29 RPM to Radians Per Second Converter
Instant conversion for 29 RPM to rad/s (3.036873 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 3.0368729
- Degrees per Second (°/s)
- 174 °/s
- Hertz (Hz)
- 0.483333 Hz
- Revolutions per Second (RPS)
- 0.483333 rev/s
- Revolutions per Hour (RPH)
- 1,740 rev/hr
- Revolutions per Day
- 41,760 rev/day
- Radians per Minute (rad/min)
- 182.21237 rad/min
- Milliradians per Second (mrad/s)
- 3,036.8729 mrad/s
- Period (seconds per rev)
- 2.068966 s/rev
- Exact Formula
- 29 × π/30 = 3.0368729 rad/s
- Nearest Real-World Example
- Ceiling fan — high (200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 29 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 29 × (π / 30) = 3.036873 rad/s
Exact fraction: 29π/30 rad/s · Reciprocal: 3.037 rad/s × (30/π) = 29 RPM
Reverse Conversion: 3.037 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
29 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
29 RPM = 29π/30 rad/s ≈ 3.036873 rad/s
Keep π symbolic through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 3.0363 rad/s instead of the exact 3.0369 rad/s — an error of 0.0005729 rad/s.
What this speed looks like in practice
At 29 RPM a shaft turns about 1.93× as fast as a utility-scale wind turbine rotor. An LP record (33⅓ RPM) turns about 1.15× faster.
Revolutions over time
That is 1,740 revolutions per hour and 41,760 per day. A quarter turn (90°) takes 517 ms, and the shaft sweeps 0.174° every millisecond.
Rim speed and centripetal load at ω = 3.0369 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.03037 m/s · 0.1093 km/h | 0.09223 m/s² · 0.009404 g |
| 5 cm | 10 cm | 0.1518 m/s · 0.5466 km/h | 0.4611 m/s² · 0.04702 g |
| 10 cm | 20 cm | 0.3037 m/s · 1.093 km/h | 0.9223 m/s² · 0.09404 g |
| 25 cm | 50 cm | 0.7592 m/s · 2.733 km/h | 2.306 m/s² · 0.2351 g |
| 50 cm | 1 m | 1.518 m/s · 5.466 km/h | 4.611 m/s² · 0.4702 g |
| 1 m | 2 m | 3.037 m/s · 10.93 km/h | 9.223 m/s² · 0.9404 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 29 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 0.4833 Hz | Below typical VFD range — use a gearbox |
| 4 | 0.9667 Hz | Below typical VFD range — use a gearbox |
| 6 | 1.45 Hz | Below typical VFD range — use a gearbox |
| 8 | 1.933 Hz | Below typical VFD range — use a gearbox |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 9.667 RPM · 1.012 rad/s | ×3 |
| 5:1 | 5.8 RPM · 0.6074 rad/s | ×5 |
| 10:1 | 2.9 RPM · 0.3037 rad/s | ×10 |
| 30:1 | 0.9667 RPM · 0.1012 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 0.004611 J |
| 0.01 kg·m² (bench-grinder wheel) | 0.04611 J |
| 0.1 kg·m² (car flywheel) | 0.4611 J |
| 1 kg·m² (industrial flywheel) | 4.611 J |
Multiples of this speed
- 0.5× = 14.5 RPM1.5184 rad/s
- 2× = 58 RPM6.0737 rad/s
- 5× = 145 RPM15.1844 rad/s
- 10× = 290 RPM30.3687 rad/s

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 29 RPM to radians per second, multiply 29 by π and divide by 30: 29 × (π / 30) = 3.036873 rad/s (approx. 3.037 rad/s).
29 RPM equals 0.4833 Hz (revolutions per second), calculated by dividing 29 by 60 seconds.
To convert 3.037 rad/s back to RPM, multiply by 30 and divide by π: 3.037 × (30 / π) ≈ 29 RPM.
At 29 RPM, one full 360° revolution takes 2.069 seconds (2068.97 ms).
A 4-pole induction motor has a synchronous speed of 29 RPM at 0.9667 Hz (f = RPM × poles / 120 = 29 × 4 / 120). That is far below a drive's usable range, so in practice a standard motor runs faster and a gearbox or gearmotor brings the output down to this speed.
Tangential speed is v = ω·r = 3.036873 rad/s × 0.1 m = 0.3037 m/s (1.0933 km/h). The centripetal acceleration at the rim is ω²·r = 0.9223 m/s².