80 Rad/s to RPM Converter
Instant conversion for 80 rad/s to RPM (763.9437 RPM). Analytical 30/π formula, rotational frequency in Hz, and full kinematics.
- RPM
- 763.94373
- Degrees per Second (°/s)
- 4,583.6624 °/s
- Hertz (Hz)
- 12.732395 Hz
- Revolutions per Second (RPS)
- 12.732395 rev/s
- Revolutions per Hour (RPH)
- 45,836.624 rev/hr
- Revolutions per Day
- 1,100,079 rev/day
- Radians per Minute (rad/min)
- 4,800 rad/min
- Milliradians per Second (mrad/s)
- 80,000 mrad/s
- Period (seconds per rev)
- 0.07854 s/rev
- Exact Formula
- 80 × 30/π = 763.94373 RPM
- Nearest Real-World Example
- Car engine — idle (800 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 80 Rad/s to RPM
To convert radians per second (rad/s) to revolutions per minute (RPM), multiply by 60 seconds per minute and divide by 2π radians per revolution. The analytical reciprocal simplifies to 30/π (≈ 9.549297).
RPM = 80 × (30 / π) = 763.9437 RPM
Exact fraction: (80 × 30)/π RPM · Reciprocal: 763.94 RPM × (π/30) = 80 rad/s
Forward Conversion: 750 RPM to Rad/s
Need to convert from revolutions per minute back to radians per second? Explore the standard forward converter with exact π/30 precision.
In-Depth Engineering Guides & References
80 rad/s: exact form, real-world scale & engineering tables
Exact answer in terms of π
80 rad/s = 2,400/π RPM ≈ 763.943727 RPM
Keep π symbolic through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 9.55 gives 764 RPM instead of the exact 763.9437 RPM — an error of 0.05627 RPM.
What this speed looks like in practice
At 763.9437 RPM a shaft turns about 1.02× as fast as a car engine at idle. A washing machine spin cycle turns about 1.57× faster.
Revolutions over time
That is 45,837 revolutions per hour and 1,100,100 per day. A quarter turn (90°) takes 19.6 ms, and the shaft sweeps 4.584° every millisecond.
Rim speed and centripetal load at ω = 80 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.8 m/s · 2.88 km/h | 64 m/s² · 6.526 g |
| 5 cm | 10 cm | 4 m/s · 14.4 km/h | 320 m/s² · 32.63 g |
| 10 cm | 20 cm | 8 m/s · 28.8 km/h | 640 m/s² · 65.26 g |
| 25 cm | 50 cm | 20 m/s · 72 km/h | 1,600 m/s² · 163.2 g |
| 50 cm | 1 m | 40 m/s · 144 km/h | 3,200 m/s² · 326.3 g |
| 1 m | 2 m | 80 m/s · 288 km/h | 6,400 m/s² · 652.6 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 763.94 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 12.73 Hz | Reachable with a VFD |
| 4 | 25.46 Hz | Reachable with a VFD |
| 6 | 38.2 Hz | Reachable with a VFD |
| 8 | 50.93 Hz | Reachable with a VFD |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 254.6 RPM · 26.67 rad/s | ×3 |
| 5:1 | 152.8 RPM · 16 rad/s | ×5 |
| 10:1 | 76.39 RPM · 8 rad/s | ×10 |
| 30:1 | 25.46 RPM · 2.667 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 3.2 J |
| 0.01 kg·m² (bench-grinder wheel) | 32 J |
| 0.1 kg·m² (car flywheel) | 320 J |
| 1 kg·m² (industrial flywheel) | 3.2 kJ |
Multiples of this speed
- 0.5× = 40 rad/s381.9719 RPM
- 2× = 160 rad/s1,527.8875 RPM
- 5× = 400 rad/s3,819.7186 RPM
- 10× = 800 rad/s7,639.4373 RPM

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 80 radians per second to RPM, multiply 80 by 30 and divide by π: 80 × (30 / π) = 763.9437 RPM (approx. 763.94 RPM).
80 rad/s equals 12.7324 Hz (revolutions per second), calculated by dividing 80 by 2π (approx. 6.283185).
To convert 763.94 RPM back to radians per second, multiply by π and divide by 30: 763.94 × (π / 30) ≈ 80 rad/s.
At 80 rad/s, one full 360° revolution takes 0.0785 seconds (78.54 ms).
80 rad/s is 763.9437 RPM, which a 4-pole induction motor reaches synchronously at 25.4648 Hz (f = RPM × poles / 120). Under load it runs roughly 2–4% slower.
Tangential speed is v = ω·r = 80 rad/s × 0.1 m = 8 m/s (28.8 km/h), with a centripetal acceleration of ω²·r = 640 m/s².