31 RPM to Radians Per Second Converter
Instant conversion for 31 RPM to rad/s (3.246312 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 3.2463124
- Degrees per Second (°/s)
- 186 °/s
- Hertz (Hz)
- 0.516667 Hz
- Revolutions per Second (RPS)
- 0.516667 rev/s
- Revolutions per Hour (RPH)
- 1,860 rev/hr
- Revolutions per Day
- 44,640 rev/day
- Radians per Minute (rad/min)
- 194.77874 rad/min
- Milliradians per Second (mrad/s)
- 3,246.3124 mrad/s
- Period (seconds per rev)
- 1.935484 s/rev
- Exact Formula
- 31 × π/30 = 3.2463124 rad/s
- Nearest Real-World Example
- Ceiling fan — high (200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 31 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 31 × (π / 30) = 3.246312 rad/s
Exact fraction: 31π/30 rad/s · Reciprocal: 3.246 rad/s × (30/π) = 31 RPM
Reverse Conversion: 3.246 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
31 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
31 RPM = 31π/30 rad/s ≈ 3.246312 rad/s
Keep π symbolic through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 3.2457 rad/s instead of the exact 3.2463 rad/s — an error of 0.0006124 rad/s.
What this speed looks like in practice
At 31 RPM a shaft turns about 2.07× as fast as a utility-scale wind turbine rotor. An LP record (33⅓ RPM) turns about 1.08× faster.
Revolutions over time
That is 1,860 revolutions per hour and 44,640 per day. A quarter turn (90°) takes 484 ms, and the shaft sweeps 0.186° every millisecond.
Rim speed and centripetal load at ω = 3.2463 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.03246 m/s · 0.1169 km/h | 0.1054 m/s² · 0.01075 g |
| 5 cm | 10 cm | 0.1623 m/s · 0.5843 km/h | 0.5269 m/s² · 0.05373 g |
| 10 cm | 20 cm | 0.3246 m/s · 1.169 km/h | 1.054 m/s² · 0.1075 g |
| 25 cm | 50 cm | 0.8116 m/s · 2.922 km/h | 2.635 m/s² · 0.2687 g |
| 50 cm | 1 m | 1.623 m/s · 5.843 km/h | 5.269 m/s² · 0.5373 g |
| 1 m | 2 m | 3.246 m/s · 11.69 km/h | 10.54 m/s² · 1.075 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 31 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 0.5167 Hz | Below typical VFD range — use a gearbox |
| 4 | 1.033 Hz | Below typical VFD range — use a gearbox |
| 6 | 1.55 Hz | Below typical VFD range — use a gearbox |
| 8 | 2.067 Hz | Below typical VFD range — use a gearbox |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 10.33 RPM · 1.082 rad/s | ×3 |
| 5:1 | 6.2 RPM · 0.6493 rad/s | ×5 |
| 10:1 | 3.1 RPM · 0.3246 rad/s | ×10 |
| 30:1 | 1.033 RPM · 0.1082 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 0.005269 J |
| 0.01 kg·m² (bench-grinder wheel) | 0.05269 J |
| 0.1 kg·m² (car flywheel) | 0.5269 J |
| 1 kg·m² (industrial flywheel) | 5.269 J |
Multiples of this speed
- 0.5× = 15.5 RPM1.6232 rad/s
- 2× = 62 RPM6.4926 rad/s
- 5× = 155 RPM16.2316 rad/s
- 10× = 310 RPM32.4631 rad/s

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 31 RPM to radians per second, multiply 31 by π and divide by 30: 31 × (π / 30) = 3.246312 rad/s (approx. 3.246 rad/s).
31 RPM equals 0.5167 Hz (revolutions per second), calculated by dividing 31 by 60 seconds.
To convert 3.246 rad/s back to RPM, multiply by 30 and divide by π: 3.246 × (30 / π) ≈ 31 RPM.
At 31 RPM, one full 360° revolution takes 1.9355 seconds (1935.48 ms).
A 4-pole induction motor has a synchronous speed of 31 RPM at 1.0333 Hz (f = RPM × poles / 120 = 31 × 4 / 120). That is far below a drive's usable range, so in practice a standard motor runs faster and a gearbox or gearmotor brings the output down to this speed.
Tangential speed is v = ω·r = 3.246312 rad/s × 0.1 m = 0.3246 m/s (1.1687 km/h). The centripetal acceleration at the rim is ω²·r = 1.0539 m/s².