RPM to Radians Per SecondRPM to rad/s

50 RPM to Radians Per Second Converter

Instant conversion for 50 RPM to rad/s (5.235988 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.

m
Result5.235988 rad/s
Radians per Second (rad/s)
5.2359878
Degrees per Second (°/s)
300 °/s
Hertz (Hz)
0.833333 Hz
Revolutions per Second (RPS)
0.833333 rev/s
Revolutions per Hour (RPH)
3,000 rev/hr
Revolutions per Day
72,000 rev/day
Radians per Minute (rad/min)
314.15927 rad/min
Milliradians per Second (mrad/s)
5,235.9878 mrad/s
Period (seconds per rev)
1.2 s/rev
Exact Formula
50 × π/30 = 5.2359878 rad/s
Nearest Real-World Example
Ceiling fan — high (200 RPM)
Precision Drift Meter (Exact π/30 vs. 0.10472 Rounded)Zero Drift Here

Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:

Exact Value (π/30):5.235988 rad/s
Rounded (0.10472):5.236000 rad/s
Angular Error / Hour:2.53° / hr

Worked Conversion: 50 RPM to Radians Per Second

To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.

rad/s = 50 × (π / 30) = 5.235988 rad/s

Exact fraction: 50π/30 rad/s · Reciprocal: 5.236 rad/s × (30/π) = 50 RPM

Angular Velocity
5.235988 rad/s
Frequency
0.8333 Hz
Degrees / Second
300 °/s
Period per Rev
1.2 s
Engineering Context: The 20–50 RPM band is turntable and potter's-wheel country, and it brackets both vinyl standards (33⅓ and 45 RPM).

Reverse Conversion: 5.236 rad/s to RPM

Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.

Browse Reverse Conversions →

In-Depth Engineering Guides & References

5.36 Rad/s to RPM: College Physics Homework Benchmark Solution— Serway & Halliday kinematics proof and analytical derivation.
RPM to Radians Per Second Formula & Calculus Proof— Dimensional cancellation, π/30 derivation, and IEEE 754 precision.
Angular Velocity Guide & Rotational Kinematics— SI standards, tangential velocity (v = ω·r), and centripetal acceleration.
Complete Conversion Index— Browse pre-calculated conversion speeds from 1 to 20,000 RPM.

50 RPM: exact form, real-world scale & engineering tables

Exact answer in terms of π

50 RPM = 5π/3 rad/s ≈ 5.235988 rad/s

Reduced fraction — keep this form through multi-step problems and only round at the end.

Rounding check

Using the rounded factor 0.1047 gives 5.235 rad/s instead of the exact 5.236 rad/s — an error of 0.0009878 rad/s.

What this speed looks like in practice

At 50 RPM a shaft turns about 1.11× as fast as a 7-inch single (45 RPM). A ceiling fan on high turns about 4× faster.

Revolutions over time

That is 3,000 revolutions per hour and 72,000 per day. A quarter turn (90°) takes 300 ms, and the shaft sweeps 0.3° every millisecond.

Rim speed and centripetal load at ω = 5.236 rad/s

Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.

RadiusDiameterRim speedCentripetal acceleration
1 cm2 cm0.05236 m/s · 0.1885 km/h0.2742 m/s² · 0.02796 g
5 cm10 cm0.2618 m/s · 0.9425 km/h1.371 m/s² · 0.1398 g
10 cm20 cm0.5236 m/s · 1.885 km/h2.742 m/s² · 0.2796 g
25 cm50 cm1.309 m/s · 4.712 km/h6.854 m/s² · 0.6989 g
50 cm1 m2.618 m/s · 9.425 km/h13.71 m/s² · 1.398 g
1 m2 m5.236 m/s · 18.85 km/h27.42 m/s² · 2.796 g

Driving this speed with an AC motor

Supply frequency an induction motor would need for a synchronous speed of 50 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.

PolesSupply frequencyPractical note
20.8333 HzBelow typical VFD range — use a gearbox
41.667 HzBelow typical VFD range — use a gearbox
62.5 HzBelow typical VFD range — use a gearbox
83.333 HzBelow typical VFD range — use a gearbox

Through a reduction gearbox

Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.

RatioOutput speedTorque ×
3:116.67 RPM · 1.745 rad/s×3
5:110 RPM · 1.047 rad/s×5
10:15 RPM · 0.5236 rad/s×10
30:11.667 RPM · 0.1745 rad/s×30

Stored rotational energy

Kinetic energy E = ½·I·ω² for a range of moments of inertia.

Moment of inertiaEnergy
0.001 kg·m² (small fan impeller)0.01371 J
0.01 kg·m² (bench-grinder wheel)0.1371 J
0.1 kg·m² (car flywheel)1.371 J
1 kg·m² (industrial flywheel)13.71 J

Multiples of this speed

Rizwan Malik headshot

Rizwan Malik

Founder & Editor

  • Formulas checked against the BIPM SI Brochure
  • Unit definitions per NIST SP 811

Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.

Frequently asked questions