Motor Slip Calculator
Work out how far an AC induction motor runs below its synchronous speed, and convert both speeds to rad/s. For standard speeds by pole count, see the motor speed reference chart.
Motor Slip Calculator
Enter the supply frequency, pole count and the nameplate (full-load) speed. You get synchronous speed, slip, rotor frequency and the shaft speed in rad/s.
Worked example
A 4-pole motor on a 60 Hz supply has a nameplate speed of 1,750 RPM. Its synchronous speed is 120 × 60 / 4 = 1,800 RPM. Slip is (1,800 − 1,750) / 1,800 = 2.78%, and the rotor current alternates at 0.0278 × 60 = 1.67 Hz. The shaft turns at 1,750 × π/30 ≈ 183.26 rad/s. More on these speeds in 1800 RPM to rad/s and standard motor RPMs.
Next steps: get the shaft torque from the nameplate kW with the torque, power and RPM calculator, size a reducer with the gear ratio calculator, or convert speed to electrical frequency with the RPM to Hz calculator.
Frequently Asked Questions
What is motor slip?
Slip is how far an induction motor's shaft lags behind the rotating magnetic field, as a fraction of synchronous speed: s = (ns − n) / ns. The rotor needs that lag to induce current and produce torque.
How do you calculate synchronous speed?
Synchronous speed ns = 120 × f / P, where f is the supply frequency in Hz and P is the number of poles. A 4-pole motor on 60 Hz has ns = 1800 RPM; on 50 Hz it has 1500 RPM.
What is a normal slip percentage?
Standard induction motors run at about 1–5% slip at full load. Large, high-efficiency motors sit near 1%; small motors and high-slip NEMA design D motors can reach 5–13%.
Why is my slip negative?
Negative slip means the shaft turns faster than the magnetic field, so the machine is being driven and works as a generator. If that isn't expected, the pole count is probably wrong for the speed you entered.