700 Rad/s to RPM Converter
Instant conversion for 700 rad/s to RPM (6684.5076 RPM). Analytical 30/π formula, rotational frequency in Hz, and full kinematics.
- RPM
- 6,684.5076
- Degrees per Second (°/s)
- 40,107.046 °/s
- Hertz (Hz)
- 111.40846 Hz
- Revolutions per Second (RPS)
- 111.40846 rev/s
- Revolutions per Hour (RPH)
- 401,070.46 rev/hr
- Revolutions per Day
- 9,625,691 rev/day
- Radians per Minute (rad/min)
- 42,000 rad/min
- Milliradians per Second (mrad/s)
- 700,000 mrad/s
- Period (seconds per rev)
- 0.008976 s/rev
- Exact Formula
- 700 × 30/π = 6,684.5076 RPM
- Nearest Real-World Example
- Car engine — redline (7,000 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 700 Rad/s to RPM
To convert radians per second (rad/s) to revolutions per minute (RPM), multiply by 60 seconds per minute and divide by 2π radians per revolution. The analytical reciprocal simplifies to 30/π (≈ 9.549297).
RPM = 700 × (30 / π) = 6684.5076 RPM
Exact fraction: (700 × 30)/π RPM · Reciprocal: 6684.5 RPM × (π/30) = 700 rad/s
Forward Conversion: 6,500 RPM to Rad/s
Need to convert from revolutions per minute back to radians per second? Explore the standard forward converter with exact π/30 precision.
In-Depth Engineering Guides & References
700 rad/s: exact form, real-world scale & engineering tables
Exact answer in terms of π
700 rad/s = 21,000/π RPM ≈ 6,684.50761 RPM
Keep π symbolic through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 9.55 gives 6,685 RPM instead of the exact 6,684.5076 RPM — an error of 0.4924 RPM.
What this speed looks like in practice
At 6,684.5076 RPM a shaft turns about 1.24× as fast as a laptop hard drive (5,400 RPM). A desktop hard drive (7,200 RPM) turns about 1.08× faster.
Revolutions over time
That is 401,070 revolutions per hour and 9,625,700 per day. A quarter turn (90°) takes 2.24 ms, and the shaft sweeps 40.11° every millisecond.
Rim speed and centripetal load at ω = 700 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 7 m/s · 25.2 km/h | 4,900 m/s² · 499.7 g |
| 5 cm | 10 cm | 35 m/s · 126 km/h | 24,500 m/s² · 2,498 g |
| 10 cm | 20 cm | 70 m/s · 252 km/h | 49,000 m/s² · 4,997 g |
| 25 cm | 50 cm | 175 m/s · 630 km/h | 122,500 m/s² · 12,490 g |
| 50 cm | 1 m | 350 m/s · 1,260 km/h | 245,000 m/s² · 24,980 g |
| 1 m | 2 m | 700 m/s · 2,520 km/h | 490,000 m/s² · 49,970 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 6,684.51 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 111.4 Hz | Reachable with a VFD |
| 4 | 222.8 Hz | Above typical VFD range |
| 6 | 334.2 Hz | Above typical VFD range |
| 8 | 445.6 Hz | Above typical VFD range |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 2,228 RPM · 233.3 rad/s | ×3 |
| 5:1 | 1,337 RPM · 140 rad/s | ×5 |
| 10:1 | 668.5 RPM · 70 rad/s | ×10 |
| 30:1 | 222.8 RPM · 23.33 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 245 J |
| 0.01 kg·m² (bench-grinder wheel) | 2.45 kJ |
| 0.1 kg·m² (car flywheel) | 24.5 kJ |
| 1 kg·m² (industrial flywheel) | 245 kJ |
Multiples of this speed
- 0.5× = 350 rad/s3,342.2538 RPM
- 2× = 1,400 rad/s13,369.0152 RPM
- 5× = 3,500 rad/s33,422.538 RPM
- 10× = 7,000 rad/s66,845.0761 RPM

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 700 radians per second to RPM, multiply 700 by 30 and divide by π: 700 × (30 / π) = 6684.5076 RPM (approx. 6684.5 RPM).
700 rad/s equals 111.4085 Hz (revolutions per second), calculated by dividing 700 by 2π (approx. 6.283185).
To convert 6684.5 RPM back to radians per second, multiply by π and divide by 30: 6684.5 × (π / 30) ≈ 700 rad/s.
At 700 rad/s, one full 360° revolution takes 0.009 seconds (8.98 ms).
700 rad/s is 6684.5076 RPM, which a 4-pole induction motor reaches synchronously at 222.8169 Hz (f = RPM × poles / 120). Under load it runs roughly 2–4% slower.
Tangential speed is v = ω·r = 700 rad/s × 0.1 m = 70 m/s (252 km/h), with a centripetal acceleration of ω²·r = 49000 m/s².