RPM to Radians Per SecondRPM to rad/s

9 Rad/s to RPM Converter

Instant conversion for 9 rad/s to RPM (85.9437 RPM). Analytical 30/π formula, rotational frequency in Hz, and full kinematics.

m
Result85.943669 RPM
RPM
85.943669
Degrees per Second (°/s)
515.66202 °/s
Hertz (Hz)
1.432395 Hz
Revolutions per Second (RPS)
1.432395 rev/s
Revolutions per Hour (RPH)
5,156.6202 rev/hr
Revolutions per Day
123,758.88 rev/day
Radians per Minute (rad/min)
540 rad/min
Milliradians per Second (mrad/s)
9,000 mrad/s
Period (seconds per rev)
0.698132 s/rev
Exact Formula
9 × 30/π = 85.943669 RPM
Nearest Real-World Example
Ceiling fan — high (200 RPM)
Precision Drift Meter (Exact π/30 vs. 0.10472 Rounded)Zero Drift Here

Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:

Exact Value (π/30):9.000000 rad/s
Rounded (0.10472):9.000021 rad/s
Angular Error / Hour:4.34° / hr

Worked Conversion: 9 Rad/s to RPM

To convert radians per second (rad/s) to revolutions per minute (RPM), multiply by 60 seconds per minute and divide by 2π radians per revolution. The analytical reciprocal simplifies to 30/π (≈ 9.549297).

RPM = 9 × (30 / π) = 85.9437 RPM

Exact fraction: (9 × 30)/π RPM · Reciprocal: 85.944 RPM × (π/30) = 9 rad/s

Rotational Speed
85.9437 RPM
Frequency
1.4324 Hz
Degrees / Second
515.66 °/s
Period per Rev
0.6981 s
Engineering Context: At 9 rad/s (moderate machinery speed (85.944 RPM)), At 9 rad/s, the rotor spins at 85.944 RPM (1.43 Hz), commonly encountered in gearboxes and machine tool spindles.

Forward Conversion: 86 RPM to Rad/s

Need to convert from revolutions per minute back to radians per second? Explore the standard forward converter with exact π/30 precision.

Open 86 RPM Converter →

In-Depth Engineering Guides & References

Rad/s to RPM Converter & Formula (RPM = ω × 30/π)— The reverse factor, worked examples and a rad/s to RPM table.
How to Convert rad/s to RPM, Step by Step— Unit cancellation and exam-style worked problems.
5.36 Rad/s to RPM: Physics Homework Solution— Serway & Halliday kinematics proof and analytical derivation.
RPM to Radians Per Second Formula & Calculus Proof— Dimensional cancellation, π/30 derivation, and IEEE 754 precision.
Angular Velocity Guide & Rotational Kinematics— SI standards, tangential velocity (v = ω·r), and centripetal acceleration.
Complete Conversion Index— Browse all forward and reverse conversion tables.

9 rad/s: exact form, real-world scale & engineering tables

Exact answer in terms of π

9 rad/s = 270/π RPM ≈ 85.943669 RPM

Keep π symbolic through multi-step problems and only round at the end.

Rounding check

Using the rounded factor 9.55 gives 85.95 RPM instead of the exact 85.9437 RPM — an error of 0.006331 RPM.

What this speed looks like in practice

At 85.9437 RPM a shaft turns about 1.91× as fast as a 7-inch single (45 RPM). A ceiling fan on high turns about 2.33× faster.

Revolutions over time

That is 5,156.6 revolutions per hour and 123,760 per day. A quarter turn (90°) takes 175 ms, and the shaft sweeps 0.5157° every millisecond.

Rim speed and centripetal load at ω = 9 rad/s

Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.

RadiusDiameterRim speedCentripetal acceleration
1 cm2 cm0.09 m/s · 0.324 km/h0.81 m/s² · 0.0826 g
5 cm10 cm0.45 m/s · 1.62 km/h4.05 m/s² · 0.413 g
10 cm20 cm0.9 m/s · 3.24 km/h8.1 m/s² · 0.826 g
25 cm50 cm2.25 m/s · 8.1 km/h20.25 m/s² · 2.065 g
50 cm1 m4.5 m/s · 16.2 km/h40.5 m/s² · 4.13 g
1 m2 m9 m/s · 32.4 km/h81 m/s² · 8.26 g

Driving this speed with an AC motor

Supply frequency an induction motor would need for a synchronous speed of 85.94 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.

PolesSupply frequencyPractical note
21.432 HzBelow typical VFD range — use a gearbox
42.865 HzBelow typical VFD range — use a gearbox
64.297 HzBelow typical VFD range — use a gearbox
85.73 HzReachable with a VFD

Through a reduction gearbox

Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.

RatioOutput speedTorque ×
3:128.65 RPM · 3 rad/s×3
5:117.19 RPM · 1.8 rad/s×5
10:18.594 RPM · 0.9 rad/s×10
30:12.865 RPM · 0.3 rad/s×30

Stored rotational energy

Kinetic energy E = ½·I·ω² for a range of moments of inertia.

Moment of inertiaEnergy
0.001 kg·m² (small fan impeller)0.0405 J
0.01 kg·m² (bench-grinder wheel)0.405 J
0.1 kg·m² (car flywheel)4.05 J
1 kg·m² (industrial flywheel)40.5 J

Multiples of this speed

Rizwan Malik headshot

Rizwan Malik

Founder & Editor

  • Formulas checked against the BIPM SI Brochure
  • Unit definitions per NIST SP 811

Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.

Frequently asked questions