RPM to Radians Per SecondRPM to rad/s

100 Rad/s to RPM Converter

Instant conversion for 100 rad/s to RPM (954.9297 RPM). Analytical 30/π formula, rotational frequency in Hz, and full kinematics.

m
Result954.92966 RPM
RPM
954.92966
Degrees per Second (°/s)
5,729.578 °/s
Hertz (Hz)
15.915494 Hz
Revolutions per Second (RPS)
15.915494 rev/s
Revolutions per Hour (RPH)
57,295.78 rev/hr
Revolutions per Day
1,375,098.7 rev/day
Radians per Minute (rad/min)
6,000 rad/min
Milliradians per Second (mrad/s)
100,000 mrad/s
Period (seconds per rev)
0.062832 s/rev
Exact Formula
100 × 30/π = 954.92966 RPM
Nearest Real-World Example
Car engine — idle (800 RPM)
Precision Drift Meter (Exact π/30 vs. 0.10472 Rounded)Zero Drift Here

Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:

Exact Value (π/30):100.000000 rad/s
Rounded (0.10472):100.000234 rad/s
Angular Error / Hour:48.23° / hr

Worked Conversion: 100 Rad/s to RPM

To convert radians per second (rad/s) to revolutions per minute (RPM), multiply by 60 seconds per minute and divide by 2π radians per revolution. The analytical reciprocal simplifies to 30/π (≈ 9.549297).

RPM = 100 × (30 / π) = 954.9297 RPM

Exact fraction: (100 × 30)/π RPM · Reciprocal: 954.93 RPM × (π/30) = 100 rad/s

Rotational Speed
954.9297 RPM
Frequency
15.9155 Hz
Degrees / Second
5,729.58 °/s
Period per Rev
0.0628 s
Engineering Context: At 100 rad/s (high-speed motor and turbine regime), 100 rad/s produces 954.93 RPM (15.915 Hz), a frequent speed for centrifugal blowers, dynamometer runs, and direct-drive EV powertrains.

Forward Conversion: 1,000 RPM to Rad/s

Need to convert from revolutions per minute back to radians per second? Explore the standard forward converter with exact π/30 precision.

Open 1,000 RPM Converter →

In-Depth Engineering Guides & References

Rad/s to RPM Converter & Formula (RPM = ω × 30/π)— The reverse factor, worked examples and a rad/s to RPM table.
How to Convert rad/s to RPM, Step by Step— Unit cancellation and exam-style worked problems.
5.36 Rad/s to RPM: Physics Homework Solution— Serway & Halliday kinematics proof and analytical derivation.
RPM to Radians Per Second Formula & Calculus Proof— Dimensional cancellation, π/30 derivation, and IEEE 754 precision.
Angular Velocity Guide & Rotational Kinematics— SI standards, tangential velocity (v = ω·r), and centripetal acceleration.
Complete Conversion Index— Browse all forward and reverse conversion tables.

100 rad/s: exact form, real-world scale & engineering tables

Exact answer in terms of π

100 rad/s = 3,000/π RPM ≈ 954.929659 RPM

Keep π symbolic through multi-step problems and only round at the end.

Rounding check

Using the rounded factor 9.55 gives 955 RPM instead of the exact 954.9297 RPM — an error of 0.07034 RPM.

What this speed looks like in practice

At 954.9297 RPM a shaft turns about 1.27× as fast as a car engine at idle. A washing machine spin cycle turns about 1.26× faster.

Revolutions over time

That is 57,296 revolutions per hour and 1,375,100 per day. A quarter turn (90°) takes 15.7 ms, and the shaft sweeps 5.73° every millisecond.

Rim speed and centripetal load at ω = 100 rad/s

Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.

RadiusDiameterRim speedCentripetal acceleration
1 cm2 cm1 m/s · 3.6 km/h100 m/s² · 10.2 g
5 cm10 cm5 m/s · 18 km/h500 m/s² · 50.99 g
10 cm20 cm10 m/s · 36 km/h1,000 m/s² · 102 g
25 cm50 cm25 m/s · 90 km/h2,500 m/s² · 254.9 g
50 cm1 m50 m/s · 180 km/h5,000 m/s² · 509.9 g
1 m2 m100 m/s · 360 km/h10,000 m/s² · 1,020 g

Driving this speed with an AC motor

Supply frequency an induction motor would need for a synchronous speed of 954.93 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.

PolesSupply frequencyPractical note
215.92 HzReachable with a VFD
431.83 HzReachable with a VFD
647.75 HzReachable with a VFD
863.66 HzReachable with a VFD

Through a reduction gearbox

Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.

RatioOutput speedTorque ×
3:1318.3 RPM · 33.33 rad/s×3
5:1191 RPM · 20 rad/s×5
10:195.49 RPM · 10 rad/s×10
30:131.83 RPM · 3.333 rad/s×30

Stored rotational energy

Kinetic energy E = ½·I·ω² for a range of moments of inertia.

Moment of inertiaEnergy
0.001 kg·m² (small fan impeller)5 J
0.01 kg·m² (bench-grinder wheel)50 J
0.1 kg·m² (car flywheel)500 J
1 kg·m² (industrial flywheel)5 kJ

Multiples of this speed

Rizwan Malik headshot

Rizwan Malik

Founder & Editor

  • Formulas checked against the BIPM SI Brochure
  • Unit definitions per NIST SP 811

Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.

Frequently asked questions