25 Rad/s to RPM Converter
Instant conversion for 25 rad/s to RPM (238.7324 RPM). Analytical 30/π formula, rotational frequency in Hz, and full kinematics.
- RPM
- 238.73241
- Degrees per Second (°/s)
- 1,432.3945 °/s
- Hertz (Hz)
- 3.978874 Hz
- Revolutions per Second (RPS)
- 3.978874 rev/s
- Revolutions per Hour (RPH)
- 14,323.945 rev/hr
- Revolutions per Day
- 343,774.68 rev/day
- Radians per Minute (rad/min)
- 1,500 rad/min
- Milliradians per Second (mrad/s)
- 25,000 mrad/s
- Period (seconds per rev)
- 0.251327 s/rev
- Exact Formula
- 25 × 30/π = 238.73241 RPM
- Nearest Real-World Example
- Ceiling fan — high (200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 25 Rad/s to RPM
To convert radians per second (rad/s) to revolutions per minute (RPM), multiply by 60 seconds per minute and divide by 2π radians per revolution. The analytical reciprocal simplifies to 30/π (≈ 9.549297).
RPM = 25 × (30 / π) = 238.7324 RPM
Exact fraction: (25 × 30)/π RPM · Reciprocal: 238.73 RPM × (π/30) = 25 rad/s
Forward Conversion: 250 RPM to Rad/s
Need to convert from revolutions per minute back to radians per second? Explore the standard forward converter with exact π/30 precision.
In-Depth Engineering Guides & References
25 rad/s: exact form, real-world scale & engineering tables
Exact answer in terms of π
25 rad/s = 750/π RPM ≈ 238.732415 RPM
Keep π symbolic through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 9.55 gives 238.75 RPM instead of the exact 238.7324 RPM — an error of 0.01759 RPM.
What this speed looks like in practice
At 238.7324 RPM a shaft turns about 1.19× as fast as a ceiling fan on high. A car engine at idle turns about 3.14× faster.
Revolutions over time
That is 14,324 revolutions per hour and 343,770 per day. A quarter turn (90°) takes 62.8 ms, and the shaft sweeps 1.432° every millisecond.
Rim speed and centripetal load at ω = 25 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.25 m/s · 0.9 km/h | 6.25 m/s² · 0.6373 g |
| 5 cm | 10 cm | 1.25 m/s · 4.5 km/h | 31.25 m/s² · 3.187 g |
| 10 cm | 20 cm | 2.5 m/s · 9 km/h | 62.5 m/s² · 6.373 g |
| 25 cm | 50 cm | 6.25 m/s · 22.5 km/h | 156.3 m/s² · 15.93 g |
| 50 cm | 1 m | 12.5 m/s · 45 km/h | 312.5 m/s² · 31.87 g |
| 1 m | 2 m | 25 m/s · 90 km/h | 625 m/s² · 63.73 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 238.73 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 3.979 Hz | Below typical VFD range — use a gearbox |
| 4 | 7.958 Hz | Reachable with a VFD |
| 6 | 11.94 Hz | Reachable with a VFD |
| 8 | 15.92 Hz | Reachable with a VFD |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 79.58 RPM · 8.333 rad/s | ×3 |
| 5:1 | 47.75 RPM · 5 rad/s | ×5 |
| 10:1 | 23.87 RPM · 2.5 rad/s | ×10 |
| 30:1 | 7.958 RPM · 0.8333 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 0.3125 J |
| 0.01 kg·m² (bench-grinder wheel) | 3.125 J |
| 0.1 kg·m² (car flywheel) | 31.25 J |
| 1 kg·m² (industrial flywheel) | 312.5 J |
Multiples of this speed
- 0.5× = 12.5 rad/s119.3662 RPM
- 2× = 50 rad/s477.4648 RPM
- 5× = 125 rad/s1,193.6621 RPM
- 10× = 250 rad/s2,387.3241 RPM

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 25 radians per second to RPM, multiply 25 by 30 and divide by π: 25 × (30 / π) = 238.7324 RPM (approx. 238.73 RPM).
25 rad/s equals 3.9789 Hz (revolutions per second), calculated by dividing 25 by 2π (approx. 6.283185).
To convert 238.73 RPM back to radians per second, multiply by π and divide by 30: 238.73 × (π / 30) ≈ 25 rad/s.
At 25 rad/s, one full 360° revolution takes 0.2513 seconds (251.33 ms).
25 rad/s is 238.7324 RPM, which a 4-pole induction motor reaches synchronously at 7.9577 Hz (f = RPM × poles / 120). Under load it runs roughly 2–4% slower.
Tangential speed is v = ω·r = 25 rad/s × 0.1 m = 2.5 m/s (9 km/h), with a centripetal acceleration of ω²·r = 62.5 m/s².