56 RPM to Radians Per Second Converter
Instant conversion for 56 RPM to rad/s (5.864306 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 5.8643063
- Degrees per Second (°/s)
- 336 °/s
- Hertz (Hz)
- 0.933333 Hz
- Revolutions per Second (RPS)
- 0.933333 rev/s
- Revolutions per Hour (RPH)
- 3,360 rev/hr
- Revolutions per Day
- 80,640 rev/day
- Radians per Minute (rad/min)
- 351.85838 rad/min
- Milliradians per Second (mrad/s)
- 5,864.3063 mrad/s
- Period (seconds per rev)
- 1.071429 s/rev
- Exact Formula
- 56 × π/30 = 5.8643063 rad/s
- Nearest Real-World Example
- Ceiling fan — high (200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 56 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 56 × (π / 30) = 5.864306 rad/s
Exact fraction: 56π/30 rad/s · Reciprocal: 5.864 rad/s × (30/π) = 56 RPM
Reverse Conversion: 5.864 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
56 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
56 RPM = 28π/15 rad/s ≈ 5.864306 rad/s
Reduced fraction — keep this form through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 5.8632 rad/s instead of the exact 5.8643 rad/s — an error of 0.001106 rad/s.
What this speed looks like in practice
At 56 RPM a shaft turns about 1.24× as fast as a 7-inch single (45 RPM). A ceiling fan on high turns about 3.57× faster.
Revolutions over time
That is 3,360 revolutions per hour and 80,640 per day. A quarter turn (90°) takes 268 ms, and the shaft sweeps 0.336° every millisecond.
Rim speed and centripetal load at ω = 5.8643 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.05864 m/s · 0.2111 km/h | 0.3439 m/s² · 0.03507 g |
| 5 cm | 10 cm | 0.2932 m/s · 1.056 km/h | 1.72 m/s² · 0.1753 g |
| 10 cm | 20 cm | 0.5864 m/s · 2.111 km/h | 3.439 m/s² · 0.3507 g |
| 25 cm | 50 cm | 1.466 m/s · 5.278 km/h | 8.598 m/s² · 0.8767 g |
| 50 cm | 1 m | 2.932 m/s · 10.56 km/h | 17.2 m/s² · 1.753 g |
| 1 m | 2 m | 5.864 m/s · 21.11 km/h | 34.39 m/s² · 3.507 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 56 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 0.9333 Hz | Below typical VFD range — use a gearbox |
| 4 | 1.867 Hz | Below typical VFD range — use a gearbox |
| 6 | 2.8 Hz | Below typical VFD range — use a gearbox |
| 8 | 3.733 Hz | Below typical VFD range — use a gearbox |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 18.67 RPM · 1.955 rad/s | ×3 |
| 5:1 | 11.2 RPM · 1.173 rad/s | ×5 |
| 10:1 | 5.6 RPM · 0.5864 rad/s | ×10 |
| 30:1 | 1.867 RPM · 0.1955 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 0.0172 J |
| 0.01 kg·m² (bench-grinder wheel) | 0.172 J |
| 0.1 kg·m² (car flywheel) | 1.72 J |
| 1 kg·m² (industrial flywheel) | 17.2 J |
Multiples of this speed
- 0.5× = 28 RPM2.9322 rad/s
- 2× = 112 RPM11.7286 rad/s
- 5× = 280 RPM29.3215 rad/s
- 10× = 560 RPM58.6431 rad/s

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 56 RPM to radians per second, multiply 56 by π and divide by 30: 56 × (π / 30) = 5.864306 rad/s (approx. 5.864 rad/s).
56 RPM equals 0.9333 Hz (revolutions per second), calculated by dividing 56 by 60 seconds.
To convert 5.864 rad/s back to RPM, multiply by 30 and divide by π: 5.864 × (30 / π) ≈ 56 RPM.
At 56 RPM, one full 360° revolution takes 1.0714 seconds (1071.43 ms).
A 4-pole induction motor has a synchronous speed of 56 RPM at 1.8667 Hz (f = RPM × poles / 120 = 56 × 4 / 120). That is far below a drive's usable range, so in practice a standard motor runs faster and a gearbox or gearmotor brings the output down to this speed.
Tangential speed is v = ω·r = 5.864306 rad/s × 0.1 m = 0.5864 m/s (2.1112 km/h). The centripetal acceleration at the rim is ω²·r = 3.439 m/s².