RPM to Radians Per SecondRPM to rad/s

104.72 Rad/s to RPM Converter

Instant conversion for 104.72 rad/s to RPM (1000.0023 RPM). Analytical 30/π formula, rotational frequency in Hz, and full kinematics.

m
Result1,000.0023 RPM
RPM
1,000.0023
Degrees per Second (°/s)
6,000.014 °/s
Hertz (Hz)
16.666706 Hz
Revolutions per Second (RPS)
16.666706 rev/s
Revolutions per Hour (RPH)
60,000.14 rev/hr
Revolutions per Day
1,440,003.4 rev/day
Radians per Minute (rad/min)
6,283.2 rad/min
Milliradians per Second (mrad/s)
104,720 mrad/s
Period (seconds per rev)
0.06 s/rev
Exact Formula
104.72 × 30/π = 1,000.0023 RPM
Nearest Real-World Example
Washing machine spin (1,200 RPM)
Precision Drift Meter (Exact π/30 vs. 0.10472 Rounded)Zero Drift Here

Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:

Exact Value (π/30):104.720000 rad/s
Rounded (0.10472):104.720245 rad/s
Angular Error / Hour:50.51° / hr

Worked Conversion: 104.72 Rad/s to RPM

To convert radians per second (rad/s) to revolutions per minute (RPM), multiply by 60 seconds per minute and divide by 2π radians per revolution. The analytical reciprocal simplifies to 30/π (≈ 9.549297).

RPM = 104.72 × (30 / π) = 1000.0023 RPM

Exact fraction: (104.72 × 30)/π RPM · Reciprocal: 1000 RPM × (π/30) = 104.72 rad/s

Rotational Speed
1000.0023 RPM
Frequency
16.6667 Hz
Degrees / Second
6,000.01 °/s
Period per Rev
0.06 s
Engineering Context: At 104.72 rad/s (industrial electric motor speed (1000 RPM)), Operating at 104.72 rad/s translates to 1000 RPM (16.7 Hz), characteristic of multi-pole AC induction motors and centrifugal pumps.

Forward Conversion: 1,000 RPM to Rad/s

Need to convert from revolutions per minute back to radians per second? Explore the standard forward converter with exact π/30 precision.

Open 1,000 RPM Converter →

In-Depth Engineering Guides & References

Rad/s to RPM Converter & Formula (RPM = ω × 30/π)— The reverse factor, worked examples and a rad/s to RPM table.
How to Convert rad/s to RPM, Step by Step— Unit cancellation and exam-style worked problems.
5.36 Rad/s to RPM: Physics Homework Solution— Serway & Halliday kinematics proof and analytical derivation.
RPM to Radians Per Second Formula & Calculus Proof— Dimensional cancellation, π/30 derivation, and IEEE 754 precision.
Angular Velocity Guide & Rotational Kinematics— SI standards, tangential velocity (v = ω·r), and centripetal acceleration.
Complete Conversion Index— Browse all forward and reverse conversion tables.

104.72 rad/s: exact form, real-world scale & engineering tables

Exact answer in terms of π

104.72 rad/s = 3,141.6/π RPM ≈ 1,000.002338 RPM

Keep π symbolic through multi-step problems and only round at the end.

Rounding check

Using the rounded factor 9.55 gives 1,000.076 RPM instead of the exact 1,000.0023 RPM — an error of 0.07366 RPM.

What this speed looks like in practice

At 1,000.0023 RPM a shaft turns about 1.33× as fast as a car engine at idle. A washing machine spin cycle turns about 1.2× faster.

Revolutions over time

That is 60,000 revolutions per hour and 1,440,000 per day. A quarter turn (90°) takes 15 ms, and the shaft sweeps 6° every millisecond.

Rim speed and centripetal load at ω = 104.72 rad/s

Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.

RadiusDiameterRim speedCentripetal acceleration
1 cm2 cm1.047 m/s · 3.77 km/h109.7 m/s² · 11.18 g
5 cm10 cm5.236 m/s · 18.85 km/h548.3 m/s² · 55.91 g
10 cm20 cm10.47 m/s · 37.7 km/h1,097 m/s² · 111.8 g
25 cm50 cm26.18 m/s · 94.25 km/h2,742 m/s² · 279.6 g
50 cm1 m52.36 m/s · 188.5 km/h5,483 m/s² · 559.1 g
1 m2 m104.7 m/s · 377 km/h10,970 m/s² · 1,118 g

Driving this speed with an AC motor

Supply frequency an induction motor would need for a synchronous speed of 1,000 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.

PolesSupply frequencyPractical note
216.67 HzReachable with a VFD
433.33 HzReachable with a VFD
650 HzStandard speed on a 50 Hz grid
866.67 HzReachable with a VFD

Through a reduction gearbox

Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.

RatioOutput speedTorque ×
3:1333.3 RPM · 34.91 rad/s×3
5:1200 RPM · 20.94 rad/s×5
10:1100 RPM · 10.47 rad/s×10
30:133.33 RPM · 3.491 rad/s×30

Stored rotational energy

Kinetic energy E = ½·I·ω² for a range of moments of inertia.

Moment of inertiaEnergy
0.001 kg·m² (small fan impeller)5.483 J
0.01 kg·m² (bench-grinder wheel)54.83 J
0.1 kg·m² (car flywheel)548.3 J
1 kg·m² (industrial flywheel)5.483 kJ

Multiples of this speed

  • 0.5× = 52.36 rad/s500.0012 RPM
  • 2× = 209.44 rad/s2,000.0047 RPM
  • 5× = 523.6 rad/s5,000.0117 RPM
  • 10× = 1,047.2 rad/s10,000.0234 RPM
Rizwan Malik headshot

Rizwan Malik

Founder & Editor

  • Formulas checked against the BIPM SI Brochure
  • Unit definitions per NIST SP 811

Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.

Frequently asked questions