RPM to Radians Per SecondRPM to rad/s

1,450 RPM to Radians Per Second Converter

Instant conversion for 1,450 RPM to rad/s (151.843645 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.

m
Result151.843645 rad/s
Radians per Second (rad/s)
151.84364
Degrees per Second (°/s)
8,700 °/s
Hertz (Hz)
24.166667 Hz
Revolutions per Second (RPS)
24.166667 rev/s
Revolutions per Hour (RPH)
87,000 rev/hr
Revolutions per Day
2,088,000 rev/day
Radians per Minute (rad/min)
9,110.6187 rad/min
Milliradians per Second (mrad/s)
151,843.64 mrad/s
Period (seconds per rev)
0.041379 s/rev
Exact Formula
1450 × π/30 = 151.84364 rad/s
Nearest Real-World Example
Washing machine spin (1,200 RPM)
Precision Drift Meter (Exact π/30 vs. 0.10472 Rounded)Zero Drift Here

Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:

Exact Value (π/30):151.843645 rad/s
Rounded (0.10472):151.844000 rad/s
Angular Error / Hour:73.24° / hr

Worked Conversion: 1,450 RPM to Radians Per Second

To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.

rad/s = 1450 × (π / 30) = 151.843645 rad/s

Exact fraction: 1450π/30 rad/s · Reciprocal: 151.84 rad/s × (30/π) = 1,450 RPM

Angular Velocity
151.843645 rad/s
Frequency
24.1667 Hz
Degrees / Second
8,700 °/s
Period per Rev
0.0414 s
Engineering Context: 1,450 RPM is the typical loaded speed of a 4-pole induction motor running on 50 Hz mains — just under the 1,500 RPM synchronous speed, the difference being slip.

Reverse Conversion: 151.84 rad/s to RPM

Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.

Browse Reverse Conversions →

In-Depth Engineering Guides & References

5.36 Rad/s to RPM: College Physics Homework Benchmark Solution— Serway & Halliday kinematics proof and analytical derivation.
RPM to Radians Per Second Formula & Calculus Proof— Dimensional cancellation, π/30 derivation, and IEEE 754 precision.
Standard Motor RPMs: Synchronous Speeds & Slip— 50 Hz vs 60 Hz grids, pole counts, and synchronous motor speeds.
Angular Velocity Guide & Rotational Kinematics— SI standards, tangential velocity (v = ω·r), and centripetal acceleration.
Complete Conversion Index— Browse pre-calculated conversion speeds from 1 to 20,000 RPM.

1,450 RPM: exact form, real-world scale & engineering tables

Exact answer in terms of π

1,450 RPM = 145π/3 rad/s ≈ 151.843645 rad/s

Reduced fraction — keep this form through multi-step problems and only round at the end.

Rounding check

Using the rounded factor 0.1047 gives 151.815 rad/s instead of the exact 151.8436 rad/s — an error of 0.02864 rad/s.

What this speed looks like in practice

At 1,450 RPM a shaft turns about 1.21× as fast as a washing machine spin cycle. A 4-pole motor on a 60 Hz grid turns about 1.24× faster.

Revolutions over time

That is 87,000 revolutions per hour and 2,088,000 per day. A quarter turn (90°) takes 10.3 ms, and the shaft sweeps 8.7° every millisecond.

Rim speed and centripetal load at ω = 151.8436 rad/s

Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.

RadiusDiameterRim speedCentripetal acceleration
1 cm2 cm1.518 m/s · 5.466 km/h230.6 m/s² · 23.51 g
5 cm10 cm7.592 m/s · 27.33 km/h1,153 m/s² · 117.6 g
10 cm20 cm15.18 m/s · 54.66 km/h2,306 m/s² · 235.1 g
25 cm50 cm37.96 m/s · 136.7 km/h5,764 m/s² · 587.8 g
50 cm1 m75.92 m/s · 273.3 km/h11,530 m/s² · 1,176 g
1 m2 m151.8 m/s · 546.6 km/h23,060 m/s² · 2,351 g

Driving this speed with an AC motor

Supply frequency an induction motor would need for a synchronous speed of 1,450 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.

PolesSupply frequencyPractical note
224.17 HzReachable with a VFD
448.33 HzReachable with a VFD
672.5 HzReachable with a VFD
896.67 HzReachable with a VFD

Through a reduction gearbox

Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.

RatioOutput speedTorque ×
3:1483.3 RPM · 50.61 rad/s×3
5:1290 RPM · 30.37 rad/s×5
10:1145 RPM · 15.18 rad/s×10
30:148.33 RPM · 5.061 rad/s×30

Stored rotational energy

Kinetic energy E = ½·I·ω² for a range of moments of inertia.

Moment of inertiaEnergy
0.001 kg·m² (small fan impeller)11.53 J
0.01 kg·m² (bench-grinder wheel)115.3 J
0.1 kg·m² (car flywheel)1.153 kJ
1 kg·m² (industrial flywheel)11.53 kJ

Multiples of this speed

Rizwan Malik headshot

Rizwan Malik

Founder & Editor

  • Formulas checked against the BIPM SI Brochure
  • Unit definitions per NIST SP 811

Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.

Frequently asked questions