12 Rad/s to RPM Converter
Instant conversion for 12 rad/s to RPM (114.5916 RPM). Analytical 30/π formula, rotational frequency in Hz, and full kinematics.
- RPM
- 114.59156
- Degrees per Second (°/s)
- 687.54935 °/s
- Hertz (Hz)
- 1.909859 Hz
- Revolutions per Second (RPS)
- 1.909859 rev/s
- Revolutions per Hour (RPH)
- 6,875.4935 rev/hr
- Revolutions per Day
- 165,011.84 rev/day
- Radians per Minute (rad/min)
- 720 rad/min
- Milliradians per Second (mrad/s)
- 12,000 mrad/s
- Period (seconds per rev)
- 0.523599 s/rev
- Exact Formula
- 12 × 30/π = 114.59156 RPM
- Nearest Real-World Example
- Ceiling fan — high (200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 12 Rad/s to RPM
To convert radians per second (rad/s) to revolutions per minute (RPM), multiply by 60 seconds per minute and divide by 2π radians per revolution. The analytical reciprocal simplifies to 30/π (≈ 9.549297).
RPM = 12 × (30 / π) = 114.5916 RPM
Exact fraction: (12 × 30)/π RPM · Reciprocal: 114.59 RPM × (π/30) = 12 rad/s
Forward Conversion: 110 RPM to Rad/s
Need to convert from revolutions per minute back to radians per second? Explore the standard forward converter with exact π/30 precision.
In-Depth Engineering Guides & References
12 rad/s: exact form, real-world scale & engineering tables
Exact answer in terms of π
12 rad/s = 360/π RPM ≈ 114.591559 RPM
Keep π symbolic through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 9.55 gives 114.6 RPM instead of the exact 114.5916 RPM — an error of 0.008441 RPM.
What this speed looks like in practice
At 114.5916 RPM a shaft turns about 2.55× as fast as a 7-inch single (45 RPM). A ceiling fan on high turns about 1.75× faster.
Revolutions over time
That is 6,875.5 revolutions per hour and 165,010 per day. A quarter turn (90°) takes 131 ms, and the shaft sweeps 0.6875° every millisecond.
Rim speed and centripetal load at ω = 12 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.12 m/s · 0.432 km/h | 1.44 m/s² · 0.1468 g |
| 5 cm | 10 cm | 0.6 m/s · 2.16 km/h | 7.2 m/s² · 0.7342 g |
| 10 cm | 20 cm | 1.2 m/s · 4.32 km/h | 14.4 m/s² · 1.468 g |
| 25 cm | 50 cm | 3 m/s · 10.8 km/h | 36 m/s² · 3.671 g |
| 50 cm | 1 m | 6 m/s · 21.6 km/h | 72 m/s² · 7.342 g |
| 1 m | 2 m | 12 m/s · 43.2 km/h | 144 m/s² · 14.68 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 114.59 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 1.91 Hz | Below typical VFD range — use a gearbox |
| 4 | 3.82 Hz | Below typical VFD range — use a gearbox |
| 6 | 5.73 Hz | Reachable with a VFD |
| 8 | 7.639 Hz | Reachable with a VFD |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 38.2 RPM · 4 rad/s | ×3 |
| 5:1 | 22.92 RPM · 2.4 rad/s | ×5 |
| 10:1 | 11.46 RPM · 1.2 rad/s | ×10 |
| 30:1 | 3.82 RPM · 0.4 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 0.072 J |
| 0.01 kg·m² (bench-grinder wheel) | 0.72 J |
| 0.1 kg·m² (car flywheel) | 7.2 J |
| 1 kg·m² (industrial flywheel) | 72 J |
Multiples of this speed

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 12 radians per second to RPM, multiply 12 by 30 and divide by π: 12 × (30 / π) = 114.5916 RPM (approx. 114.59 RPM).
12 rad/s equals 1.9099 Hz (revolutions per second), calculated by dividing 12 by 2π (approx. 6.283185).
To convert 114.59 RPM back to radians per second, multiply by π and divide by 30: 114.59 × (π / 30) ≈ 12 rad/s.
At 12 rad/s, one full 360° revolution takes 0.5236 seconds (523.60 ms).
12 rad/s is 114.5916 RPM, which a 4-pole induction motor reaches synchronously at 3.8197 Hz (f = RPM × poles / 120). Under load it runs roughly 2–4% slower.
Tangential speed is v = ω·r = 12 rad/s × 0.1 m = 1.2 m/s (4.32 km/h), with a centripetal acceleration of ω²·r = 14.4 m/s².