RPM to Radians Per SecondRPM to rad/s

700 RPM to Radians Per Second Converter

Instant conversion for 700 RPM to rad/s (73.303829 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.

m
Result73.303829 rad/s
Radians per Second (rad/s)
73.303829
Degrees per Second (°/s)
4,200 °/s
Hertz (Hz)
11.666667 Hz
Revolutions per Second (RPS)
11.666667 rev/s
Revolutions per Hour (RPH)
42,000 rev/hr
Revolutions per Day
1,008,000 rev/day
Radians per Minute (rad/min)
4,398.2297 rad/min
Milliradians per Second (mrad/s)
73,303.829 mrad/s
Period (seconds per rev)
0.085714 s/rev
Exact Formula
700 × π/30 = 73.303829 rad/s
Nearest Real-World Example
Car engine — idle (800 RPM)
Precision Drift Meter (Exact π/30 vs. 0.10472 Rounded)Zero Drift Here

Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:

Exact Value (π/30):73.303829 rad/s
Rounded (0.10472):73.304000 rad/s
Angular Error / Hour:35.36° / hr

Worked Conversion: 700 RPM to Radians Per Second

To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.

rad/s = 700 × (π / 30) = 73.303829 rad/s

Exact fraction: 700π/30 rad/s · Reciprocal: 73.304 rad/s × (30/π) = 700 RPM

Angular Velocity
73.303829 rad/s
Frequency
11.6667 Hz
Degrees / Second
4,200 °/s
Period per Rev
0.0857 s
Engineering Context: The high hundreds of RPM is where kitchen appliances and idling engines sit, and where angular velocity starts to dominate the mechanical design.

Reverse Conversion: 73.304 rad/s to RPM

Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.

Browse Reverse Conversions →

In-Depth Engineering Guides & References

5.36 Rad/s to RPM: College Physics Homework Benchmark Solution— Serway & Halliday kinematics proof and analytical derivation.
RPM to Radians Per Second Formula & Calculus Proof— Dimensional cancellation, π/30 derivation, and IEEE 754 precision.
Angular Velocity Guide & Rotational Kinematics— SI standards, tangential velocity (v = ω·r), and centripetal acceleration.
Complete Conversion Index— Browse pre-calculated conversion speeds from 1 to 20,000 RPM.

700 RPM: exact form, real-world scale & engineering tables

Exact answer in terms of π

700 RPM = 70π/3 rad/s ≈ 73.303829 rad/s

Reduced fraction — keep this form through multi-step problems and only round at the end.

Rounding check

Using the rounded factor 0.1047 gives 73.29 rad/s instead of the exact 73.3038 rad/s — an error of 0.01383 rad/s.

What this speed looks like in practice

At 700 RPM a shaft turns about 3.5× as fast as a ceiling fan on high. A car engine at idle turns about 1.07× faster.

Revolutions over time

That is 42,000 revolutions per hour and 1,008,000 per day. A quarter turn (90°) takes 21.4 ms, and the shaft sweeps 4.2° every millisecond.

Rim speed and centripetal load at ω = 73.3038 rad/s

Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.

RadiusDiameterRim speedCentripetal acceleration
1 cm2 cm0.733 m/s · 2.639 km/h53.73 m/s² · 5.479 g
5 cm10 cm3.665 m/s · 13.19 km/h268.7 m/s² · 27.4 g
10 cm20 cm7.33 m/s · 26.39 km/h537.3 m/s² · 54.79 g
25 cm50 cm18.33 m/s · 65.97 km/h1,343 m/s² · 137 g
50 cm1 m36.65 m/s · 131.9 km/h2,687 m/s² · 274 g
1 m2 m73.3 m/s · 263.9 km/h5,373 m/s² · 547.9 g

Driving this speed with an AC motor

Supply frequency an induction motor would need for a synchronous speed of 700 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.

PolesSupply frequencyPractical note
211.67 HzReachable with a VFD
423.33 HzReachable with a VFD
635 HzReachable with a VFD
846.67 HzReachable with a VFD

Through a reduction gearbox

Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.

RatioOutput speedTorque ×
3:1233.3 RPM · 24.43 rad/s×3
5:1140 RPM · 14.66 rad/s×5
10:170 RPM · 7.33 rad/s×10
30:123.33 RPM · 2.443 rad/s×30

Stored rotational energy

Kinetic energy E = ½·I·ω² for a range of moments of inertia.

Moment of inertiaEnergy
0.001 kg·m² (small fan impeller)2.687 J
0.01 kg·m² (bench-grinder wheel)26.87 J
0.1 kg·m² (car flywheel)268.7 J
1 kg·m² (industrial flywheel)2.687 kJ

Multiples of this speed

Rizwan Malik headshot

Rizwan Malik

Founder & Editor

  • Formulas checked against the BIPM SI Brochure
  • Unit definitions per NIST SP 811

Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.

Frequently asked questions