RPM to Radians Per SecondRPM to rad/s

1,500 RPM to Radians Per Second Converter

Instant conversion for 1,500 RPM to rad/s (157.079633 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.

m
Result157.079633 rad/s
Radians per Second (rad/s)
157.07963
Degrees per Second (°/s)
9,000 °/s
Hertz (Hz)
25 Hz
Revolutions per Second (RPS)
25 rev/s
Revolutions per Hour (RPH)
90,000 rev/hr
Revolutions per Day
2,160,000 rev/day
Radians per Minute (rad/min)
9,424.778 rad/min
Milliradians per Second (mrad/s)
157,079.63 mrad/s
Period (seconds per rev)
0.04 s/rev
Exact Formula
1500 × π/30 = 157.07963 rad/s
Nearest Real-World Example
Washing machine spin (1,200 RPM)
Precision Drift Meter (Exact π/30 vs. 0.10472 Rounded)Zero Drift Here

Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:

Exact Value (π/30):157.079633 rad/s
Rounded (0.10472):157.080000 rad/s
Angular Error / Hour:75.77° / hr

Worked Conversion: 1,500 RPM to Radians Per Second

To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.

rad/s = 1500 × (π / 30) = 157.079633 rad/s

Exact fraction: 1500π/30 rad/s · Reciprocal: 157.08 rad/s × (30/π) = 1,500 RPM

Angular Velocity
157.079633 rad/s
Frequency
25 Hz
Degrees / Second
9,000 °/s
Period per Rev
0.04 s
Engineering Context: 1,500 RPM is the synchronous speed of a 4-pole machine on a 50 Hz supply, which makes it one of the most-quoted nameplate figures in European industrial drives.

Reverse Conversion: 157.08 rad/s to RPM

Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.

Browse Reverse Conversions →

In-Depth Engineering Guides & References

★ 1500 RPM in rad/s = 50π (157.08): 4-Pole 50 Hz Motors — Why 4-pole AC induction motors on 50 Hz European grids run at this synchronous speed and full-load slip.
5.36 Rad/s to RPM: College Physics Homework Benchmark Solution— Serway & Halliday kinematics proof and analytical derivation.
RPM to Radians Per Second Formula & Calculus Proof— Dimensional cancellation, π/30 derivation, and IEEE 754 precision.
Standard Motor RPMs: Synchronous Speeds & Slip— 50 Hz vs 60 Hz grids, pole counts, and synchronous motor speeds.
Angular Velocity Guide & Rotational Kinematics— SI standards, tangential velocity (v = ω·r), and centripetal acceleration.
Complete Conversion Index— Browse pre-calculated conversion speeds from 1 to 20,000 RPM.

1,500 RPM: exact form, real-world scale & engineering tables

Exact answer in terms of π

1,500 RPM = 50π rad/s ≈ 157.079633 rad/s

Reduced fraction — keep this form through multi-step problems and only round at the end.

Rounding check

Using the rounded factor 0.1047 gives 157.05 rad/s instead of the exact 157.0796 rad/s — an error of 0.02963 rad/s.

What this speed looks like in practice

At 1,500 RPM a shaft turns about 1.25× as fast as a washing machine spin cycle. A 4-pole motor on a 60 Hz grid turns about 1.2× faster.

Revolutions over time

That is 90,000 revolutions per hour and 2,160,000 per day. A quarter turn (90°) takes 10 ms, and the shaft sweeps 9° every millisecond.

Rim speed and centripetal load at ω = 157.0796 rad/s

Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.

RadiusDiameterRim speedCentripetal acceleration
1 cm2 cm1.571 m/s · 5.655 km/h246.7 m/s² · 25.16 g
5 cm10 cm7.854 m/s · 28.27 km/h1,234 m/s² · 125.8 g
10 cm20 cm15.71 m/s · 56.55 km/h2,467 m/s² · 251.6 g
25 cm50 cm39.27 m/s · 141.4 km/h6,169 m/s² · 629 g
50 cm1 m78.54 m/s · 282.7 km/h12,340 m/s² · 1,258 g
1 m2 m157.1 m/s · 565.5 km/h24,670 m/s² · 2,516 g

Driving this speed with an AC motor

Supply frequency an induction motor would need for a synchronous speed of 1,500 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.

PolesSupply frequencyPractical note
225 HzReachable with a VFD
450 HzStandard speed on a 50 Hz grid
675 HzReachable with a VFD
8100 HzReachable with a VFD

Through a reduction gearbox

Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.

RatioOutput speedTorque ×
3:1500 RPM · 52.36 rad/s×3
5:1300 RPM · 31.42 rad/s×5
10:1150 RPM · 15.71 rad/s×10
30:150 RPM · 5.236 rad/s×30

Stored rotational energy

Kinetic energy E = ½·I·ω² for a range of moments of inertia.

Moment of inertiaEnergy
0.001 kg·m² (small fan impeller)12.34 J
0.01 kg·m² (bench-grinder wheel)123.4 J
0.1 kg·m² (car flywheel)1.234 kJ
1 kg·m² (industrial flywheel)12.34 kJ

Multiples of this speed

Rizwan Malik headshot

Rizwan Malik

Founder & Editor

  • Formulas checked against the BIPM SI Brochure
  • Unit definitions per NIST SP 811

Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.

Frequently asked questions