62 RPM to Radians Per Second Converter
Instant conversion for 62 RPM to rad/s (6.492625 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 6.4926248
- Degrees per Second (°/s)
- 372 °/s
- Hertz (Hz)
- 1.033333 Hz
- Revolutions per Second (RPS)
- 1.033333 rev/s
- Revolutions per Hour (RPH)
- 3,720 rev/hr
- Revolutions per Day
- 89,280 rev/day
- Radians per Minute (rad/min)
- 389.55749 rad/min
- Milliradians per Second (mrad/s)
- 6,492.6248 mrad/s
- Period (seconds per rev)
- 0.967742 s/rev
- Exact Formula
- 62 × π/30 = 6.4926248 rad/s
- Nearest Real-World Example
- Ceiling fan — high (200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 62 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 62 × (π / 30) = 6.492625 rad/s
Exact fraction: 62π/30 rad/s · Reciprocal: 6.493 rad/s × (30/π) = 62 RPM
Reverse Conversion: 6.493 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
62 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
62 RPM = 31π/15 rad/s ≈ 6.492625 rad/s
Reduced fraction — keep this form through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 6.4914 rad/s instead of the exact 6.4926 rad/s — an error of 0.001225 rad/s.
What this speed looks like in practice
At 62 RPM a shaft turns about 1.38× as fast as a 7-inch single (45 RPM). A ceiling fan on high turns about 3.23× faster.
Revolutions over time
That is 3,720 revolutions per hour and 89,280 per day. A quarter turn (90°) takes 242 ms, and the shaft sweeps 0.372° every millisecond.
Rim speed and centripetal load at ω = 6.4926 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.06493 m/s · 0.2337 km/h | 0.4215 m/s² · 0.04299 g |
| 5 cm | 10 cm | 0.3246 m/s · 1.169 km/h | 2.108 m/s² · 0.2149 g |
| 10 cm | 20 cm | 0.6493 m/s · 2.337 km/h | 4.215 m/s² · 0.4299 g |
| 25 cm | 50 cm | 1.623 m/s · 5.843 km/h | 10.54 m/s² · 1.075 g |
| 50 cm | 1 m | 3.246 m/s · 11.69 km/h | 21.08 m/s² · 2.149 g |
| 1 m | 2 m | 6.493 m/s · 23.37 km/h | 42.15 m/s² · 4.299 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 62 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 1.033 Hz | Below typical VFD range — use a gearbox |
| 4 | 2.067 Hz | Below typical VFD range — use a gearbox |
| 6 | 3.1 Hz | Below typical VFD range — use a gearbox |
| 8 | 4.133 Hz | Below typical VFD range — use a gearbox |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 20.67 RPM · 2.164 rad/s | ×3 |
| 5:1 | 12.4 RPM · 1.299 rad/s | ×5 |
| 10:1 | 6.2 RPM · 0.6493 rad/s | ×10 |
| 30:1 | 2.067 RPM · 0.2164 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 0.02108 J |
| 0.01 kg·m² (bench-grinder wheel) | 0.2108 J |
| 0.1 kg·m² (car flywheel) | 2.108 J |
| 1 kg·m² (industrial flywheel) | 21.08 J |
Multiples of this speed
- 0.5× = 31 RPM3.2463 rad/s
- 2× = 124 RPM12.9852 rad/s
- 5× = 310 RPM32.4631 rad/s
- 10× = 620 RPM64.9262 rad/s

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 62 RPM to radians per second, multiply 62 by π and divide by 30: 62 × (π / 30) = 6.492625 rad/s (approx. 6.493 rad/s).
62 RPM equals 1.0333 Hz (revolutions per second), calculated by dividing 62 by 60 seconds.
To convert 6.493 rad/s back to RPM, multiply by 30 and divide by π: 6.493 × (30 / π) ≈ 62 RPM.
At 62 RPM, one full 360° revolution takes 0.9677 seconds (967.74 ms).
A 4-pole induction motor has a synchronous speed of 62 RPM at 2.0667 Hz (f = RPM × poles / 120 = 62 × 4 / 120). That is far below a drive's usable range, so in practice a standard motor runs faster and a gearbox or gearmotor brings the output down to this speed.
Tangential speed is v = ω·r = 6.492625 rad/s × 0.1 m = 0.6493 m/s (2.3373 km/h). The centripetal acceleration at the rim is ω²·r = 4.2154 m/s².