5,800 RPM to Radians Per Second Converter
Instant conversion for 5,800 RPM to rad/s (607.374580 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 607.37458
- Degrees per Second (°/s)
- 34,800 °/s
- Hertz (Hz)
- 96.666667 Hz
- Revolutions per Second (RPS)
- 96.666667 rev/s
- Revolutions per Hour (RPH)
- 348,000 rev/hr
- Revolutions per Day
- 8,352,000 rev/day
- Radians per Minute (rad/min)
- 36,442.475 rad/min
- Milliradians per Second (mrad/s)
- 607,374.58 mrad/s
- Period (seconds per rev)
- 0.010345 s/rev
- Exact Formula
- 5800 × π/30 = 607.37458 rad/s
- Nearest Real-World Example
- Hard drive (5,400 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 5,800 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 5800 × (π / 30) = 607.374580 rad/s
Exact fraction: 5800π/30 rad/s · Reciprocal: 607.37 rad/s × (30/π) = 5,800 RPM
Reverse Conversion: 607.37 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
5,800 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
5,800 RPM = 580π/3 rad/s ≈ 607.37458 rad/s
Reduced fraction — keep this form through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 607.26 rad/s instead of the exact 607.3746 rad/s — an error of 0.1146 rad/s.
What this speed looks like in practice
At 5,800 RPM a shaft turns about 1.07× as fast as a laptop hard drive (5,400 RPM). A desktop hard drive (7,200 RPM) turns about 1.24× faster.
Revolutions over time
That is 348,000 revolutions per hour and 8,352,000 per day. A quarter turn (90°) takes 2.59 ms, and the shaft sweeps 34.8° every millisecond.
Rim speed and centripetal load at ω = 607.3746 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 6.074 m/s · 21.87 km/h | 3,689 m/s² · 376.2 g |
| 5 cm | 10 cm | 30.37 m/s · 109.3 km/h | 18,450 m/s² · 1,881 g |
| 10 cm | 20 cm | 60.74 m/s · 218.7 km/h | 36,890 m/s² · 3,762 g |
| 25 cm | 50 cm | 151.8 m/s · 546.6 km/h | 92,230 m/s² · 9,404 g |
| 50 cm | 1 m | 303.7 m/s · 1,093 km/h | 184,500 m/s² · 18,810 g |
| 1 m | 2 m | 607.4 m/s · 2,187 km/h | 368,900 m/s² · 37,620 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 5,800 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 96.67 Hz | Reachable with a VFD |
| 4 | 193.3 Hz | Above typical VFD range |
| 6 | 290 Hz | Above typical VFD range |
| 8 | 386.7 Hz | Above typical VFD range |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 1,933 RPM · 202.5 rad/s | ×3 |
| 5:1 | 1,160 RPM · 121.5 rad/s | ×5 |
| 10:1 | 580 RPM · 60.74 rad/s | ×10 |
| 30:1 | 193.3 RPM · 20.25 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 184.5 J |
| 0.01 kg·m² (bench-grinder wheel) | 1.845 kJ |
| 0.1 kg·m² (car flywheel) | 18.45 kJ |
| 1 kg·m² (industrial flywheel) | 184.5 kJ |
Multiples of this speed
- 0.5× = 2,900 RPM303.6873 rad/s
- 2× = 11,600 RPM1,214.7492 rad/s
- 5× = 29,000 RPM3,036.8729 rad/s
- 10× = 58,000 RPM6,073.7458 rad/s

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 5,800 RPM to radians per second, multiply 5800 by π and divide by 30: 5800 × (π / 30) = 607.374580 rad/s (approx. 607.37 rad/s).
5,800 RPM equals 96.6667 Hz (revolutions per second), calculated by dividing 5800 by 60 seconds.
To convert 607.37 rad/s back to RPM, multiply by 30 and divide by π: 607.37 × (30 / π) ≈ 5,800 RPM.
At 5,800 RPM, one full 360° revolution takes 0.0103 seconds (10.34 ms).
A 4-pole induction motor has a synchronous speed of 5,800 RPM at 193.3333 Hz (f = RPM × poles / 120 = 5800 × 4 / 120). That is beyond a standard motor and drive, so this speed calls for a high-speed spindle motor or a step-up transmission.
Tangential speed is v = ω·r = 607.374580 rad/s × 0.1 m = 60.7375 m/s (218.6548 km/h). The centripetal acceleration at the rim is ω²·r = 36890.388 m/s².