850 RPM to Radians Per Second Converter
Instant conversion for 850 RPM to rad/s (89.011792 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 89.011792
- Degrees per Second (°/s)
- 5,100 °/s
- Hertz (Hz)
- 14.166667 Hz
- Revolutions per Second (RPS)
- 14.166667 rev/s
- Revolutions per Hour (RPH)
- 51,000 rev/hr
- Revolutions per Day
- 1,224,000 rev/day
- Radians per Minute (rad/min)
- 5,340.7075 rad/min
- Milliradians per Second (mrad/s)
- 89,011.792 mrad/s
- Period (seconds per rev)
- 0.070588 s/rev
- Exact Formula
- 850 × π/30 = 89.011792 rad/s
- Nearest Real-World Example
- Car engine — idle (800 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 850 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 850 × (π / 30) = 89.011792 rad/s
Exact fraction: 850π/30 rad/s · Reciprocal: 89.012 rad/s × (30/π) = 850 RPM
Reverse Conversion: 89.012 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
850 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
850 RPM = 85π/3 rad/s ≈ 89.011792 rad/s
Reduced fraction — keep this form through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 88.995 rad/s instead of the exact 89.0118 rad/s — an error of 0.01679 rad/s.
What this speed looks like in practice
At 850 RPM a shaft turns about 1.13× as fast as a car engine at idle. A washing machine spin cycle turns about 1.41× faster.
Revolutions over time
That is 51,000 revolutions per hour and 1,224,000 per day. A quarter turn (90°) takes 17.6 ms, and the shaft sweeps 5.1° every millisecond.
Rim speed and centripetal load at ω = 89.0118 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.8901 m/s · 3.204 km/h | 79.23 m/s² · 8.079 g |
| 5 cm | 10 cm | 4.451 m/s · 16.02 km/h | 396.2 m/s² · 40.4 g |
| 10 cm | 20 cm | 8.901 m/s · 32.04 km/h | 792.3 m/s² · 80.79 g |
| 25 cm | 50 cm | 22.25 m/s · 80.11 km/h | 1,981 m/s² · 202 g |
| 50 cm | 1 m | 44.51 m/s · 160.2 km/h | 3,962 m/s² · 404 g |
| 1 m | 2 m | 89.01 m/s · 320.4 km/h | 7,923 m/s² · 807.9 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 850 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 14.17 Hz | Reachable with a VFD |
| 4 | 28.33 Hz | Reachable with a VFD |
| 6 | 42.5 Hz | Reachable with a VFD |
| 8 | 56.67 Hz | Reachable with a VFD |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 283.3 RPM · 29.67 rad/s | ×3 |
| 5:1 | 170 RPM · 17.8 rad/s | ×5 |
| 10:1 | 85 RPM · 8.901 rad/s | ×10 |
| 30:1 | 28.33 RPM · 2.967 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 3.962 J |
| 0.01 kg·m² (bench-grinder wheel) | 39.62 J |
| 0.1 kg·m² (car flywheel) | 396.2 J |
| 1 kg·m² (industrial flywheel) | 3.962 kJ |
Multiples of this speed
- 0.5× = 425 RPM44.5059 rad/s
- 2× = 1,700 RPM178.0236 rad/s
- 5× = 4,250 RPM445.059 rad/s
- 10× = 8,500 RPM890.1179 rad/s

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 850 RPM to radians per second, multiply 850 by π and divide by 30: 850 × (π / 30) = 89.011792 rad/s (approx. 89.012 rad/s).
850 RPM equals 14.1667 Hz (revolutions per second), calculated by dividing 850 by 60 seconds.
To convert 89.012 rad/s back to RPM, multiply by 30 and divide by π: 89.012 × (30 / π) ≈ 850 RPM.
At 850 RPM, one full 360° revolution takes 0.0706 seconds (70.59 ms).
A 4-pole induction motor has a synchronous speed of 850 RPM at 28.3333 Hz (f = RPM × poles / 120 = 850 × 4 / 120). Under load it runs roughly 2–4% below synchronous speed, so a VFD is normally set slightly higher.
Tangential speed is v = ω·r = 89.011792 rad/s × 0.1 m = 8.9012 m/s (32.0442 km/h). The centripetal acceleration at the rim is ω²·r = 792.3099 m/s².