58 RPM to Radians Per Second Converter
Instant conversion for 58 RPM to rad/s (6.073746 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 6.0737458
- Degrees per Second (°/s)
- 348 °/s
- Hertz (Hz)
- 0.966667 Hz
- Revolutions per Second (RPS)
- 0.966667 rev/s
- Revolutions per Hour (RPH)
- 3,480 rev/hr
- Revolutions per Day
- 83,520 rev/day
- Radians per Minute (rad/min)
- 364.42475 rad/min
- Milliradians per Second (mrad/s)
- 6,073.7458 mrad/s
- Period (seconds per rev)
- 1.034483 s/rev
- Exact Formula
- 58 × π/30 = 6.0737458 rad/s
- Nearest Real-World Example
- Ceiling fan — high (200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 58 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 58 × (π / 30) = 6.073746 rad/s
Exact fraction: 58π/30 rad/s · Reciprocal: 6.074 rad/s × (30/π) = 58 RPM
Reverse Conversion: 6.074 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
58 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
58 RPM = 29π/15 rad/s ≈ 6.073746 rad/s
Reduced fraction — keep this form through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 6.0726 rad/s instead of the exact 6.0737 rad/s — an error of 0.001146 rad/s.
What this speed looks like in practice
At 58 RPM a shaft turns about 1.29× as fast as a 7-inch single (45 RPM). A ceiling fan on high turns about 3.45× faster.
Revolutions over time
That is 3,480 revolutions per hour and 83,520 per day. A quarter turn (90°) takes 259 ms, and the shaft sweeps 0.348° every millisecond.
Rim speed and centripetal load at ω = 6.0737 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.06074 m/s · 0.2187 km/h | 0.3689 m/s² · 0.03762 g |
| 5 cm | 10 cm | 0.3037 m/s · 1.093 km/h | 1.845 m/s² · 0.1881 g |
| 10 cm | 20 cm | 0.6074 m/s · 2.187 km/h | 3.689 m/s² · 0.3762 g |
| 25 cm | 50 cm | 1.518 m/s · 5.466 km/h | 9.223 m/s² · 0.9404 g |
| 50 cm | 1 m | 3.037 m/s · 10.93 km/h | 18.45 m/s² · 1.881 g |
| 1 m | 2 m | 6.074 m/s · 21.87 km/h | 36.89 m/s² · 3.762 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 58 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 0.9667 Hz | Below typical VFD range — use a gearbox |
| 4 | 1.933 Hz | Below typical VFD range — use a gearbox |
| 6 | 2.9 Hz | Below typical VFD range — use a gearbox |
| 8 | 3.867 Hz | Below typical VFD range — use a gearbox |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 19.33 RPM · 2.025 rad/s | ×3 |
| 5:1 | 11.6 RPM · 1.215 rad/s | ×5 |
| 10:1 | 5.8 RPM · 0.6074 rad/s | ×10 |
| 30:1 | 1.933 RPM · 0.2025 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 0.01845 J |
| 0.01 kg·m² (bench-grinder wheel) | 0.1845 J |
| 0.1 kg·m² (car flywheel) | 1.845 J |
| 1 kg·m² (industrial flywheel) | 18.45 J |
Multiples of this speed
- 0.5× = 29 RPM3.0369 rad/s
- 2× = 116 RPM12.1475 rad/s
- 5× = 290 RPM30.3687 rad/s
- 10× = 580 RPM60.7375 rad/s

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 58 RPM to radians per second, multiply 58 by π and divide by 30: 58 × (π / 30) = 6.073746 rad/s (approx. 6.074 rad/s).
58 RPM equals 0.9667 Hz (revolutions per second), calculated by dividing 58 by 60 seconds.
To convert 6.074 rad/s back to RPM, multiply by 30 and divide by π: 6.074 × (30 / π) ≈ 58 RPM.
At 58 RPM, one full 360° revolution takes 1.0345 seconds (1034.48 ms).
A 4-pole induction motor has a synchronous speed of 58 RPM at 1.9333 Hz (f = RPM × poles / 120 = 58 × 4 / 120). That is far below a drive's usable range, so in practice a standard motor runs faster and a gearbox or gearmotor brings the output down to this speed.
Tangential speed is v = ω·r = 6.073746 rad/s × 0.1 m = 0.6074 m/s (2.1865 km/h). The centripetal acceleration at the rim is ω²·r = 3.689 m/s².