1,800 RPM to Radians Per Second Converter
Instant conversion for 1,800 RPM to rad/s (188.495559 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 188.49556
- Degrees per Second (°/s)
- 10,800 °/s
- Hertz (Hz)
- 30 Hz
- Revolutions per Second (RPS)
- 30 rev/s
- Revolutions per Hour (RPH)
- 108,000 rev/hr
- Revolutions per Day
- 2,592,000 rev/day
- Radians per Minute (rad/min)
- 11,309.734 rad/min
- Milliradians per Second (mrad/s)
- 188,495.56 mrad/s
- Period (seconds per rev)
- 0.033333 s/rev
- Exact Formula
- 1800 × π/30 = 188.49556 rad/s
- Nearest Real-World Example
- Power drill (2,000 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 1,800 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 1800 × (π / 30) = 188.495559 rad/s
Exact fraction: 1800π/30 rad/s · Reciprocal: 188.5 rad/s × (30/π) = 1,800 RPM
Reverse Conversion: 188.5 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
1,800 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
1,800 RPM = 60π rad/s ≈ 188.495559 rad/s
Reduced fraction — keep this form through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 188.46 rad/s instead of the exact 188.4956 rad/s — an error of 0.03556 rad/s.
What this speed looks like in practice
That is the typical speed of a 4-pole motor on a 60 Hz grid. At 1,800 RPM a shaft turns about 1.5× as fast as a washing machine spin cycle. A laptop hard drive (5,400 RPM) turns about 3× faster.
Revolutions over time
That is 108,000 revolutions per hour and 2,592,000 per day. A quarter turn (90°) takes 8.33 ms, and the shaft sweeps 10.8° every millisecond.
Rim speed and centripetal load at ω = 188.4956 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 1.885 m/s · 6.786 km/h | 355.3 m/s² · 36.23 g |
| 5 cm | 10 cm | 9.425 m/s · 33.93 km/h | 1,777 m/s² · 181.2 g |
| 10 cm | 20 cm | 18.85 m/s · 67.86 km/h | 3,553 m/s² · 362.3 g |
| 25 cm | 50 cm | 47.12 m/s · 169.6 km/h | 8,883 m/s² · 905.8 g |
| 50 cm | 1 m | 94.25 m/s · 339.3 km/h | 17,770 m/s² · 1,812 g |
| 1 m | 2 m | 188.5 m/s · 678.6 km/h | 35,530 m/s² · 3,623 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 1,800 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 30 Hz | Reachable with a VFD |
| 4 | 60 Hz | Standard speed on a 60 Hz grid |
| 6 | 90 Hz | Reachable with a VFD |
| 8 | 120 Hz | Reachable with a VFD |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 600 RPM · 62.83 rad/s | ×3 |
| 5:1 | 360 RPM · 37.7 rad/s | ×5 |
| 10:1 | 180 RPM · 18.85 rad/s | ×10 |
| 30:1 | 60 RPM · 6.283 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 17.77 J |
| 0.01 kg·m² (bench-grinder wheel) | 177.7 J |
| 0.1 kg·m² (car flywheel) | 1.777 kJ |
| 1 kg·m² (industrial flywheel) | 17.77 kJ |
Multiples of this speed

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 1,800 RPM to radians per second, multiply 1800 by π and divide by 30: 1800 × (π / 30) = 188.495559 rad/s (approx. 188.5 rad/s).
1,800 RPM equals 30.0000 Hz (revolutions per second), calculated by dividing 1800 by 60 seconds.
To convert 188.5 rad/s back to RPM, multiply by 30 and divide by π: 188.5 × (30 / π) ≈ 1,800 RPM.
At 1,800 RPM, one full 360° revolution takes 0.0333 seconds (33.33 ms).
A 4-pole induction motor has a synchronous speed of 1,800 RPM at 60 Hz (f = RPM × poles / 120 = 1800 × 4 / 120). Under load it runs roughly 2–4% below synchronous speed, so a VFD is normally set slightly higher.
Tangential speed is v = ω·r = 188.495559 rad/s × 0.1 m = 18.8496 m/s (67.8584 km/h). The centripetal acceleration at the rim is ω²·r = 3553.0576 m/s².