RPM to Radians Per SecondRPM to rad/s

61 RPM to Radians Per Second Converter

Instant conversion for 61 RPM to rad/s (6.387905 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.

m
Result6.387905 rad/s
Radians per Second (rad/s)
6.3879051
Degrees per Second (°/s)
366 °/s
Hertz (Hz)
1.016667 Hz
Revolutions per Second (RPS)
1.016667 rev/s
Revolutions per Hour (RPH)
3,660 rev/hr
Revolutions per Day
87,840 rev/day
Radians per Minute (rad/min)
383.2743 rad/min
Milliradians per Second (mrad/s)
6,387.9051 mrad/s
Period (seconds per rev)
0.983607 s/rev
Exact Formula
61 × π/30 = 6.3879051 rad/s
Nearest Real-World Example
Ceiling fan — high (200 RPM)
Precision Drift Meter (Exact π/30 vs. 0.10472 Rounded)Zero Drift Here

Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:

Exact Value (π/30):6.387905 rad/s
Rounded (0.10472):6.387920 rad/s
Angular Error / Hour:3.08° / hr

Worked Conversion: 61 RPM to Radians Per Second

To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.

rad/s = 61 × (π / 30) = 6.387905 rad/s

Exact fraction: 61π/30 rad/s · Reciprocal: 6.388 rad/s × (30/π) = 61 RPM

Angular Velocity
6.387905 rad/s
Frequency
1.0167 Hz
Degrees / Second
366 °/s
Period per Rev
0.9836 s
Engineering Context: Under 100 RPM you are around one revolution per second, the range of bicycle wheels at low speed, slow ceiling fans and hand-cranked machinery.

Reverse Conversion: 6.388 rad/s to RPM

Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.

Browse Reverse Conversions →

In-Depth Engineering Guides & References

5.36 Rad/s to RPM: College Physics Homework Benchmark Solution— Serway & Halliday kinematics proof and analytical derivation.
RPM to Radians Per Second Formula & Calculus Proof— Dimensional cancellation, π/30 derivation, and IEEE 754 precision.
Angular Velocity Guide & Rotational Kinematics— SI standards, tangential velocity (v = ω·r), and centripetal acceleration.
Complete Conversion Index— Browse pre-calculated conversion speeds from 1 to 20,000 RPM.

61 RPM: exact form, real-world scale & engineering tables

Exact answer in terms of π

61 RPM = 61π/30 rad/s ≈ 6.387905 rad/s

Keep π symbolic through multi-step problems and only round at the end.

Rounding check

Using the rounded factor 0.1047 gives 6.3867 rad/s instead of the exact 6.3879 rad/s — an error of 0.001205 rad/s.

What this speed looks like in practice

At 61 RPM a shaft turns about 1.36× as fast as a 7-inch single (45 RPM). A ceiling fan on high turns about 3.28× faster.

Revolutions over time

That is 3,660 revolutions per hour and 87,840 per day. A quarter turn (90°) takes 246 ms, and the shaft sweeps 0.366° every millisecond.

Rim speed and centripetal load at ω = 6.3879 rad/s

Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.

RadiusDiameterRim speedCentripetal acceleration
1 cm2 cm0.06388 m/s · 0.23 km/h0.4081 m/s² · 0.04161 g
5 cm10 cm0.3194 m/s · 1.15 km/h2.04 m/s² · 0.208 g
10 cm20 cm0.6388 m/s · 2.3 km/h4.081 m/s² · 0.4161 g
25 cm50 cm1.597 m/s · 5.749 km/h10.2 m/s² · 1.04 g
50 cm1 m3.194 m/s · 11.5 km/h20.4 m/s² · 2.08 g
1 m2 m6.388 m/s · 23 km/h40.81 m/s² · 4.161 g

Driving this speed with an AC motor

Supply frequency an induction motor would need for a synchronous speed of 61 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.

PolesSupply frequencyPractical note
21.017 HzBelow typical VFD range — use a gearbox
42.033 HzBelow typical VFD range — use a gearbox
63.05 HzBelow typical VFD range — use a gearbox
84.067 HzBelow typical VFD range — use a gearbox

Through a reduction gearbox

Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.

RatioOutput speedTorque ×
3:120.33 RPM · 2.129 rad/s×3
5:112.2 RPM · 1.278 rad/s×5
10:16.1 RPM · 0.6388 rad/s×10
30:12.033 RPM · 0.2129 rad/s×30

Stored rotational energy

Kinetic energy E = ½·I·ω² for a range of moments of inertia.

Moment of inertiaEnergy
0.001 kg·m² (small fan impeller)0.0204 J
0.01 kg·m² (bench-grinder wheel)0.204 J
0.1 kg·m² (car flywheel)2.04 J
1 kg·m² (industrial flywheel)20.4 J

Multiples of this speed

  • 0.5× = 30.5 RPM3.194 rad/s
  • 2× = 122 RPM12.7758 rad/s
  • 5× = 305 RPM31.9395 rad/s
  • 10× = 610 RPM63.8791 rad/s
Rizwan Malik headshot

Rizwan Malik

Founder & Editor

  • Formulas checked against the BIPM SI Brochure
  • Unit definitions per NIST SP 811

Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.

Frequently asked questions