RPM to Radians Per SecondRPM to rad/s

10 Rad/s to RPM Converter

Instant conversion for 10 rad/s to RPM (95.4930 RPM). Analytical 30/π formula, rotational frequency in Hz, and full kinematics.

m
Result95.492966 RPM
RPM
95.492966
Degrees per Second (°/s)
572.9578 °/s
Hertz (Hz)
1.591549 Hz
Revolutions per Second (RPS)
1.591549 rev/s
Revolutions per Hour (RPH)
5,729.578 rev/hr
Revolutions per Day
137,509.87 rev/day
Radians per Minute (rad/min)
600 rad/min
Milliradians per Second (mrad/s)
10,000 mrad/s
Period (seconds per rev)
0.628319 s/rev
Exact Formula
10 × 30/π = 95.492966 RPM
Nearest Real-World Example
Ceiling fan — high (200 RPM)
Precision Drift Meter (Exact π/30 vs. 0.10472 Rounded)Zero Drift Here

Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:

Exact Value (π/30):10.000000 rad/s
Rounded (0.10472):10.000023 rad/s
Angular Error / Hour:4.82° / hr

Worked Conversion: 10 Rad/s to RPM

To convert radians per second (rad/s) to revolutions per minute (RPM), multiply by 60 seconds per minute and divide by 2π radians per revolution. The analytical reciprocal simplifies to 30/π (≈ 9.549297).

RPM = 10 × (30 / π) = 95.4930 RPM

Exact fraction: (10 × 30)/π RPM · Reciprocal: 95.493 RPM × (π/30) = 10 rad/s

Rotational Speed
95.4930 RPM
Frequency
1.5915 Hz
Degrees / Second
572.96 °/s
Period per Rev
0.6283 s
Engineering Context: At 10 rad/s (moderate industrial shaft rotation), 10 rad/s equals 95.493 RPM (1.59 Hz), typical of slow-speed industrial gear motors, mixer shafts, and conveyor drive sprockets.

Forward Conversion: 95 RPM to Rad/s

Need to convert from revolutions per minute back to radians per second? Explore the standard forward converter with exact π/30 precision.

Open 95 RPM Converter →

In-Depth Engineering Guides & References

Rad/s to RPM Converter & Formula (RPM = ω × 30/π)— The reverse factor, worked examples and a rad/s to RPM table.
How to Convert rad/s to RPM, Step by Step— Unit cancellation and exam-style worked problems.
5.36 Rad/s to RPM: Physics Homework Solution— Serway & Halliday kinematics proof and analytical derivation.
RPM to Radians Per Second Formula & Calculus Proof— Dimensional cancellation, π/30 derivation, and IEEE 754 precision.
Angular Velocity Guide & Rotational Kinematics— SI standards, tangential velocity (v = ω·r), and centripetal acceleration.
Complete Conversion Index— Browse all forward and reverse conversion tables.

10 rad/s: exact form, real-world scale & engineering tables

Exact answer in terms of π

10 rad/s = 300/π RPM ≈ 95.492966 RPM

Keep π symbolic through multi-step problems and only round at the end.

Rounding check

Using the rounded factor 9.55 gives 95.5 RPM instead of the exact 95.493 RPM — an error of 0.007034 RPM.

What this speed looks like in practice

At 95.493 RPM a shaft turns about 2.12× as fast as a 7-inch single (45 RPM). A ceiling fan on high turns about 2.09× faster.

Revolutions over time

That is 5,729.6 revolutions per hour and 137,510 per day. A quarter turn (90°) takes 157 ms, and the shaft sweeps 0.573° every millisecond.

Rim speed and centripetal load at ω = 10 rad/s

Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.

RadiusDiameterRim speedCentripetal acceleration
1 cm2 cm0.1 m/s · 0.36 km/h1 m/s² · 0.102 g
5 cm10 cm0.5 m/s · 1.8 km/h5 m/s² · 0.5099 g
10 cm20 cm1 m/s · 3.6 km/h10 m/s² · 1.02 g
25 cm50 cm2.5 m/s · 9 km/h25 m/s² · 2.549 g
50 cm1 m5 m/s · 18 km/h50 m/s² · 5.099 g
1 m2 m10 m/s · 36 km/h100 m/s² · 10.2 g

Driving this speed with an AC motor

Supply frequency an induction motor would need for a synchronous speed of 95.49 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.

PolesSupply frequencyPractical note
21.592 HzBelow typical VFD range — use a gearbox
43.183 HzBelow typical VFD range — use a gearbox
64.775 HzBelow typical VFD range — use a gearbox
86.366 HzReachable with a VFD

Through a reduction gearbox

Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.

RatioOutput speedTorque ×
3:131.83 RPM · 3.333 rad/s×3
5:119.1 RPM · 2 rad/s×5
10:19.549 RPM · 1 rad/s×10
30:13.183 RPM · 0.3333 rad/s×30

Stored rotational energy

Kinetic energy E = ½·I·ω² for a range of moments of inertia.

Moment of inertiaEnergy
0.001 kg·m² (small fan impeller)0.05 J
0.01 kg·m² (bench-grinder wheel)0.5 J
0.1 kg·m² (car flywheel)5 J
1 kg·m² (industrial flywheel)50 J

Multiples of this speed

Rizwan Malik headshot

Rizwan Malik

Founder & Editor

  • Formulas checked against the BIPM SI Brochure
  • Unit definitions per NIST SP 811

Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.

Frequently asked questions