RPM to Radians Per SecondRPM to rad/s

360 RPM to Radians Per Second Converter

Instant conversion for 360 RPM to rad/s (37.699112 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.

m
Result37.699112 rad/s
Radians per Second (rad/s)
37.699112
Degrees per Second (°/s)
2,160 °/s
Hertz (Hz)
6 Hz
Revolutions per Second (RPS)
6 rev/s
Revolutions per Hour (RPH)
21,600 rev/hr
Revolutions per Day
518,400 rev/day
Radians per Minute (rad/min)
2,261.9467 rad/min
Milliradians per Second (mrad/s)
37,699.112 mrad/s
Period (seconds per rev)
0.166667 s/rev
Exact Formula
360 × π/30 = 37.699112 rad/s
Nearest Real-World Example
Ceiling fan — high (200 RPM)
Precision Drift Meter (Exact π/30 vs. 0.10472 Rounded)Zero Drift Here

Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:

Exact Value (π/30):37.699112 rad/s
Rounded (0.10472):37.699200 rad/s
Angular Error / Hour:18.18° / hr

Worked Conversion: 360 RPM to Radians Per Second

To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.

rad/s = 360 × (π / 30) = 37.699112 rad/s

Exact fraction: 360π/30 rad/s · Reciprocal: 37.699 rad/s × (30/π) = 360 RPM

Angular Velocity
37.699112 rad/s
Frequency
6 Hz
Degrees / Second
2,160 °/s
Period per Rev
0.1667 s
Engineering Context: The high hundreds of RPM is where kitchen appliances and idling engines sit, and where angular velocity starts to dominate the mechanical design.

Reverse Conversion: 37.699 rad/s to RPM

Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.

Browse Reverse Conversions →

In-Depth Engineering Guides & References

5.36 Rad/s to RPM: College Physics Homework Benchmark Solution— Serway & Halliday kinematics proof and analytical derivation.
RPM to Radians Per Second Formula & Calculus Proof— Dimensional cancellation, π/30 derivation, and IEEE 754 precision.
Angular Velocity Guide & Rotational Kinematics— SI standards, tangential velocity (v = ω·r), and centripetal acceleration.
Complete Conversion Index— Browse pre-calculated conversion speeds from 1 to 20,000 RPM.

360 RPM: exact form, real-world scale & engineering tables

Exact answer in terms of π

360 RPM = 12π rad/s ≈ 37.699112 rad/s

Reduced fraction — keep this form through multi-step problems and only round at the end.

Rounding check

Using the rounded factor 0.1047 gives 37.692 rad/s instead of the exact 37.6991 rad/s — an error of 0.007112 rad/s.

What this speed looks like in practice

At 360 RPM a shaft turns about 1.8× as fast as a ceiling fan on high. A car engine at idle turns about 2.08× faster.

Revolutions over time

That is 21,600 revolutions per hour and 518,400 per day. A quarter turn (90°) takes 41.7 ms, and the shaft sweeps 2.16° every millisecond.

Rim speed and centripetal load at ω = 37.6991 rad/s

Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.

RadiusDiameterRim speedCentripetal acceleration
1 cm2 cm0.377 m/s · 1.357 km/h14.21 m/s² · 1.449 g
5 cm10 cm1.885 m/s · 6.786 km/h71.06 m/s² · 7.246 g
10 cm20 cm3.77 m/s · 13.57 km/h142.1 m/s² · 14.49 g
25 cm50 cm9.425 m/s · 33.93 km/h355.3 m/s² · 36.23 g
50 cm1 m18.85 m/s · 67.86 km/h710.6 m/s² · 72.46 g
1 m2 m37.7 m/s · 135.7 km/h1,421 m/s² · 144.9 g

Driving this speed with an AC motor

Supply frequency an induction motor would need for a synchronous speed of 360 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.

PolesSupply frequencyPractical note
26 HzReachable with a VFD
412 HzReachable with a VFD
618 HzReachable with a VFD
824 HzReachable with a VFD

Through a reduction gearbox

Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.

RatioOutput speedTorque ×
3:1120 RPM · 12.57 rad/s×3
5:172 RPM · 7.54 rad/s×5
10:136 RPM · 3.77 rad/s×10
30:112 RPM · 1.257 rad/s×30

Stored rotational energy

Kinetic energy E = ½·I·ω² for a range of moments of inertia.

Moment of inertiaEnergy
0.001 kg·m² (small fan impeller)0.7106 J
0.01 kg·m² (bench-grinder wheel)7.106 J
0.1 kg·m² (car flywheel)71.06 J
1 kg·m² (industrial flywheel)710.6 J

Multiples of this speed

Rizwan Malik headshot

Rizwan Malik

Founder & Editor

  • Formulas checked against the BIPM SI Brochure
  • Unit definitions per NIST SP 811

Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.

Frequently asked questions