7,000 RPM to Radians Per Second Converter
Instant conversion for 7,000 RPM to rad/s (733.038286 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 733.03829
- Degrees per Second (°/s)
- 42,000 °/s
- Hertz (Hz)
- 116.66667 Hz
- Revolutions per Second (RPS)
- 116.66667 rev/s
- Revolutions per Hour (RPH)
- 420,000 rev/hr
- Revolutions per Day
- 10,080,000 rev/day
- Radians per Minute (rad/min)
- 43,982.297 rad/min
- Milliradians per Second (mrad/s)
- 733,038.29 mrad/s
- Period (seconds per rev)
- 0.008571 s/rev
- Exact Formula
- 7000 × π/30 = 733.03829 rad/s
- Nearest Real-World Example
- Car engine — redline (7,000 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 7,000 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 7000 × (π / 30) = 733.038286 rad/s
Exact fraction: 7000π/30 rad/s · Reciprocal: 733.04 rad/s × (30/π) = 7,000 RPM
Reverse Conversion: 733.04 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
7,000 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
7,000 RPM = 700π/3 rad/s ≈ 733.038286 rad/s
Reduced fraction — keep this form through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 732.9 rad/s instead of the exact 733.0383 rad/s — an error of 0.1383 rad/s.
What this speed looks like in practice
At 7,000 RPM a shaft turns about 1.3× as fast as a laptop hard drive (5,400 RPM). A desktop hard drive (7,200 RPM) turns about 1.03× faster.
Revolutions over time
That is 420,000 revolutions per hour and 10,080,000 per day. A quarter turn (90°) takes 2.14 ms, and the shaft sweeps 42° every millisecond.
Rim speed and centripetal load at ω = 733.0383 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 7.33 m/s · 26.39 km/h | 5,373 m/s² · 547.9 g |
| 5 cm | 10 cm | 36.65 m/s · 131.9 km/h | 26,870 m/s² · 2,740 g |
| 10 cm | 20 cm | 73.3 m/s · 263.9 km/h | 53,730 m/s² · 5,479 g |
| 25 cm | 50 cm | 183.3 m/s · 659.7 km/h | 134,300 m/s² · 13,700 g |
| 50 cm | 1 m | 366.5 m/s · 1,319 km/h | 268,700 m/s² · 27,400 g |
| 1 m | 2 m | 733 m/s · 2,639 km/h | 537,300 m/s² · 54,790 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 7,000 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 116.7 Hz | Reachable with a VFD |
| 4 | 233.3 Hz | Above typical VFD range |
| 6 | 350 Hz | Above typical VFD range |
| 8 | 466.7 Hz | Above typical VFD range |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 2,333 RPM · 244.3 rad/s | ×3 |
| 5:1 | 1,400 RPM · 146.6 rad/s | ×5 |
| 10:1 | 700 RPM · 73.3 rad/s | ×10 |
| 30:1 | 233.3 RPM · 24.43 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 268.7 J |
| 0.01 kg·m² (bench-grinder wheel) | 2.687 kJ |
| 0.1 kg·m² (car flywheel) | 26.87 kJ |
| 1 kg·m² (industrial flywheel) | 268.7 kJ |
Multiples of this speed
- 0.5× = 3,500 RPM366.5191 rad/s
- 2× = 14,000 RPM1,466.0766 rad/s
- 5× = 35,000 RPM3,665.1914 rad/s
- 10× = 70,000 RPM7,330.3829 rad/s

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 7,000 RPM to radians per second, multiply 7000 by π and divide by 30: 7000 × (π / 30) = 733.038286 rad/s (approx. 733.04 rad/s).
7,000 RPM equals 116.6667 Hz (revolutions per second), calculated by dividing 7000 by 60 seconds.
To convert 733.04 rad/s back to RPM, multiply by 30 and divide by π: 733.04 × (30 / π) ≈ 7,000 RPM.
At 7,000 RPM, one full 360° revolution takes 0.0086 seconds (8.57 ms).
A 4-pole induction motor has a synchronous speed of 7,000 RPM at 233.3333 Hz (f = RPM × poles / 120 = 7000 × 4 / 120). That is beyond a standard motor and drive, so this speed calls for a high-speed spindle motor or a step-up transmission.
Tangential speed is v = ω·r = 733.038286 rad/s × 0.1 m = 73.3038 m/s (263.8938 km/h). The centripetal acceleration at the rim is ω²·r = 53734.5129 m/s².