RPM to Radians Per SecondRPM to rad/s

3,600 RPM to Radians Per Second Converter

Instant conversion for 3,600 RPM to rad/s (376.991118 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.

m
Result376.991118 rad/s
Radians per Second (rad/s)
376.99112
Degrees per Second (°/s)
21,600 °/s
Hertz (Hz)
60 Hz
Revolutions per Second (RPS)
60 rev/s
Revolutions per Hour (RPH)
216,000 rev/hr
Revolutions per Day
5,184,000 rev/day
Radians per Minute (rad/min)
22,619.467 rad/min
Milliradians per Second (mrad/s)
376,991.12 mrad/s
Period (seconds per rev)
0.016667 s/rev
Exact Formula
3600 × π/30 = 376.99112 rad/s
Nearest Real-World Example
Car engine — highway (2,500 RPM)
Precision Drift Meter (Exact π/30 vs. 0.10472 Rounded)Zero Drift Here

Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:

Exact Value (π/30):376.991118 rad/s
Rounded (0.10472):376.992000 rad/s
Angular Error / Hour:181.84° / hr

Worked Conversion: 3,600 RPM to Radians Per Second

To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.

rad/s = 3600 × (π / 30) = 376.991118 rad/s

Exact fraction: 3600π/30 rad/s · Reciprocal: 376.99 rad/s × (30/π) = 3,600 RPM

Angular Velocity
376.991118 rad/s
Frequency
60 Hz
Degrees / Second
21,600 °/s
Period per Rev
0.0167 s
Engineering Context: 3,600 RPM is the 2-pole synchronous speed on a 60 Hz supply — the rating point for a huge share of North American generators and high-speed pumps.

Reverse Conversion: 376.99 rad/s to RPM

Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.

Browse Reverse Conversions →

In-Depth Engineering Guides & References

★ 3600 RPM in rad/s = 120π (376.99): 2-Pole 60 Hz Motors — 2-pole high-speed motor kinematics, shaft critical whirling speeds, and bearing speed limits.
5.36 Rad/s to RPM: College Physics Homework Benchmark Solution— Serway & Halliday kinematics proof and analytical derivation.
RPM to Radians Per Second Formula & Calculus Proof— Dimensional cancellation, π/30 derivation, and IEEE 754 precision.
Standard Motor RPMs: Synchronous Speeds & Slip— 50 Hz vs 60 Hz grids, pole counts, and synchronous motor speeds.
Angular Velocity Guide & Rotational Kinematics— SI standards, tangential velocity (v = ω·r), and centripetal acceleration.
Complete Conversion Index— Browse pre-calculated conversion speeds from 1 to 20,000 RPM.

3,600 RPM: exact form, real-world scale & engineering tables

Exact answer in terms of π

3,600 RPM = 120π rad/s ≈ 376.991118 rad/s

Reduced fraction — keep this form through multi-step problems and only round at the end.

Rounding check

Using the rounded factor 0.1047 gives 376.92 rad/s instead of the exact 376.9911 rad/s — an error of 0.07112 rad/s.

What this speed looks like in practice

At 3,600 RPM a shaft turns about 2× as fast as a 4-pole motor on a 60 Hz grid. A laptop hard drive (5,400 RPM) turns about 1.5× faster.

Revolutions over time

That is 216,000 revolutions per hour and 5,184,000 per day. A quarter turn (90°) takes 4.17 ms, and the shaft sweeps 21.6° every millisecond.

Rim speed and centripetal load at ω = 376.9911 rad/s

Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.

RadiusDiameterRim speedCentripetal acceleration
1 cm2 cm3.77 m/s · 13.57 km/h1,421 m/s² · 144.9 g
5 cm10 cm18.85 m/s · 67.86 km/h7,106 m/s² · 724.6 g
10 cm20 cm37.7 m/s · 135.7 km/h14,210 m/s² · 1,449 g
25 cm50 cm94.25 m/s · 339.3 km/h35,530 m/s² · 3,623 g
50 cm1 m188.5 m/s · 678.6 km/h71,060 m/s² · 7,246 g
1 m2 m377 m/s · 1,357 km/h142,100 m/s² · 14,490 g

Driving this speed with an AC motor

Supply frequency an induction motor would need for a synchronous speed of 3,600 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.

PolesSupply frequencyPractical note
260 HzStandard speed on a 60 Hz grid
4120 HzReachable with a VFD
6180 HzAbove typical VFD range
8240 HzAbove typical VFD range

Through a reduction gearbox

Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.

RatioOutput speedTorque ×
3:11,200 RPM · 125.7 rad/s×3
5:1720 RPM · 75.4 rad/s×5
10:1360 RPM · 37.7 rad/s×10
30:1120 RPM · 12.57 rad/s×30

Stored rotational energy

Kinetic energy E = ½·I·ω² for a range of moments of inertia.

Moment of inertiaEnergy
0.001 kg·m² (small fan impeller)71.06 J
0.01 kg·m² (bench-grinder wheel)710.6 J
0.1 kg·m² (car flywheel)7.106 kJ
1 kg·m² (industrial flywheel)71.06 kJ

Multiples of this speed

Rizwan Malik headshot

Rizwan Malik

Founder & Editor

  • Formulas checked against the BIPM SI Brochure
  • Unit definitions per NIST SP 811

Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.

Frequently asked questions