16 Rad/s to RPM Converter
Instant conversion for 16 rad/s to RPM (152.7887 RPM). Analytical 30/π formula, rotational frequency in Hz, and full kinematics.
- RPM
- 152.78875
- Degrees per Second (°/s)
- 916.73247 °/s
- Hertz (Hz)
- 2.546479 Hz
- Revolutions per Second (RPS)
- 2.546479 rev/s
- Revolutions per Hour (RPH)
- 9,167.3247 rev/hr
- Revolutions per Day
- 220,015.79 rev/day
- Radians per Minute (rad/min)
- 960 rad/min
- Milliradians per Second (mrad/s)
- 16,000 mrad/s
- Period (seconds per rev)
- 0.392699 s/rev
- Exact Formula
- 16 × 30/π = 152.78875 RPM
- Nearest Real-World Example
- Ceiling fan — high (200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 16 Rad/s to RPM
To convert radians per second (rad/s) to revolutions per minute (RPM), multiply by 60 seconds per minute and divide by 2π radians per revolution. The analytical reciprocal simplifies to 30/π (≈ 9.549297).
RPM = 16 × (30 / π) = 152.7887 RPM
Exact fraction: (16 × 30)/π RPM · Reciprocal: 152.79 RPM × (π/30) = 16 rad/s
Forward Conversion: 150 RPM to Rad/s
Need to convert from revolutions per minute back to radians per second? Explore the standard forward converter with exact π/30 precision.
In-Depth Engineering Guides & References
16 rad/s: exact form, real-world scale & engineering tables
Exact answer in terms of π
16 rad/s = 480/π RPM ≈ 152.788745 RPM
Keep π symbolic through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 9.55 gives 152.8 RPM instead of the exact 152.7887 RPM — an error of 0.01125 RPM.
What this speed looks like in practice
At 152.7887 RPM a shaft turns about 3.4× as fast as a 7-inch single (45 RPM). A ceiling fan on high turns about 1.31× faster.
Revolutions over time
That is 9,167.3 revolutions per hour and 220,020 per day. A quarter turn (90°) takes 98.2 ms, and the shaft sweeps 0.9167° every millisecond.
Rim speed and centripetal load at ω = 16 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.16 m/s · 0.576 km/h | 2.56 m/s² · 0.261 g |
| 5 cm | 10 cm | 0.8 m/s · 2.88 km/h | 12.8 m/s² · 1.305 g |
| 10 cm | 20 cm | 1.6 m/s · 5.76 km/h | 25.6 m/s² · 2.61 g |
| 25 cm | 50 cm | 4 m/s · 14.4 km/h | 64 m/s² · 6.526 g |
| 50 cm | 1 m | 8 m/s · 28.8 km/h | 128 m/s² · 13.05 g |
| 1 m | 2 m | 16 m/s · 57.6 km/h | 256 m/s² · 26.1 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 152.79 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 2.546 Hz | Below typical VFD range — use a gearbox |
| 4 | 5.093 Hz | Reachable with a VFD |
| 6 | 7.639 Hz | Reachable with a VFD |
| 8 | 10.19 Hz | Reachable with a VFD |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 50.93 RPM · 5.333 rad/s | ×3 |
| 5:1 | 30.56 RPM · 3.2 rad/s | ×5 |
| 10:1 | 15.28 RPM · 1.6 rad/s | ×10 |
| 30:1 | 5.093 RPM · 0.5333 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 0.128 J |
| 0.01 kg·m² (bench-grinder wheel) | 1.28 J |
| 0.1 kg·m² (car flywheel) | 12.8 J |
| 1 kg·m² (industrial flywheel) | 128 J |
Multiples of this speed
- 0.5× = 8 rad/s76.3944 RPM
- 2× = 32 rad/s305.5775 RPM
- 5× = 80 rad/s763.9437 RPM
- 10× = 160 rad/s1,527.8875 RPM

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 16 radians per second to RPM, multiply 16 by 30 and divide by π: 16 × (30 / π) = 152.7887 RPM (approx. 152.79 RPM).
16 rad/s equals 2.5465 Hz (revolutions per second), calculated by dividing 16 by 2π (approx. 6.283185).
To convert 152.79 RPM back to radians per second, multiply by π and divide by 30: 152.79 × (π / 30) ≈ 16 rad/s.
At 16 rad/s, one full 360° revolution takes 0.3927 seconds (392.70 ms).
16 rad/s is 152.7887 RPM, which a 4-pole induction motor reaches synchronously at 5.093 Hz (f = RPM × poles / 120). Under load it runs roughly 2–4% slower.
Tangential speed is v = ω·r = 16 rad/s × 0.1 m = 1.6 m/s (5.76 km/h), with a centripetal acceleration of ω²·r = 25.6 m/s².