350 Rad/s to RPM Converter
Instant conversion for 350 rad/s to RPM (3342.2538 RPM). Analytical 30/π formula, rotational frequency in Hz, and full kinematics.
- RPM
- 3,342.2538
- Degrees per Second (°/s)
- 20,053.523 °/s
- Hertz (Hz)
- 55.70423 Hz
- Revolutions per Second (RPS)
- 55.70423 rev/s
- Revolutions per Hour (RPH)
- 200,535.23 rev/hr
- Revolutions per Day
- 4,812,845.5 rev/day
- Radians per Minute (rad/min)
- 21,000 rad/min
- Milliradians per Second (mrad/s)
- 350,000 mrad/s
- Period (seconds per rev)
- 0.017952 s/rev
- Exact Formula
- 350 × 30/π = 3,342.2538 RPM
- Nearest Real-World Example
- Car engine — highway (2,500 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 350 Rad/s to RPM
To convert radians per second (rad/s) to revolutions per minute (RPM), multiply by 60 seconds per minute and divide by 2π radians per revolution. The analytical reciprocal simplifies to 30/π (≈ 9.549297).
RPM = 350 × (30 / π) = 3342.2538 RPM
Exact fraction: (350 × 30)/π RPM · Reciprocal: 3342.3 RPM × (π/30) = 350 rad/s
Forward Conversion: 3,400 RPM to Rad/s
Need to convert from revolutions per minute back to radians per second? Explore the standard forward converter with exact π/30 precision.
In-Depth Engineering Guides & References
350 rad/s: exact form, real-world scale & engineering tables
Exact answer in terms of π
350 rad/s = 10,500/π RPM ≈ 3,342.253805 RPM
Keep π symbolic through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 9.55 gives 3,342.5 RPM instead of the exact 3,342.2538 RPM — an error of 0.2462 RPM.
What this speed looks like in practice
At 3,342.2538 RPM a shaft turns about 1.86× as fast as a 4-pole motor on a 60 Hz grid. A laptop hard drive (5,400 RPM) turns about 1.62× faster.
Revolutions over time
That is 200,540 revolutions per hour and 4,812,800 per day. A quarter turn (90°) takes 4.49 ms, and the shaft sweeps 20.05° every millisecond.
Rim speed and centripetal load at ω = 350 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 3.5 m/s · 12.6 km/h | 1,225 m/s² · 124.9 g |
| 5 cm | 10 cm | 17.5 m/s · 63 km/h | 6,125 m/s² · 624.6 g |
| 10 cm | 20 cm | 35 m/s · 126 km/h | 12,250 m/s² · 1,249 g |
| 25 cm | 50 cm | 87.5 m/s · 315 km/h | 30,630 m/s² · 3,123 g |
| 50 cm | 1 m | 175 m/s · 630 km/h | 61,250 m/s² · 6,246 g |
| 1 m | 2 m | 350 m/s · 1,260 km/h | 122,500 m/s² · 12,490 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 3,342.25 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 55.7 Hz | Reachable with a VFD |
| 4 | 111.4 Hz | Reachable with a VFD |
| 6 | 167.1 Hz | Above typical VFD range |
| 8 | 222.8 Hz | Above typical VFD range |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 1,114 RPM · 116.7 rad/s | ×3 |
| 5:1 | 668.5 RPM · 70 rad/s | ×5 |
| 10:1 | 334.2 RPM · 35 rad/s | ×10 |
| 30:1 | 111.4 RPM · 11.67 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 61.25 J |
| 0.01 kg·m² (bench-grinder wheel) | 612.5 J |
| 0.1 kg·m² (car flywheel) | 6.125 kJ |
| 1 kg·m² (industrial flywheel) | 61.25 kJ |
Multiples of this speed
- 0.5× = 175 rad/s1,671.1269 RPM
- 2× = 700 rad/s6,684.5076 RPM
- 5× = 1,750 rad/s16,711.269 RPM
- 10× = 3,500 rad/s33,422.538 RPM

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 350 radians per second to RPM, multiply 350 by 30 and divide by π: 350 × (30 / π) = 3342.2538 RPM (approx. 3342.3 RPM).
350 rad/s equals 55.7042 Hz (revolutions per second), calculated by dividing 350 by 2π (approx. 6.283185).
To convert 3342.3 RPM back to radians per second, multiply by π and divide by 30: 3342.3 × (π / 30) ≈ 350 rad/s.
At 350 rad/s, one full 360° revolution takes 0.018 seconds (17.95 ms).
350 rad/s is 3342.2538 RPM, which a 4-pole induction motor reaches synchronously at 111.4085 Hz (f = RPM × poles / 120). Under load it runs roughly 2–4% slower.
Tangential speed is v = ω·r = 350 rad/s × 0.1 m = 35 m/s (126 km/h), with a centripetal acceleration of ω²·r = 12250 m/s².