
| 0.01 kg·m² (bench-grinder wheel) | 0.1974 J |
| 0.1 kg·m² (car flywheel) | 1.974 J |
| 1 kg·m² (industrial flywheel) | 19.74 J |
Multiples of this speed

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 60 RPM to radians per second, multiply 60 by π and divide by 30: 60 × (π / 30) = 6.283185 rad/s (approx. 6.283 rad/s).
60 RPM equals 1.0000 Hz (revolutions per second), calculated by dividing 60 by 60 seconds.
To convert 6.283 rad/s back to RPM, multiply by 30 and divide by π: 6.283 × (30 / π) ≈ 60 RPM.
At 60 RPM, one full 360° revolution takes 1 seconds (1000.00 ms).
A 4-pole induction motor has a synchronous speed of 60 RPM at 2 Hz (f = RPM × poles / 120 = 60 × 4 / 120). That is far below a drive's usable range, so in practice a standard motor runs faster and a gearbox or gearmotor brings the output down to this speed.
Tangential speed is v = ω·r = 6.283185 rad/s × 0.1 m = 0.6283 m/s (2.2619 km/h). The centripetal acceleration at the rim is ω²·r = 3.9478 m/s².