750 RPM to Radians Per Second Converter
Instant conversion for 750 RPM to rad/s (78.539816 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 78.539816
- Degrees per Second (°/s)
- 4,500 °/s
- Hertz (Hz)
- 12.5 Hz
- Revolutions per Second (RPS)
- 12.5 rev/s
- Revolutions per Hour (RPH)
- 45,000 rev/hr
- Revolutions per Day
- 1,080,000 rev/day
- Radians per Minute (rad/min)
- 4,712.389 rad/min
- Milliradians per Second (mrad/s)
- 78,539.816 mrad/s
- Period (seconds per rev)
- 0.08 s/rev
- Exact Formula
- 750 × π/30 = 78.539816 rad/s
- Nearest Real-World Example
- Car engine — idle (800 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 750 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 750 × (π / 30) = 78.539816 rad/s
Exact fraction: 750π/30 rad/s · Reciprocal: 78.54 rad/s × (30/π) = 750 RPM
Reverse Conversion: 78.54 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
750 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
750 RPM = 25π rad/s ≈ 78.539816 rad/s
Reduced fraction — keep this form through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 78.525 rad/s instead of the exact 78.5398 rad/s — an error of 0.01482 rad/s.
What this speed looks like in practice
That is the typical speed of a car engine at idle. At 750 RPM a shaft turns about 3.75× as fast as a ceiling fan on high. A washing machine spin cycle turns about 1.6× faster.
Revolutions over time
That is 45,000 revolutions per hour and 1,080,000 per day. A quarter turn (90°) takes 20 ms, and the shaft sweeps 4.5° every millisecond.
Rim speed and centripetal load at ω = 78.5398 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.7854 m/s · 2.827 km/h | 61.69 m/s² · 6.29 g |
| 5 cm | 10 cm | 3.927 m/s · 14.14 km/h | 308.4 m/s² · 31.45 g |
| 10 cm | 20 cm | 7.854 m/s · 28.27 km/h | 616.9 m/s² · 62.9 g |
| 25 cm | 50 cm | 19.63 m/s · 70.69 km/h | 1,542 m/s² · 157.3 g |
| 50 cm | 1 m | 39.27 m/s · 141.4 km/h | 3,084 m/s² · 314.5 g |
| 1 m | 2 m | 78.54 m/s · 282.7 km/h | 6,169 m/s² · 629 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 750 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 12.5 Hz | Reachable with a VFD |
| 4 | 25 Hz | Reachable with a VFD |
| 6 | 37.5 Hz | Reachable with a VFD |
| 8 | 50 Hz | Standard speed on a 50 Hz grid |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 250 RPM · 26.18 rad/s | ×3 |
| 5:1 | 150 RPM · 15.71 rad/s | ×5 |
| 10:1 | 75 RPM · 7.854 rad/s | ×10 |
| 30:1 | 25 RPM · 2.618 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 3.084 J |
| 0.01 kg·m² (bench-grinder wheel) | 30.84 J |
| 0.1 kg·m² (car flywheel) | 308.4 J |
| 1 kg·m² (industrial flywheel) | 3.084 kJ |
Multiples of this speed
- 0.5× = 375 RPM39.2699 rad/s
- 2× = 1,500 RPM157.0796 rad/s
- 5× = 3,750 RPM392.6991 rad/s
- 10× = 7,500 RPM785.3982 rad/s

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 750 RPM to radians per second, multiply 750 by π and divide by 30: 750 × (π / 30) = 78.539816 rad/s (approx. 78.54 rad/s).
750 RPM equals 12.5000 Hz (revolutions per second), calculated by dividing 750 by 60 seconds.
To convert 78.54 rad/s back to RPM, multiply by 30 and divide by π: 78.54 × (30 / π) ≈ 750 RPM.
At 750 RPM, one full 360° revolution takes 0.08 seconds (80.00 ms).
A 4-pole induction motor has a synchronous speed of 750 RPM at 25 Hz (f = RPM × poles / 120 = 750 × 4 / 120). Under load it runs roughly 2–4% below synchronous speed, so a VFD is normally set slightly higher.
Tangential speed is v = ω·r = 78.539816 rad/s × 0.1 m = 7.854 m/s (28.2743 km/h). The centripetal acceleration at the rim is ω²·r = 616.8503 m/s².