4,000 RPM to Radians Per Second Converter
Instant conversion for 4,000 RPM to rad/s (418.879020 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 418.87902
- Degrees per Second (°/s)
- 24,000 °/s
- Hertz (Hz)
- 66.666667 Hz
- Revolutions per Second (RPS)
- 66.666667 rev/s
- Revolutions per Hour (RPH)
- 240,000 rev/hr
- Revolutions per Day
- 5,760,000 rev/day
- Radians per Minute (rad/min)
- 25,132.741 rad/min
- Milliradians per Second (mrad/s)
- 418,879.02 mrad/s
- Period (seconds per rev)
- 0.015 s/rev
- Exact Formula
- 4000 × π/30 = 418.87902 rad/s
- Nearest Real-World Example
- Hard drive (5,400 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 4,000 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 4000 × (π / 30) = 418.879020 rad/s
Exact fraction: 4000π/30 rad/s · Reciprocal: 418.88 rad/s × (30/π) = 4,000 RPM
Reverse Conversion: 418.88 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
4,000 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
4,000 RPM = 400π/3 rad/s ≈ 418.87902 rad/s
Reduced fraction — keep this form through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 418.8 rad/s instead of the exact 418.879 rad/s — an error of 0.07902 rad/s.
What this speed looks like in practice
At 4,000 RPM a shaft turns about 2.22× as fast as a 4-pole motor on a 60 Hz grid. A laptop hard drive (5,400 RPM) turns about 1.35× faster.
Revolutions over time
That is 240,000 revolutions per hour and 5,760,000 per day. A quarter turn (90°) takes 3.75 ms, and the shaft sweeps 24° every millisecond.
Rim speed and centripetal load at ω = 418.879 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 4.189 m/s · 15.08 km/h | 1,755 m/s² · 178.9 g |
| 5 cm | 10 cm | 20.94 m/s · 75.4 km/h | 8,773 m/s² · 894.6 g |
| 10 cm | 20 cm | 41.89 m/s · 150.8 km/h | 17,550 m/s² · 1,789 g |
| 25 cm | 50 cm | 104.7 m/s · 377 km/h | 43,860 m/s² · 4,473 g |
| 50 cm | 1 m | 209.4 m/s · 754 km/h | 87,730 m/s² · 8,946 g |
| 1 m | 2 m | 418.9 m/s · 1,508 km/h | 175,500 m/s² · 17,890 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 4,000 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 66.67 Hz | Reachable with a VFD |
| 4 | 133.3 Hz | Above typical VFD range |
| 6 | 200 Hz | Above typical VFD range |
| 8 | 266.7 Hz | Above typical VFD range |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 1,333 RPM · 139.6 rad/s | ×3 |
| 5:1 | 800 RPM · 83.78 rad/s | ×5 |
| 10:1 | 400 RPM · 41.89 rad/s | ×10 |
| 30:1 | 133.3 RPM · 13.96 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 87.73 J |
| 0.01 kg·m² (bench-grinder wheel) | 877.3 J |
| 0.1 kg·m² (car flywheel) | 8.773 kJ |
| 1 kg·m² (industrial flywheel) | 87.73 kJ |
Multiples of this speed
- 0.5× = 2,000 RPM209.4395 rad/s
- 2× = 8,000 RPM837.758 rad/s
- 5× = 20,000 RPM2,094.3951 rad/s
- 10× = 40,000 RPM4,188.7902 rad/s

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 4,000 RPM to radians per second, multiply 4000 by π and divide by 30: 4000 × (π / 30) = 418.879020 rad/s (approx. 418.88 rad/s).
4,000 RPM equals 66.6667 Hz (revolutions per second), calculated by dividing 4000 by 60 seconds.
To convert 418.88 rad/s back to RPM, multiply by 30 and divide by π: 418.88 × (30 / π) ≈ 4,000 RPM.
At 4,000 RPM, one full 360° revolution takes 0.015 seconds (15.00 ms).
A 4-pole induction motor has a synchronous speed of 4,000 RPM at 133.3333 Hz (f = RPM × poles / 120 = 4000 × 4 / 120). That is beyond a standard motor and drive, so this speed calls for a high-speed spindle motor or a step-up transmission.
Tangential speed is v = ω·r = 418.879020 rad/s × 0.1 m = 41.8879 m/s (150.7964 km/h). The centripetal acceleration at the rim is ω²·r = 17545.9634 m/s².