1,000 Rad/s to RPM Converter
Instant conversion for 1,000 rad/s to RPM (9549.2966 RPM). Analytical 30/π formula, rotational frequency in Hz, and full kinematics.
- RPM
- 9,549.2966
- Degrees per Second (°/s)
- 57,295.78 °/s
- Hertz (Hz)
- 159.15494 Hz
- Revolutions per Second (RPS)
- 159.15494 rev/s
- Revolutions per Hour (RPH)
- 572,957.8 rev/hr
- Revolutions per Day
- 13,750,987 rev/day
- Radians per Minute (rad/min)
- 60,000 rad/min
- Milliradians per Second (mrad/s)
- 1,000,000 mrad/s
- Period (seconds per rev)
- 0.006283 s/rev
- Exact Formula
- 1000 × 30/π = 9,549.2966 RPM
- Nearest Real-World Example
- Angle grinder (11,000 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 1,000 Rad/s to RPM
To convert radians per second (rad/s) to revolutions per minute (RPM), multiply by 60 seconds per minute and divide by 2π radians per revolution. The analytical reciprocal simplifies to 30/π (≈ 9.549297).
RPM = 1000 × (30 / π) = 9549.2966 RPM
Exact fraction: (1000 × 30)/π RPM · Reciprocal: 9549.3 RPM × (π/30) = 1,000 rad/s
Forward Conversion: 10,000 RPM to Rad/s
Need to convert from revolutions per minute back to radians per second? Explore the standard forward converter with exact π/30 precision.
In-Depth Engineering Guides & References
1,000 rad/s: exact form, real-world scale & engineering tables
Exact answer in terms of π
1,000 rad/s = 30,000/π RPM ≈ 9,549.296586 RPM
Keep π symbolic through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 9.55 gives 9,550 RPM instead of the exact 9,549.2966 RPM — an error of 0.7034 RPM.
What this speed looks like in practice
At 9,549.2966 RPM a shaft turns about 1.33× as fast as a desktop hard drive (7,200 RPM). A 115 mm angle grinder turns about 1.15× faster.
Revolutions over time
That is 572,960 revolutions per hour and 13,751,000 per day. A quarter turn (90°) takes 1.57 ms, and the shaft sweeps 57.3° every millisecond.
Rim speed and centripetal load at ω = 1,000 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 10 m/s · 36 km/h | 10,000 m/s² · 1,020 g |
| 5 cm | 10 cm | 50 m/s · 180 km/h | 50,000 m/s² · 5,099 g |
| 10 cm | 20 cm | 100 m/s · 360 km/h | 100,000 m/s² · 10,200 g |
| 25 cm | 50 cm | 250 m/s · 900 km/h | 250,000 m/s² · 25,490 g |
| 50 cm | 1 m | 500 m/s · 1,800 km/h | 500,000 m/s² · 50,990 g |
| 1 m | 2 m | 1,000 m/s · 3,600 km/h | 1,000,000 m/s² · 102,000 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 9,549.3 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 159.2 Hz | Above typical VFD range |
| 4 | 318.3 Hz | Above typical VFD range |
| 6 | 477.5 Hz | Above typical VFD range |
| 8 | 636.6 Hz | Above typical VFD range |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 3,183 RPM · 333.3 rad/s | ×3 |
| 5:1 | 1,910 RPM · 200 rad/s | ×5 |
| 10:1 | 954.9 RPM · 100 rad/s | ×10 |
| 30:1 | 318.3 RPM · 33.33 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 500 J |
| 0.01 kg·m² (bench-grinder wheel) | 5 kJ |
| 0.1 kg·m² (car flywheel) | 50 kJ |
| 1 kg·m² (industrial flywheel) | 500 kJ |
Multiples of this speed
- 0.5× = 500 rad/s4,774.6483 RPM
- 2× = 2,000 rad/s19,098.5932 RPM
- 5× = 5,000 rad/s47,746.4829 RPM
- 10× = 10,000 rad/s95,492.9659 RPM

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 1,000 radians per second to RPM, multiply 1000 by 30 and divide by π: 1000 × (30 / π) = 9549.2966 RPM (approx. 9549.3 RPM).
1,000 rad/s equals 159.1549 Hz (revolutions per second), calculated by dividing 1000 by 2π (approx. 6.283185).
To convert 9549.3 RPM back to radians per second, multiply by π and divide by 30: 9549.3 × (π / 30) ≈ 1,000 rad/s.
At 1,000 rad/s, one full 360° revolution takes 0.0063 seconds (6.28 ms).
1,000 rad/s is 9549.2966 RPM, which a 4-pole induction motor reaches synchronously at 318.3099 Hz (f = RPM × poles / 120). Under load it runs roughly 2–4% slower.
Tangential speed is v = ω·r = 1000 rad/s × 0.1 m = 100 m/s (360 km/h), with a centripetal acceleration of ω²·r = 100000 m/s².