27 RPM to Radians Per Second Converter
Instant conversion for 27 RPM to rad/s (2.827433 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 2.8274334
- Degrees per Second (°/s)
- 162 °/s
- Hertz (Hz)
- 0.45 Hz
- Revolutions per Second (RPS)
- 0.45 rev/s
- Revolutions per Hour (RPH)
- 1,620 rev/hr
- Revolutions per Day
- 38,880 rev/day
- Radians per Minute (rad/min)
- 169.646 rad/min
- Milliradians per Second (mrad/s)
- 2,827.4334 mrad/s
- Period (seconds per rev)
- 2.222222 s/rev
- Exact Formula
- 27 × π/30 = 2.8274334 rad/s
- Nearest Real-World Example
- Ceiling fan — high (200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 27 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 27 × (π / 30) = 2.827433 rad/s
Exact fraction: 27π/30 rad/s · Reciprocal: 2.827 rad/s × (30/π) = 27 RPM
Reverse Conversion: 2.827 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
27 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
27 RPM = 9π/10 rad/s ≈ 2.827433 rad/s
Reduced fraction — keep this form through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 2.8269 rad/s instead of the exact 2.8274 rad/s — an error of 0.0005334 rad/s.
What this speed looks like in practice
At 27 RPM a shaft turns about 1.8× as fast as a utility-scale wind turbine rotor. An LP record (33⅓ RPM) turns about 1.23× faster.
Revolutions over time
That is 1,620 revolutions per hour and 38,880 per day. A quarter turn (90°) takes 556 ms, and the shaft sweeps 0.162° every millisecond.
Rim speed and centripetal load at ω = 2.8274 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.02827 m/s · 0.1018 km/h | 0.07994 m/s² · 0.008152 g |
| 5 cm | 10 cm | 0.1414 m/s · 0.5089 km/h | 0.3997 m/s² · 0.04076 g |
| 10 cm | 20 cm | 0.2827 m/s · 1.018 km/h | 0.7994 m/s² · 0.08152 g |
| 25 cm | 50 cm | 0.7069 m/s · 2.545 km/h | 1.999 m/s² · 0.2038 g |
| 50 cm | 1 m | 1.414 m/s · 5.089 km/h | 3.997 m/s² · 0.4076 g |
| 1 m | 2 m | 2.827 m/s · 10.18 km/h | 7.994 m/s² · 0.8152 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 27 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 0.45 Hz | Below typical VFD range — use a gearbox |
| 4 | 0.9 Hz | Below typical VFD range — use a gearbox |
| 6 | 1.35 Hz | Below typical VFD range — use a gearbox |
| 8 | 1.8 Hz | Below typical VFD range — use a gearbox |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 9 RPM · 0.9425 rad/s | ×3 |
| 5:1 | 5.4 RPM · 0.5655 rad/s | ×5 |
| 10:1 | 2.7 RPM · 0.2827 rad/s | ×10 |
| 30:1 | 0.9 RPM · 0.09425 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 0.003997 J |
| 0.01 kg·m² (bench-grinder wheel) | 0.03997 J |
| 0.1 kg·m² (car flywheel) | 0.3997 J |
| 1 kg·m² (industrial flywheel) | 3.997 J |
Multiples of this speed
- 0.5× = 13.5 RPM1.4137 rad/s
- 2× = 54 RPM5.6549 rad/s
- 5× = 135 RPM14.1372 rad/s
- 10× = 270 RPM28.2743 rad/s

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 27 RPM to radians per second, multiply 27 by π and divide by 30: 27 × (π / 30) = 2.827433 rad/s (approx. 2.827 rad/s).
27 RPM equals 0.4500 Hz (revolutions per second), calculated by dividing 27 by 60 seconds.
To convert 2.827 rad/s back to RPM, multiply by 30 and divide by π: 2.827 × (30 / π) ≈ 27 RPM.
At 27 RPM, one full 360° revolution takes 2.2222 seconds (2222.22 ms).
A 4-pole induction motor has a synchronous speed of 27 RPM at 0.9 Hz (f = RPM × poles / 120 = 27 × 4 / 120). That is far below a drive's usable range, so in practice a standard motor runs faster and a gearbox or gearmotor brings the output down to this speed.
Tangential speed is v = ω·r = 2.827433 rad/s × 0.1 m = 0.2827 m/s (1.0179 km/h). The centripetal acceleration at the rim is ω²·r = 0.7994 m/s².