RPM to Radians Per SecondRPM to rad/s

900 RPM to Radians Per Second Converter

Instant conversion for 900 RPM to rad/s (94.247780 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.

m
Result94.247780 rad/s
Radians per Second (rad/s)
94.24778
Degrees per Second (°/s)
5,400 °/s
Hertz (Hz)
15 Hz
Revolutions per Second (RPS)
15 rev/s
Revolutions per Hour (RPH)
54,000 rev/hr
Revolutions per Day
1,296,000 rev/day
Radians per Minute (rad/min)
5,654.8668 rad/min
Milliradians per Second (mrad/s)
94,247.78 mrad/s
Period (seconds per rev)
0.066667 s/rev
Exact Formula
900 × π/30 = 94.24778 rad/s
Nearest Real-World Example
Car engine — idle (800 RPM)
Precision Drift Meter (Exact π/30 vs. 0.10472 Rounded)Zero Drift Here

Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:

Exact Value (π/30):94.247780 rad/s
Rounded (0.10472):94.248000 rad/s
Angular Error / Hour:45.46° / hr

Worked Conversion: 900 RPM to Radians Per Second

To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.

rad/s = 900 × (π / 30) = 94.247780 rad/s

Exact fraction: 900π/30 rad/s · Reciprocal: 94.248 rad/s × (30/π) = 900 RPM

Angular Velocity
94.247780 rad/s
Frequency
15 Hz
Degrees / Second
5,400 °/s
Period per Rev
0.0667 s
Engineering Context: The high hundreds of RPM is where kitchen appliances and idling engines sit, and where angular velocity starts to dominate the mechanical design.

Reverse Conversion: 94.248 rad/s to RPM

Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.

Browse Reverse Conversions →

In-Depth Engineering Guides & References

5.36 Rad/s to RPM: College Physics Homework Benchmark Solution— Serway & Halliday kinematics proof and analytical derivation.
RPM to Radians Per Second Formula & Calculus Proof— Dimensional cancellation, π/30 derivation, and IEEE 754 precision.
Standard Motor RPMs: Synchronous Speeds & Slip— 50 Hz vs 60 Hz grids, pole counts, and synchronous motor speeds.
Angular Velocity Guide & Rotational Kinematics— SI standards, tangential velocity (v = ω·r), and centripetal acceleration.
Complete Conversion Index— Browse pre-calculated conversion speeds from 1 to 20,000 RPM.

900 RPM: exact form, real-world scale & engineering tables

Exact answer in terms of π

900 RPM = 30π rad/s ≈ 94.24778 rad/s

Reduced fraction — keep this form through multi-step problems and only round at the end.

Rounding check

Using the rounded factor 0.1047 gives 94.23 rad/s instead of the exact 94.2478 rad/s — an error of 0.01778 rad/s.

What this speed looks like in practice

At 900 RPM a shaft turns about 1.2× as fast as a car engine at idle. A washing machine spin cycle turns about 1.33× faster.

Revolutions over time

That is 54,000 revolutions per hour and 1,296,000 per day. A quarter turn (90°) takes 16.7 ms, and the shaft sweeps 5.4° every millisecond.

Rim speed and centripetal load at ω = 94.2478 rad/s

Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.

RadiusDiameterRim speedCentripetal acceleration
1 cm2 cm0.9425 m/s · 3.393 km/h88.83 m/s² · 9.058 g
5 cm10 cm4.712 m/s · 16.96 km/h444.1 m/s² · 45.29 g
10 cm20 cm9.425 m/s · 33.93 km/h888.3 m/s² · 90.58 g
25 cm50 cm23.56 m/s · 84.82 km/h2,221 m/s² · 226.4 g
50 cm1 m47.12 m/s · 169.6 km/h4,441 m/s² · 452.9 g
1 m2 m94.25 m/s · 339.3 km/h8,883 m/s² · 905.8 g

Driving this speed with an AC motor

Supply frequency an induction motor would need for a synchronous speed of 900 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.

PolesSupply frequencyPractical note
215 HzReachable with a VFD
430 HzReachable with a VFD
645 HzReachable with a VFD
860 HzStandard speed on a 60 Hz grid

Through a reduction gearbox

Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.

RatioOutput speedTorque ×
3:1300 RPM · 31.42 rad/s×3
5:1180 RPM · 18.85 rad/s×5
10:190 RPM · 9.425 rad/s×10
30:130 RPM · 3.142 rad/s×30

Stored rotational energy

Kinetic energy E = ½·I·ω² for a range of moments of inertia.

Moment of inertiaEnergy
0.001 kg·m² (small fan impeller)4.441 J
0.01 kg·m² (bench-grinder wheel)44.41 J
0.1 kg·m² (car flywheel)444.1 J
1 kg·m² (industrial flywheel)4.441 kJ

Multiples of this speed

Rizwan Malik headshot

Rizwan Malik

Founder & Editor

  • Formulas checked against the BIPM SI Brochure
  • Unit definitions per NIST SP 811

Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.

Frequently asked questions