8 Rad/s to RPM Converter
Instant conversion for 8 rad/s to RPM (76.3944 RPM). Analytical 30/π formula, rotational frequency in Hz, and full kinematics.
- RPM
- 76.394373
- Degrees per Second (°/s)
- 458.36624 °/s
- Hertz (Hz)
- 1.27324 Hz
- Revolutions per Second (RPS)
- 1.27324 rev/s
- Revolutions per Hour (RPH)
- 4,583.6624 rev/hr
- Revolutions per Day
- 110,007.9 rev/day
- Radians per Minute (rad/min)
- 480 rad/min
- Milliradians per Second (mrad/s)
- 8,000 mrad/s
- Period (seconds per rev)
- 0.785398 s/rev
- Exact Formula
- 8 × 30/π = 76.394373 RPM
- Nearest Real-World Example
- Ceiling fan — high (200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 8 Rad/s to RPM
To convert radians per second (rad/s) to revolutions per minute (RPM), multiply by 60 seconds per minute and divide by 2π radians per revolution. The analytical reciprocal simplifies to 30/π (≈ 9.549297).
RPM = 8 × (30 / π) = 76.3944 RPM
Exact fraction: (8 × 30)/π RPM · Reciprocal: 76.394 RPM × (π/30) = 8 rad/s
Forward Conversion: 76 RPM to Rad/s
Need to convert from revolutions per minute back to radians per second? Explore the standard forward converter with exact π/30 precision.
In-Depth Engineering Guides & References
8 rad/s: exact form, real-world scale & engineering tables
Exact answer in terms of π
8 rad/s = 240/π RPM ≈ 76.394373 RPM
Keep π symbolic through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 9.55 gives 76.4 RPM instead of the exact 76.3944 RPM — an error of 0.005627 RPM.
What this speed looks like in practice
At 76.3944 RPM a shaft turns about 1.7× as fast as a 7-inch single (45 RPM). A ceiling fan on high turns about 2.62× faster.
Revolutions over time
That is 4,583.7 revolutions per hour and 110,010 per day. A quarter turn (90°) takes 196 ms, and the shaft sweeps 0.4584° every millisecond.
Rim speed and centripetal load at ω = 8 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.08 m/s · 0.288 km/h | 0.64 m/s² · 0.06526 g |
| 5 cm | 10 cm | 0.4 m/s · 1.44 km/h | 3.2 m/s² · 0.3263 g |
| 10 cm | 20 cm | 0.8 m/s · 2.88 km/h | 6.4 m/s² · 0.6526 g |
| 25 cm | 50 cm | 2 m/s · 7.2 km/h | 16 m/s² · 1.632 g |
| 50 cm | 1 m | 4 m/s · 14.4 km/h | 32 m/s² · 3.263 g |
| 1 m | 2 m | 8 m/s · 28.8 km/h | 64 m/s² · 6.526 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 76.39 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 1.273 Hz | Below typical VFD range — use a gearbox |
| 4 | 2.546 Hz | Below typical VFD range — use a gearbox |
| 6 | 3.82 Hz | Below typical VFD range — use a gearbox |
| 8 | 5.093 Hz | Reachable with a VFD |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 25.46 RPM · 2.667 rad/s | ×3 |
| 5:1 | 15.28 RPM · 1.6 rad/s | ×5 |
| 10:1 | 7.639 RPM · 0.8 rad/s | ×10 |
| 30:1 | 2.546 RPM · 0.2667 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 0.032 J |
| 0.01 kg·m² (bench-grinder wheel) | 0.32 J |
| 0.1 kg·m² (car flywheel) | 3.2 J |
| 1 kg·m² (industrial flywheel) | 32 J |
Multiples of this speed

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 8 radians per second to RPM, multiply 8 by 30 and divide by π: 8 × (30 / π) = 76.3944 RPM (approx. 76.394 RPM).
8 rad/s equals 1.2732 Hz (revolutions per second), calculated by dividing 8 by 2π (approx. 6.283185).
To convert 76.394 RPM back to radians per second, multiply by π and divide by 30: 76.394 × (π / 30) ≈ 8 rad/s.
At 8 rad/s, one full 360° revolution takes 0.7854 seconds (785.40 ms).
8 rad/s is 76.3944 RPM, which a 4-pole induction motor reaches synchronously at 2.5465 Hz (f = RPM × poles / 120). Under load it runs roughly 2–4% slower.
Tangential speed is v = ω·r = 8 rad/s × 0.1 m = 0.8 m/s (2.88 km/h), with a centripetal acceleration of ω²·r = 6.4 m/s².