RPM to Radians Per SecondRPM to rad/s

300 RPM to Radians Per Second Converter

Instant conversion for 300 RPM to rad/s (31.415927 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.

m
Result31.415927 rad/s
Radians per Second (rad/s)
31.415927
Degrees per Second (°/s)
1,800 °/s
Hertz (Hz)
5 Hz
Revolutions per Second (RPS)
5 rev/s
Revolutions per Hour (RPH)
18,000 rev/hr
Revolutions per Day
432,000 rev/day
Radians per Minute (rad/min)
1,884.9556 rad/min
Milliradians per Second (mrad/s)
31,415.927 mrad/s
Period (seconds per rev)
0.2 s/rev
Exact Formula
300 × π/30 = 31.415927 rad/s
Nearest Real-World Example
Ceiling fan — high (200 RPM)
Precision Drift Meter (Exact π/30 vs. 0.10472 Rounded)Zero Drift Here

Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:

Exact Value (π/30):31.415927 rad/s
Rounded (0.10472):31.416000 rad/s
Angular Error / Hour:15.15° / hr

Worked Conversion: 300 RPM to Radians Per Second

To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.

rad/s = 300 × (π / 30) = 31.415927 rad/s

Exact fraction: 300π/30 rad/s · Reciprocal: 31.416 rad/s × (30/π) = 300 RPM

Angular Velocity
31.415927 rad/s
Frequency
5 Hz
Degrees / Second
1,800 °/s
Period per Rev
0.2 s
Engineering Context: A few hundred RPM covers ceiling fans, washing-machine wash cycles and geared conveyor drives — fast enough to feel, slow enough to watch.

Reverse Conversion: 31.416 rad/s to RPM

Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.

Browse Reverse Conversions →

In-Depth Engineering Guides & References

5.36 Rad/s to RPM: College Physics Homework Benchmark Solution— Serway & Halliday kinematics proof and analytical derivation.
RPM to Radians Per Second Formula & Calculus Proof— Dimensional cancellation, π/30 derivation, and IEEE 754 precision.
Angular Velocity Guide & Rotational Kinematics— SI standards, tangential velocity (v = ω·r), and centripetal acceleration.
Complete Conversion Index— Browse pre-calculated conversion speeds from 1 to 20,000 RPM.

300 RPM: exact form, real-world scale & engineering tables

Exact answer in terms of π

300 RPM = 10π rad/s ≈ 31.415927 rad/s

Reduced fraction — keep this form through multi-step problems and only round at the end.

Rounding check

Using the rounded factor 0.1047 gives 31.41 rad/s instead of the exact 31.4159 rad/s — an error of 0.005927 rad/s.

What this speed looks like in practice

At 300 RPM a shaft turns about 1.5× as fast as a ceiling fan on high. A car engine at idle turns about 2.5× faster.

Revolutions over time

That is 18,000 revolutions per hour and 432,000 per day. A quarter turn (90°) takes 50 ms, and the shaft sweeps 1.8° every millisecond.

Rim speed and centripetal load at ω = 31.4159 rad/s

Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.

RadiusDiameterRim speedCentripetal acceleration
1 cm2 cm0.3142 m/s · 1.131 km/h9.87 m/s² · 1.006 g
5 cm10 cm1.571 m/s · 5.655 km/h49.35 m/s² · 5.032 g
10 cm20 cm3.142 m/s · 11.31 km/h98.7 m/s² · 10.06 g
25 cm50 cm7.854 m/s · 28.27 km/h246.7 m/s² · 25.16 g
50 cm1 m15.71 m/s · 56.55 km/h493.5 m/s² · 50.32 g
1 m2 m31.42 m/s · 113.1 km/h987 m/s² · 100.6 g

Driving this speed with an AC motor

Supply frequency an induction motor would need for a synchronous speed of 300 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.

PolesSupply frequencyPractical note
25 HzReachable with a VFD
410 HzReachable with a VFD
615 HzReachable with a VFD
820 HzReachable with a VFD

Through a reduction gearbox

Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.

RatioOutput speedTorque ×
3:1100 RPM · 10.47 rad/s×3
5:160 RPM · 6.283 rad/s×5
10:130 RPM · 3.142 rad/s×10
30:110 RPM · 1.047 rad/s×30

Stored rotational energy

Kinetic energy E = ½·I·ω² for a range of moments of inertia.

Moment of inertiaEnergy
0.001 kg·m² (small fan impeller)0.4935 J
0.01 kg·m² (bench-grinder wheel)4.935 J
0.1 kg·m² (car flywheel)49.35 J
1 kg·m² (industrial flywheel)493.5 J

Multiples of this speed

Rizwan Malik headshot

Rizwan Malik

Founder & Editor

  • Formulas checked against the BIPM SI Brochure
  • Unit definitions per NIST SP 811

Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.

Frequently asked questions