18,000 RPM to Radians Per Second Converter
Instant conversion for 18,000 RPM to rad/s (1884.955592 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 1884.9556
- Degrees per Second (°/s)
- 108,000 °/s
- Hertz (Hz)
- 300 Hz
- Revolutions per Second (RPS)
- 300 rev/s
- Revolutions per Hour (RPH)
- 1,080,000 rev/hr
- Revolutions per Day
- 25,920,000 rev/day
- Radians per Minute (rad/min)
- 113,097.34 rad/min
- Milliradians per Second (mrad/s)
- 1,884,955.6 mrad/s
- Period (seconds per rev)
- 0.003333 s/rev
- Exact Formula
- 18000 × π/30 = 1884.9556 rad/s
- Nearest Real-World Example
- Jet engine — cruise (15,000 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 18,000 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 18000 × (π / 30) = 1884.955592 rad/s
Exact fraction: 18000π/30 rad/s · Reciprocal: 1885 rad/s × (30/π) = 18,000 RPM
Reverse Conversion: 1885 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
18,000 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
18,000 RPM = 600π rad/s ≈ 1,884.955592 rad/s
Reduced fraction — keep this form through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 1,884.6 rad/s instead of the exact 1,884.9556 rad/s — an error of 0.3556 rad/s.
What this speed looks like in practice
At 18,000 RPM a shaft turns about 1.64× as fast as a 115 mm angle grinder. A rotary multi-tool at full speed turns about 1.94× faster.
Revolutions over time
That is 1,080,000 revolutions per hour and 25,920,000 per day. A quarter turn (90°) takes 833 µs, and the shaft sweeps 108° every millisecond.
Rim speed and centripetal load at ω = 1,884.9556 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 18.85 m/s · 67.86 km/h | 35,530 m/s² · 3,623 g |
| 5 cm | 10 cm | 94.25 m/s · 339.3 km/h | 177,700 m/s² · 18,120 g |
| 10 cm | 20 cm | 188.5 m/s · 678.6 km/h | 355,300 m/s² · 36,230 g |
| 25 cm | 50 cm | 471.2 m/s · 1,696 km/h | 888,300 m/s² · 90,580 g |
| 50 cm | 1 m | 942.5 m/s · 3,393 km/h | 1,777,000 m/s² · 181,200 g |
| 1 m | 2 m | 1,885 m/s · 6,786 km/h | 3,553,000 m/s² · 362,300 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 18,000 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 300 Hz | Above typical VFD range |
| 4 | 600 Hz | Above typical VFD range |
| 6 | 900 Hz | Above typical VFD range |
| 8 | 1,200 Hz | Above typical VFD range |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 6,000 RPM · 628.3 rad/s | ×3 |
| 5:1 | 3,600 RPM · 377 rad/s | ×5 |
| 10:1 | 1,800 RPM · 188.5 rad/s | ×10 |
| 30:1 | 600 RPM · 62.83 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 1.777 kJ |
| 0.01 kg·m² (bench-grinder wheel) | 17.77 kJ |
| 0.1 kg·m² (car flywheel) | 177.7 kJ |
| 1 kg·m² (industrial flywheel) | 1.777 MJ |
Multiples of this speed
- 0.5× = 9,000 RPM942.4778 rad/s
- 2× = 36,000 RPM3,769.9112 rad/s
- 5× = 90,000 RPM9,424.778 rad/s
- 10× = 180,000 RPM18,849.5559 rad/s

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 18,000 RPM to radians per second, multiply 18000 by π and divide by 30: 18000 × (π / 30) = 1884.955592 rad/s (approx. 1885 rad/s).
18,000 RPM equals 300.0000 Hz (revolutions per second), calculated by dividing 18000 by 60 seconds.
To convert 1885 rad/s back to RPM, multiply by 30 and divide by π: 1885 × (30 / π) ≈ 18,000 RPM.
At 18,000 RPM, one full 360° revolution takes 0.0033 seconds (3.33 ms).
A 4-pole induction motor has a synchronous speed of 18,000 RPM at 600 Hz (f = RPM × poles / 120 = 18000 × 4 / 120). That is beyond a standard motor and drive, so this speed calls for a high-speed spindle motor or a step-up transmission.
Tangential speed is v = ω·r = 1884.955592 rad/s × 0.1 m = 188.4956 m/s (678.584 km/h). The centripetal acceleration at the rim is ω²·r = 355305.7584 m/s².