63 RPM to Radians Per Second Converter
Instant conversion for 63 RPM to rad/s (6.597345 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 6.5973446
- Degrees per Second (°/s)
- 378 °/s
- Hertz (Hz)
- 1.05 Hz
- Revolutions per Second (RPS)
- 1.05 rev/s
- Revolutions per Hour (RPH)
- 3,780 rev/hr
- Revolutions per Day
- 90,720 rev/day
- Radians per Minute (rad/min)
- 395.84067 rad/min
- Milliradians per Second (mrad/s)
- 6,597.3446 mrad/s
- Period (seconds per rev)
- 0.952381 s/rev
- Exact Formula
- 63 × π/30 = 6.5973446 rad/s
- Nearest Real-World Example
- Ceiling fan — high (200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 63 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 63 × (π / 30) = 6.597345 rad/s
Exact fraction: 63π/30 rad/s · Reciprocal: 6.597 rad/s × (30/π) = 63 RPM
Reverse Conversion: 6.597 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
63 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
63 RPM = 21π/10 rad/s ≈ 6.597345 rad/s
Reduced fraction — keep this form through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 6.5961 rad/s instead of the exact 6.5973 rad/s — an error of 0.001245 rad/s.
What this speed looks like in practice
At 63 RPM a shaft turns about 1.4× as fast as a 7-inch single (45 RPM). A ceiling fan on high turns about 3.17× faster.
Revolutions over time
That is 3,780 revolutions per hour and 90,720 per day. A quarter turn (90°) takes 238 ms, and the shaft sweeps 0.378° every millisecond.
Rim speed and centripetal load at ω = 6.5973 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.06597 m/s · 0.2375 km/h | 0.4352 m/s² · 0.04438 g |
| 5 cm | 10 cm | 0.3299 m/s · 1.188 km/h | 2.176 m/s² · 0.2219 g |
| 10 cm | 20 cm | 0.6597 m/s · 2.375 km/h | 4.352 m/s² · 0.4438 g |
| 25 cm | 50 cm | 1.649 m/s · 5.938 km/h | 10.88 m/s² · 1.11 g |
| 50 cm | 1 m | 3.299 m/s · 11.88 km/h | 21.76 m/s² · 2.219 g |
| 1 m | 2 m | 6.597 m/s · 23.75 km/h | 43.52 m/s² · 4.438 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 63 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 1.05 Hz | Below typical VFD range — use a gearbox |
| 4 | 2.1 Hz | Below typical VFD range — use a gearbox |
| 6 | 3.15 Hz | Below typical VFD range — use a gearbox |
| 8 | 4.2 Hz | Below typical VFD range — use a gearbox |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 21 RPM · 2.199 rad/s | ×3 |
| 5:1 | 12.6 RPM · 1.319 rad/s | ×5 |
| 10:1 | 6.3 RPM · 0.6597 rad/s | ×10 |
| 30:1 | 2.1 RPM · 0.2199 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 0.02176 J |
| 0.01 kg·m² (bench-grinder wheel) | 0.2176 J |
| 0.1 kg·m² (car flywheel) | 2.176 J |
| 1 kg·m² (industrial flywheel) | 21.76 J |
Multiples of this speed
- 0.5× = 31.5 RPM3.2987 rad/s
- 2× = 126 RPM13.1947 rad/s
- 5× = 315 RPM32.9867 rad/s
- 10× = 630 RPM65.9734 rad/s

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 63 RPM to radians per second, multiply 63 by π and divide by 30: 63 × (π / 30) = 6.597345 rad/s (approx. 6.597 rad/s).
63 RPM equals 1.0500 Hz (revolutions per second), calculated by dividing 63 by 60 seconds.
To convert 6.597 rad/s back to RPM, multiply by 30 and divide by π: 6.597 × (30 / π) ≈ 63 RPM.
At 63 RPM, one full 360° revolution takes 0.9524 seconds (952.38 ms).
A 4-pole induction motor has a synchronous speed of 63 RPM at 2.1 Hz (f = RPM × poles / 120 = 63 × 4 / 120). That is far below a drive's usable range, so in practice a standard motor runs faster and a gearbox or gearmotor brings the output down to this speed.
Tangential speed is v = ω·r = 6.597345 rad/s × 0.1 m = 0.6597 m/s (2.375 km/h). The centripetal acceleration at the rim is ω²·r = 4.3525 m/s².