RPM to Radians Per SecondRPM to rad/s

59 RPM to Radians Per Second Converter

Instant conversion for 59 RPM to rad/s (6.178466 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.

m
Result6.178466 rad/s
Radians per Second (rad/s)
6.1784656
Degrees per Second (°/s)
354 °/s
Hertz (Hz)
0.983333 Hz
Revolutions per Second (RPS)
0.983333 rev/s
Revolutions per Hour (RPH)
3,540 rev/hr
Revolutions per Day
84,960 rev/day
Radians per Minute (rad/min)
370.70793 rad/min
Milliradians per Second (mrad/s)
6,178.4656 mrad/s
Period (seconds per rev)
1.016949 s/rev
Exact Formula
59 × π/30 = 6.1784656 rad/s
Nearest Real-World Example
Ceiling fan — high (200 RPM)
Precision Drift Meter (Exact π/30 vs. 0.10472 Rounded)Zero Drift Here

Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:

Exact Value (π/30):6.178466 rad/s
Rounded (0.10472):6.178480 rad/s
Angular Error / Hour:2.98° / hr

Worked Conversion: 59 RPM to Radians Per Second

To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.

rad/s = 59 × (π / 30) = 6.178466 rad/s

Exact fraction: 59π/30 rad/s · Reciprocal: 6.178 rad/s × (30/π) = 59 RPM

Angular Velocity
6.178466 rad/s
Frequency
0.9833 Hz
Degrees / Second
354 °/s
Period per Rev
1.0169 s
Engineering Context: Under 100 RPM you are around one revolution per second, the range of bicycle wheels at low speed, slow ceiling fans and hand-cranked machinery.

Reverse Conversion: 6.178 rad/s to RPM

Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.

Browse Reverse Conversions →

In-Depth Engineering Guides & References

5.36 Rad/s to RPM: College Physics Homework Benchmark Solution— Serway & Halliday kinematics proof and analytical derivation.
RPM to Radians Per Second Formula & Calculus Proof— Dimensional cancellation, π/30 derivation, and IEEE 754 precision.
Angular Velocity Guide & Rotational Kinematics— SI standards, tangential velocity (v = ω·r), and centripetal acceleration.
Complete Conversion Index— Browse pre-calculated conversion speeds from 1 to 20,000 RPM.

59 RPM: exact form, real-world scale & engineering tables

Exact answer in terms of π

59 RPM = 59π/30 rad/s ≈ 6.178466 rad/s

Keep π symbolic through multi-step problems and only round at the end.

Rounding check

Using the rounded factor 0.1047 gives 6.1773 rad/s instead of the exact 6.1785 rad/s — an error of 0.001166 rad/s.

What this speed looks like in practice

At 59 RPM a shaft turns about 1.31× as fast as a 7-inch single (45 RPM). A ceiling fan on high turns about 3.39× faster.

Revolutions over time

That is 3,540 revolutions per hour and 84,960 per day. A quarter turn (90°) takes 254 ms, and the shaft sweeps 0.354° every millisecond.

Rim speed and centripetal load at ω = 6.1785 rad/s

Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.

RadiusDiameterRim speedCentripetal acceleration
1 cm2 cm0.06178 m/s · 0.2224 km/h0.3817 m/s² · 0.03893 g
5 cm10 cm0.3089 m/s · 1.112 km/h1.909 m/s² · 0.1946 g
10 cm20 cm0.6178 m/s · 2.224 km/h3.817 m/s² · 0.3893 g
25 cm50 cm1.545 m/s · 5.561 km/h9.543 m/s² · 0.9732 g
50 cm1 m3.089 m/s · 11.12 km/h19.09 m/s² · 1.946 g
1 m2 m6.178 m/s · 22.24 km/h38.17 m/s² · 3.893 g

Driving this speed with an AC motor

Supply frequency an induction motor would need for a synchronous speed of 59 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.

PolesSupply frequencyPractical note
20.9833 HzBelow typical VFD range — use a gearbox
41.967 HzBelow typical VFD range — use a gearbox
62.95 HzBelow typical VFD range — use a gearbox
83.933 HzBelow typical VFD range — use a gearbox

Through a reduction gearbox

Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.

RatioOutput speedTorque ×
3:119.67 RPM · 2.059 rad/s×3
5:111.8 RPM · 1.236 rad/s×5
10:15.9 RPM · 0.6178 rad/s×10
30:11.967 RPM · 0.2059 rad/s×30

Stored rotational energy

Kinetic energy E = ½·I·ω² for a range of moments of inertia.

Moment of inertiaEnergy
0.001 kg·m² (small fan impeller)0.01909 J
0.01 kg·m² (bench-grinder wheel)0.1909 J
0.1 kg·m² (car flywheel)1.909 J
1 kg·m² (industrial flywheel)19.09 J

Multiples of this speed

  • 0.5× = 29.5 RPM3.0892 rad/s
  • 2× = 118 RPM12.3569 rad/s
  • 5× = 295 RPM30.8923 rad/s
  • 10× = 590 RPM61.7847 rad/s
Rizwan Malik headshot

Rizwan Malik

Founder & Editor

  • Formulas checked against the BIPM SI Brochure
  • Unit definitions per NIST SP 811

Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.

Frequently asked questions