RPM to Radians Per SecondRPM to rad/s

300 Rad/s to RPM Converter

Instant conversion for 300 rad/s to RPM (2864.7890 RPM). Analytical 30/π formula, rotational frequency in Hz, and full kinematics.

m
Result2,864.789 RPM
RPM
2,864.789
Degrees per Second (°/s)
17,188.734 °/s
Hertz (Hz)
47.746483 Hz
Revolutions per Second (RPS)
47.746483 rev/s
Revolutions per Hour (RPH)
171,887.34 rev/hr
Revolutions per Day
4,125,296.1 rev/day
Radians per Minute (rad/min)
18,000 rad/min
Milliradians per Second (mrad/s)
300,000 mrad/s
Period (seconds per rev)
0.020944 s/rev
Exact Formula
300 × 30/π = 2,864.789 RPM
Nearest Real-World Example
Car engine — highway (2,500 RPM)
Precision Drift Meter (Exact π/30 vs. 0.10472 Rounded)Zero Drift Here

Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:

Exact Value (π/30):300.000000 rad/s
Rounded (0.10472):300.000702 rad/s
Angular Error / Hour:144.70° / hr

Worked Conversion: 300 Rad/s to RPM

To convert radians per second (rad/s) to revolutions per minute (RPM), multiply by 60 seconds per minute and divide by 2π radians per revolution. The analytical reciprocal simplifies to 30/π (≈ 9.549297).

RPM = 300 × (30 / π) = 2864.7890 RPM

Exact fraction: (300 × 30)/π RPM · Reciprocal: 2864.8 RPM × (π/30) = 300 rad/s

Rotational Speed
2864.7890 RPM
Frequency
47.7465 Hz
Degrees / Second
17,188.73 °/s
Period per Rev
0.0209 s
Engineering Context: At 300 rad/s (high-velocity rotational dynamics (2864.8 RPM)), At 300 rad/s, the rotating element turns at 2864.8 RPM (47.7 Hz), requiring precision dynamic balancing and high-speed bearing lubrication.

Forward Conversion: 2,850 RPM to Rad/s

Need to convert from revolutions per minute back to radians per second? Explore the standard forward converter with exact π/30 precision.

Open 2,850 RPM Converter →

In-Depth Engineering Guides & References

Rad/s to RPM Converter & Formula (RPM = ω × 30/π)— The reverse factor, worked examples and a rad/s to RPM table.
How to Convert rad/s to RPM, Step by Step— Unit cancellation and exam-style worked problems.
5.36 Rad/s to RPM: Physics Homework Solution— Serway & Halliday kinematics proof and analytical derivation.
RPM to Radians Per Second Formula & Calculus Proof— Dimensional cancellation, π/30 derivation, and IEEE 754 precision.
Angular Velocity Guide & Rotational Kinematics— SI standards, tangential velocity (v = ω·r), and centripetal acceleration.
Complete Conversion Index— Browse all forward and reverse conversion tables.

300 rad/s: exact form, real-world scale & engineering tables

Exact answer in terms of π

300 rad/s = 9,000/π RPM ≈ 2,864.788976 RPM

Keep π symbolic through multi-step problems and only round at the end.

Rounding check

Using the rounded factor 9.55 gives 2,865 RPM instead of the exact 2,864.789 RPM — an error of 0.211 RPM.

What this speed looks like in practice

At 2,864.789 RPM a shaft turns about 1.59× as fast as a 4-pole motor on a 60 Hz grid. A laptop hard drive (5,400 RPM) turns about 1.88× faster.

Revolutions over time

That is 171,890 revolutions per hour and 4,125,300 per day. A quarter turn (90°) takes 5.24 ms, and the shaft sweeps 17.19° every millisecond.

Rim speed and centripetal load at ω = 300 rad/s

Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.

RadiusDiameterRim speedCentripetal acceleration
1 cm2 cm3 m/s · 10.8 km/h900 m/s² · 91.77 g
5 cm10 cm15 m/s · 54 km/h4,500 m/s² · 458.9 g
10 cm20 cm30 m/s · 108 km/h9,000 m/s² · 917.7 g
25 cm50 cm75 m/s · 270 km/h22,500 m/s² · 2,294 g
50 cm1 m150 m/s · 540 km/h45,000 m/s² · 4,589 g
1 m2 m300 m/s · 1,080 km/h90,000 m/s² · 9,177 g

Driving this speed with an AC motor

Supply frequency an induction motor would need for a synchronous speed of 2,864.79 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.

PolesSupply frequencyPractical note
247.75 HzReachable with a VFD
495.49 HzReachable with a VFD
6143.2 HzAbove typical VFD range
8191 HzAbove typical VFD range

Through a reduction gearbox

Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.

RatioOutput speedTorque ×
3:1954.9 RPM · 100 rad/s×3
5:1573 RPM · 60 rad/s×5
10:1286.5 RPM · 30 rad/s×10
30:195.49 RPM · 10 rad/s×30

Stored rotational energy

Kinetic energy E = ½·I·ω² for a range of moments of inertia.

Moment of inertiaEnergy
0.001 kg·m² (small fan impeller)45 J
0.01 kg·m² (bench-grinder wheel)450 J
0.1 kg·m² (car flywheel)4.5 kJ
1 kg·m² (industrial flywheel)45 kJ

Multiples of this speed

Rizwan Malik headshot

Rizwan Malik

Founder & Editor

  • Formulas checked against the BIPM SI Brochure
  • Unit definitions per NIST SP 811

Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.

Frequently asked questions