800 RPM to Radians Per Second Converter
Instant conversion for 800 RPM to rad/s (83.775804 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 83.775804
- Degrees per Second (°/s)
- 4,800 °/s
- Hertz (Hz)
- 13.333333 Hz
- Revolutions per Second (RPS)
- 13.333333 rev/s
- Revolutions per Hour (RPH)
- 48,000 rev/hr
- Revolutions per Day
- 1,152,000 rev/day
- Radians per Minute (rad/min)
- 5,026.5482 rad/min
- Milliradians per Second (mrad/s)
- 83,775.804 mrad/s
- Period (seconds per rev)
- 0.075 s/rev
- Exact Formula
- 800 × π/30 = 83.775804 rad/s
- Nearest Real-World Example
- Car engine — idle (800 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 800 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 800 × (π / 30) = 83.775804 rad/s
Exact fraction: 800π/30 rad/s · Reciprocal: 83.776 rad/s × (30/π) = 800 RPM
Reverse Conversion: 83.776 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
800 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
800 RPM = 80π/3 rad/s ≈ 83.775804 rad/s
Reduced fraction — keep this form through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 83.76 rad/s instead of the exact 83.7758 rad/s — an error of 0.0158 rad/s.
What this speed looks like in practice
At 800 RPM a shaft turns about 1.07× as fast as a car engine at idle. A washing machine spin cycle turns about 1.5× faster.
Revolutions over time
That is 48,000 revolutions per hour and 1,152,000 per day. A quarter turn (90°) takes 18.8 ms, and the shaft sweeps 4.8° every millisecond.
Rim speed and centripetal load at ω = 83.7758 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.8378 m/s · 3.016 km/h | 70.18 m/s² · 7.157 g |
| 5 cm | 10 cm | 4.189 m/s · 15.08 km/h | 350.9 m/s² · 35.78 g |
| 10 cm | 20 cm | 8.378 m/s · 30.16 km/h | 701.8 m/s² · 71.57 g |
| 25 cm | 50 cm | 20.94 m/s · 75.4 km/h | 1,755 m/s² · 178.9 g |
| 50 cm | 1 m | 41.89 m/s · 150.8 km/h | 3,509 m/s² · 357.8 g |
| 1 m | 2 m | 83.78 m/s · 301.6 km/h | 7,018 m/s² · 715.7 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 800 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 13.33 Hz | Reachable with a VFD |
| 4 | 26.67 Hz | Reachable with a VFD |
| 6 | 40 Hz | Reachable with a VFD |
| 8 | 53.33 Hz | Reachable with a VFD |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 266.7 RPM · 27.93 rad/s | ×3 |
| 5:1 | 160 RPM · 16.76 rad/s | ×5 |
| 10:1 | 80 RPM · 8.378 rad/s | ×10 |
| 30:1 | 26.67 RPM · 2.793 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 3.509 J |
| 0.01 kg·m² (bench-grinder wheel) | 35.09 J |
| 0.1 kg·m² (car flywheel) | 350.9 J |
| 1 kg·m² (industrial flywheel) | 3.509 kJ |
Multiples of this speed
- 0.5× = 400 RPM41.8879 rad/s
- 2× = 1,600 RPM167.5516 rad/s
- 5× = 4,000 RPM418.879 rad/s
- 10× = 8,000 RPM837.758 rad/s

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 800 RPM to radians per second, multiply 800 by π and divide by 30: 800 × (π / 30) = 83.775804 rad/s (approx. 83.776 rad/s).
800 RPM equals 13.3333 Hz (revolutions per second), calculated by dividing 800 by 60 seconds.
To convert 83.776 rad/s back to RPM, multiply by 30 and divide by π: 83.776 × (30 / π) ≈ 800 RPM.
At 800 RPM, one full 360° revolution takes 0.075 seconds (75.00 ms).
A 4-pole induction motor has a synchronous speed of 800 RPM at 26.6667 Hz (f = RPM × poles / 120 = 800 × 4 / 120). Under load it runs roughly 2–4% below synchronous speed, so a VFD is normally set slightly higher.
Tangential speed is v = ω·r = 83.775804 rad/s × 0.1 m = 8.3776 m/s (30.1593 km/h). The centripetal acceleration at the rim is ω²·r = 701.8385 m/s².