600 Rad/s to RPM Converter
Instant conversion for 600 rad/s to RPM (5729.5780 RPM). Analytical 30/π formula, rotational frequency in Hz, and full kinematics.
- RPM
- 5,729.578
- Degrees per Second (°/s)
- 34,377.468 °/s
- Hertz (Hz)
- 95.492966 Hz
- Revolutions per Second (RPS)
- 95.492966 rev/s
- Revolutions per Hour (RPH)
- 343,774.68 rev/hr
- Revolutions per Day
- 8,250,592.2 rev/day
- Radians per Minute (rad/min)
- 36,000 rad/min
- Milliradians per Second (mrad/s)
- 600,000 mrad/s
- Period (seconds per rev)
- 0.010472 s/rev
- Exact Formula
- 600 × 30/π = 5,729.578 RPM
- Nearest Real-World Example
- Hard drive (5,400 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 600 Rad/s to RPM
To convert radians per second (rad/s) to revolutions per minute (RPM), multiply by 60 seconds per minute and divide by 2π radians per revolution. The analytical reciprocal simplifies to 30/π (≈ 9.549297).
RPM = 600 × (30 / π) = 5729.5780 RPM
Exact fraction: (600 × 30)/π RPM · Reciprocal: 5729.6 RPM × (π/30) = 600 rad/s
Forward Conversion: 5,800 RPM to Rad/s
Need to convert from revolutions per minute back to radians per second? Explore the standard forward converter with exact π/30 precision.
In-Depth Engineering Guides & References
600 rad/s: exact form, real-world scale & engineering tables
Exact answer in terms of π
600 rad/s = 18,000/π RPM ≈ 5,729.577951 RPM
Keep π symbolic through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 9.55 gives 5,730 RPM instead of the exact 5,729.578 RPM — an error of 0.422 RPM.
What this speed looks like in practice
At 5,729.578 RPM a shaft turns about 1.06× as fast as a laptop hard drive (5,400 RPM). A desktop hard drive (7,200 RPM) turns about 1.26× faster.
Revolutions over time
That is 343,770 revolutions per hour and 8,250,600 per day. A quarter turn (90°) takes 2.62 ms, and the shaft sweeps 34.38° every millisecond.
Rim speed and centripetal load at ω = 600 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 6 m/s · 21.6 km/h | 3,600 m/s² · 367.1 g |
| 5 cm | 10 cm | 30 m/s · 108 km/h | 18,000 m/s² · 1,835 g |
| 10 cm | 20 cm | 60 m/s · 216 km/h | 36,000 m/s² · 3,671 g |
| 25 cm | 50 cm | 150 m/s · 540 km/h | 90,000 m/s² · 9,177 g |
| 50 cm | 1 m | 300 m/s · 1,080 km/h | 180,000 m/s² · 18,350 g |
| 1 m | 2 m | 600 m/s · 2,160 km/h | 360,000 m/s² · 36,710 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 5,729.58 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 95.49 Hz | Reachable with a VFD |
| 4 | 191 Hz | Above typical VFD range |
| 6 | 286.5 Hz | Above typical VFD range |
| 8 | 382 Hz | Above typical VFD range |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 1,910 RPM · 200 rad/s | ×3 |
| 5:1 | 1,146 RPM · 120 rad/s | ×5 |
| 10:1 | 573 RPM · 60 rad/s | ×10 |
| 30:1 | 191 RPM · 20 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 180 J |
| 0.01 kg·m² (bench-grinder wheel) | 1.8 kJ |
| 0.1 kg·m² (car flywheel) | 18 kJ |
| 1 kg·m² (industrial flywheel) | 180 kJ |
Multiples of this speed
- 0.5× = 300 rad/s2,864.789 RPM
- 2× = 1,200 rad/s11,459.1559 RPM
- 5× = 3,000 rad/s28,647.8898 RPM
- 10× = 6,000 rad/s57,295.7795 RPM

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 600 radians per second to RPM, multiply 600 by 30 and divide by π: 600 × (30 / π) = 5729.5780 RPM (approx. 5729.6 RPM).
600 rad/s equals 95.4930 Hz (revolutions per second), calculated by dividing 600 by 2π (approx. 6.283185).
To convert 5729.6 RPM back to radians per second, multiply by π and divide by 30: 5729.6 × (π / 30) ≈ 600 rad/s.
At 600 rad/s, one full 360° revolution takes 0.0105 seconds (10.47 ms).
600 rad/s is 5729.5780 RPM, which a 4-pole induction motor reaches synchronously at 190.9859 Hz (f = RPM × poles / 120). Under load it runs roughly 2–4% slower.
Tangential speed is v = ω·r = 600 rad/s × 0.1 m = 60 m/s (216 km/h), with a centripetal acceleration of ω²·r = 36000 m/s².