12.566 Rad/s to RPM Converter
Instant conversion for 12.566 rad/s to RPM (120.0003 RPM). Analytical 30/π formula, rotational frequency in Hz, and full kinematics.
- RPM
- 120.00028
- Degrees per Second (°/s)
- 720.00168 °/s
- Hertz (Hz)
- 2.000005 Hz
- Revolutions per Second (RPS)
- 2.000005 rev/s
- Revolutions per Hour (RPH)
- 7,200.0168 rev/hr
- Revolutions per Day
- 172,800.4 rev/day
- Radians per Minute (rad/min)
- 753.984 rad/min
- Milliradians per Second (mrad/s)
- 12,566.4 mrad/s
- Period (seconds per rev)
- 0.499999 s/rev
- Exact Formula
- 12.5664 × 30/π = 120.00028 RPM
- Nearest Real-World Example
- Ceiling fan — high (200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 12.566 Rad/s to RPM
To convert radians per second (rad/s) to revolutions per minute (RPM), multiply by 60 seconds per minute and divide by 2π radians per revolution. The analytical reciprocal simplifies to 30/π (≈ 9.549297).
RPM = 12.5664 × (30 / π) = 120.0003 RPM
Exact fraction: (12.5664 × 30)/π RPM · Reciprocal: 120 RPM × (π/30) = 12.566 rad/s
Forward Conversion: 120 RPM to Rad/s
Need to convert from revolutions per minute back to radians per second? Explore the standard forward converter with exact π/30 precision.
In-Depth Engineering Guides & References
12.5664 rad/s: exact form, real-world scale & engineering tables
Exact answer in terms of π
12.5664 rad/s = 376.992/π RPM ≈ 120.000281 RPM
Keep π symbolic through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 9.55 gives 120.0091 RPM instead of the exact 120.0003 RPM — an error of 0.008839 RPM.
What this speed looks like in practice
At 120.0003 RPM a shaft turns about 2.67× as fast as a 7-inch single (45 RPM). A ceiling fan on high turns about 1.67× faster.
Revolutions over time
That is 7,200 revolutions per hour and 172,800 per day. A quarter turn (90°) takes 125 ms, and the shaft sweeps 0.72° every millisecond.
Rim speed and centripetal load at ω = 12.5664 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.1257 m/s · 0.4524 km/h | 1.579 m/s² · 0.161 g |
| 5 cm | 10 cm | 0.6283 m/s · 2.262 km/h | 7.896 m/s² · 0.8051 g |
| 10 cm | 20 cm | 1.257 m/s · 4.524 km/h | 15.79 m/s² · 1.61 g |
| 25 cm | 50 cm | 3.142 m/s · 11.31 km/h | 39.48 m/s² · 4.026 g |
| 50 cm | 1 m | 6.283 m/s · 22.62 km/h | 78.96 m/s² · 8.051 g |
| 1 m | 2 m | 12.57 m/s · 45.24 km/h | 157.9 m/s² · 16.1 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 120 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 2 Hz | Below typical VFD range — use a gearbox |
| 4 | 4 Hz | Below typical VFD range — use a gearbox |
| 6 | 6 Hz | Reachable with a VFD |
| 8 | 8 Hz | Reachable with a VFD |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 40 RPM · 4.189 rad/s | ×3 |
| 5:1 | 24 RPM · 2.513 rad/s | ×5 |
| 10:1 | 12 RPM · 1.257 rad/s | ×10 |
| 30:1 | 4 RPM · 0.4189 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 0.07896 J |
| 0.01 kg·m² (bench-grinder wheel) | 0.7896 J |
| 0.1 kg·m² (car flywheel) | 7.896 J |
| 1 kg·m² (industrial flywheel) | 78.96 J |
Multiples of this speed
- 0.5× = 6.2832 rad/s60.0001 RPM
- 2× = 25.1328 rad/s240.0006 RPM
- 5× = 62.832 rad/s600.0014 RPM
- 10× = 125.664 rad/s1,200.0028 RPM

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 12.566 radians per second to RPM, multiply 12.5664 by 30 and divide by π: 12.5664 × (30 / π) = 120.0003 RPM (approx. 120 RPM).
12.566 rad/s equals 2.0000 Hz (revolutions per second), calculated by dividing 12.5664 by 2π (approx. 6.283185).
To convert 120 RPM back to radians per second, multiply by π and divide by 30: 120 × (π / 30) ≈ 12.566 rad/s.
At 12.566 rad/s, one full 360° revolution takes 0.5 seconds (500.00 ms).
12.566 rad/s is 120.0003 RPM, which a 4-pole induction motor reaches synchronously at 4 Hz (f = RPM × poles / 120). Under load it runs roughly 2–4% slower.
Tangential speed is v = ω·r = 12.5664 rad/s × 0.1 m = 1.2566 m/s (4.5239 km/h), with a centripetal acceleration of ω²·r = 15.7914 m/s².