15,000 RPM to Radians Per Second Converter
Instant conversion for 15,000 RPM to rad/s (1570.796327 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 1570.7963
- Degrees per Second (°/s)
- 90,000 °/s
- Hertz (Hz)
- 250 Hz
- Revolutions per Second (RPS)
- 250 rev/s
- Revolutions per Hour (RPH)
- 900,000 rev/hr
- Revolutions per Day
- 21,600,000 rev/day
- Radians per Minute (rad/min)
- 94,247.78 rad/min
- Milliradians per Second (mrad/s)
- 1,570,796.3 mrad/s
- Period (seconds per rev)
- 0.004 s/rev
- Exact Formula
- 15000 × π/30 = 1570.7963 rad/s
- Nearest Real-World Example
- Jet engine — cruise (15,000 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 15,000 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 15000 × (π / 30) = 1570.796327 rad/s
Exact fraction: 15000π/30 rad/s · Reciprocal: 1570.8 rad/s × (30/π) = 15,000 RPM
Reverse Conversion: 1570.8 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
15,000 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
15,000 RPM = 500π rad/s ≈ 1,570.796327 rad/s
Reduced fraction — keep this form through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 1,570.5 rad/s instead of the exact 1,570.7963 rad/s — an error of 0.2963 rad/s.
What this speed looks like in practice
At 15,000 RPM a shaft turns about 1.36× as fast as a 115 mm angle grinder. A rotary multi-tool at full speed turns about 2.33× faster.
Revolutions over time
That is 900,000 revolutions per hour and 21,600,000 per day. A quarter turn (90°) takes 1 ms, and the shaft sweeps 90° every millisecond.
Rim speed and centripetal load at ω = 1,570.7963 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 15.71 m/s · 56.55 km/h | 24,670 m/s² · 2,516 g |
| 5 cm | 10 cm | 78.54 m/s · 282.7 km/h | 123,400 m/s² · 12,580 g |
| 10 cm | 20 cm | 157.1 m/s · 565.5 km/h | 246,700 m/s² · 25,160 g |
| 25 cm | 50 cm | 392.7 m/s · 1,414 km/h | 616,900 m/s² · 62,900 g |
| 50 cm | 1 m | 785.4 m/s · 2,827 km/h | 1,234,000 m/s² · 125,800 g |
| 1 m | 2 m | 1,571 m/s · 5,655 km/h | 2,467,000 m/s² · 251,600 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 15,000 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 250 Hz | Above typical VFD range |
| 4 | 500 Hz | Above typical VFD range |
| 6 | 750 Hz | Above typical VFD range |
| 8 | 1,000 Hz | Above typical VFD range |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 5,000 RPM · 523.6 rad/s | ×3 |
| 5:1 | 3,000 RPM · 314.2 rad/s | ×5 |
| 10:1 | 1,500 RPM · 157.1 rad/s | ×10 |
| 30:1 | 500 RPM · 52.36 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 1.234 kJ |
| 0.01 kg·m² (bench-grinder wheel) | 12.34 kJ |
| 0.1 kg·m² (car flywheel) | 123.4 kJ |
| 1 kg·m² (industrial flywheel) | 1.234 MJ |
Multiples of this speed
- 0.5× = 7,500 RPM785.3982 rad/s
- 2× = 30,000 RPM3,141.5927 rad/s
- 5× = 75,000 RPM7,853.9816 rad/s
- 10× = 150,000 RPM15,707.9633 rad/s

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 15,000 RPM to radians per second, multiply 15000 by π and divide by 30: 15000 × (π / 30) = 1570.796327 rad/s (approx. 1570.8 rad/s).
15,000 RPM equals 250.0000 Hz (revolutions per second), calculated by dividing 15000 by 60 seconds.
To convert 1570.8 rad/s back to RPM, multiply by 30 and divide by π: 1570.8 × (30 / π) ≈ 15,000 RPM.
At 15,000 RPM, one full 360° revolution takes 0.004 seconds (4.00 ms).
A 4-pole induction motor has a synchronous speed of 15,000 RPM at 500 Hz (f = RPM × poles / 120 = 15000 × 4 / 120). That is beyond a standard motor and drive, so this speed calls for a high-speed spindle motor or a step-up transmission.
Tangential speed is v = ω·r = 1570.796327 rad/s × 0.1 m = 157.0796 m/s (565.4867 km/h). The centripetal acceleration at the rim is ω²·r = 246740.11 m/s².