RPM to Radians Per SecondRPM to rad/s

1,750 RPM to Radians Per Second Converter

Instant conversion for 1,750 RPM to rad/s (183.259571 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.

m
Result183.259571 rad/s
Radians per Second (rad/s)
183.25957
Degrees per Second (°/s)
10,500 °/s
Hertz (Hz)
29.166667 Hz
Revolutions per Second (RPS)
29.166667 rev/s
Revolutions per Hour (RPH)
105,000 rev/hr
Revolutions per Day
2,520,000 rev/day
Radians per Minute (rad/min)
10,995.574 rad/min
Milliradians per Second (mrad/s)
183,259.57 mrad/s
Period (seconds per rev)
0.034286 s/rev
Exact Formula
1750 × π/30 = 183.25957 rad/s
Nearest Real-World Example
Power drill (2,000 RPM)
Precision Drift Meter (Exact π/30 vs. 0.10472 Rounded)Zero Drift Here

Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:

Exact Value (π/30):183.259571 rad/s
Rounded (0.10472):183.260000 rad/s
Angular Error / Hour:88.39° / hr

Worked Conversion: 1,750 RPM to Radians Per Second

To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.

rad/s = 1750 × (π / 30) = 183.259571 rad/s

Exact fraction: 1750π/30 rad/s · Reciprocal: 183.26 rad/s × (30/π) = 1,750 RPM

Angular Velocity
183.259571 rad/s
Frequency
29.1667 Hz
Degrees / Second
10,500 °/s
Period per Rev
0.0343 s
Engineering Context: 1,750 RPM is the classic loaded nameplate speed of a 4-pole motor on 60 Hz mains, sitting just below the 1,800 RPM synchronous figure.

Reverse Conversion: 183.26 rad/s to RPM

Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.

Browse Reverse Conversions →

In-Depth Engineering Guides & References

5.36 Rad/s to RPM: College Physics Homework Benchmark Solution— Serway & Halliday kinematics proof and analytical derivation.
RPM to Radians Per Second Formula & Calculus Proof— Dimensional cancellation, π/30 derivation, and IEEE 754 precision.
Standard Motor RPMs: Synchronous Speeds & Slip— 50 Hz vs 60 Hz grids, pole counts, and synchronous motor speeds.
Angular Velocity Guide & Rotational Kinematics— SI standards, tangential velocity (v = ω·r), and centripetal acceleration.
Complete Conversion Index— Browse pre-calculated conversion speeds from 1 to 20,000 RPM.

1,750 RPM: exact form, real-world scale & engineering tables

Exact answer in terms of π

1,750 RPM = 175π/3 rad/s ≈ 183.259571 rad/s

Reduced fraction — keep this form through multi-step problems and only round at the end.

Rounding check

Using the rounded factor 0.1047 gives 183.225 rad/s instead of the exact 183.2596 rad/s — an error of 0.03457 rad/s.

What this speed looks like in practice

At 1,750 RPM a shaft turns about 1.46× as fast as a washing machine spin cycle. A 4-pole motor on a 60 Hz grid turns about 1.03× faster.

Revolutions over time

That is 105,000 revolutions per hour and 2,520,000 per day. A quarter turn (90°) takes 8.57 ms, and the shaft sweeps 10.5° every millisecond.

Rim speed and centripetal load at ω = 183.2596 rad/s

Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.

RadiusDiameterRim speedCentripetal acceleration
1 cm2 cm1.833 m/s · 6.597 km/h335.8 m/s² · 34.25 g
5 cm10 cm9.163 m/s · 32.99 km/h1,679 m/s² · 171.2 g
10 cm20 cm18.33 m/s · 65.97 km/h3,358 m/s² · 342.5 g
25 cm50 cm45.81 m/s · 164.9 km/h8,396 m/s² · 856.2 g
50 cm1 m91.63 m/s · 329.9 km/h16,790 m/s² · 1,712 g
1 m2 m183.3 m/s · 659.7 km/h33,580 m/s² · 3,425 g

Driving this speed with an AC motor

Supply frequency an induction motor would need for a synchronous speed of 1,750 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.

PolesSupply frequencyPractical note
229.17 HzReachable with a VFD
458.33 HzReachable with a VFD
687.5 HzReachable with a VFD
8116.7 HzReachable with a VFD

Through a reduction gearbox

Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.

RatioOutput speedTorque ×
3:1583.3 RPM · 61.09 rad/s×3
5:1350 RPM · 36.65 rad/s×5
10:1175 RPM · 18.33 rad/s×10
30:158.33 RPM · 6.109 rad/s×30

Stored rotational energy

Kinetic energy E = ½·I·ω² for a range of moments of inertia.

Moment of inertiaEnergy
0.001 kg·m² (small fan impeller)16.79 J
0.01 kg·m² (bench-grinder wheel)167.9 J
0.1 kg·m² (car flywheel)1.679 kJ
1 kg·m² (industrial flywheel)16.79 kJ

Multiples of this speed

Rizwan Malik headshot

Rizwan Malik

Founder & Editor

  • Formulas checked against the BIPM SI Brochure
  • Unit definitions per NIST SP 811

Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.

Frequently asked questions