500 Rad/s to RPM Converter
Instant conversion for 500 rad/s to RPM (4774.6483 RPM). Analytical 30/π formula, rotational frequency in Hz, and full kinematics.
- RPM
- 4,774.6483
- Degrees per Second (°/s)
- 28,647.89 °/s
- Hertz (Hz)
- 79.577472 Hz
- Revolutions per Second (RPS)
- 79.577472 rev/s
- Revolutions per Hour (RPH)
- 286,478.9 rev/hr
- Revolutions per Day
- 6,875,493.5 rev/day
- Radians per Minute (rad/min)
- 30,000 rad/min
- Milliradians per Second (mrad/s)
- 500,000 mrad/s
- Period (seconds per rev)
- 0.012566 s/rev
- Exact Formula
- 500 × 30/π = 4,774.6483 RPM
- Nearest Real-World Example
- Hard drive (5,400 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 500 Rad/s to RPM
To convert radians per second (rad/s) to revolutions per minute (RPM), multiply by 60 seconds per minute and divide by 2π radians per revolution. The analytical reciprocal simplifies to 30/π (≈ 9.549297).
RPM = 500 × (30 / π) = 4774.6483 RPM
Exact fraction: (500 × 30)/π RPM · Reciprocal: 4774.6 RPM × (π/30) = 500 rad/s
Forward Conversion: 5,000 RPM to Rad/s
Need to convert from revolutions per minute back to radians per second? Explore the standard forward converter with exact π/30 precision.
In-Depth Engineering Guides & References
500 rad/s: exact form, real-world scale & engineering tables
Exact answer in terms of π
500 rad/s = 15,000/π RPM ≈ 4,774.648293 RPM
Keep π symbolic through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 9.55 gives 4,775 RPM instead of the exact 4,774.6483 RPM — an error of 0.3517 RPM.
What this speed looks like in practice
At 4,774.6483 RPM a shaft turns about 2.65× as fast as a 4-pole motor on a 60 Hz grid. A laptop hard drive (5,400 RPM) turns about 1.13× faster.
Revolutions over time
That is 286,480 revolutions per hour and 6,875,500 per day. A quarter turn (90°) takes 3.14 ms, and the shaft sweeps 28.65° every millisecond.
Rim speed and centripetal load at ω = 500 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 5 m/s · 18 km/h | 2,500 m/s² · 254.9 g |
| 5 cm | 10 cm | 25 m/s · 90 km/h | 12,500 m/s² · 1,275 g |
| 10 cm | 20 cm | 50 m/s · 180 km/h | 25,000 m/s² · 2,549 g |
| 25 cm | 50 cm | 125 m/s · 450 km/h | 62,500 m/s² · 6,373 g |
| 50 cm | 1 m | 250 m/s · 900 km/h | 125,000 m/s² · 12,750 g |
| 1 m | 2 m | 500 m/s · 1,800 km/h | 250,000 m/s² · 25,490 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 4,774.65 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 79.58 Hz | Reachable with a VFD |
| 4 | 159.2 Hz | Above typical VFD range |
| 6 | 238.7 Hz | Above typical VFD range |
| 8 | 318.3 Hz | Above typical VFD range |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 1,592 RPM · 166.7 rad/s | ×3 |
| 5:1 | 954.9 RPM · 100 rad/s | ×5 |
| 10:1 | 477.5 RPM · 50 rad/s | ×10 |
| 30:1 | 159.2 RPM · 16.67 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 125 J |
| 0.01 kg·m² (bench-grinder wheel) | 1.25 kJ |
| 0.1 kg·m² (car flywheel) | 12.5 kJ |
| 1 kg·m² (industrial flywheel) | 125 kJ |
Multiples of this speed
- 0.5× = 250 rad/s2,387.3241 RPM
- 2× = 1,000 rad/s9,549.2966 RPM
- 5× = 2,500 rad/s23,873.2415 RPM
- 10× = 5,000 rad/s47,746.4829 RPM

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 500 radians per second to RPM, multiply 500 by 30 and divide by π: 500 × (30 / π) = 4774.6483 RPM (approx. 4774.6 RPM).
500 rad/s equals 79.5775 Hz (revolutions per second), calculated by dividing 500 by 2π (approx. 6.283185).
To convert 4774.6 RPM back to radians per second, multiply by π and divide by 30: 4774.6 × (π / 30) ≈ 500 rad/s.
At 500 rad/s, one full 360° revolution takes 0.0126 seconds (12.57 ms).
500 rad/s is 4774.6483 RPM, which a 4-pole induction motor reaches synchronously at 159.1549 Hz (f = RPM × poles / 120). Under load it runs roughly 2–4% slower.
Tangential speed is v = ω·r = 500 rad/s × 0.1 m = 50 m/s (180 km/h), with a centripetal acceleration of ω²·r = 25000 m/s².