52 RPM to Radians Per Second Converter
Instant conversion for 52 RPM to rad/s (5.445427 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.
- Radians per Second (rad/s)
- 5.4454273
- Degrees per Second (°/s)
- 312 °/s
- Hertz (Hz)
- 0.866667 Hz
- Revolutions per Second (RPS)
- 0.866667 rev/s
- Revolutions per Hour (RPH)
- 3,120 rev/hr
- Revolutions per Day
- 74,880 rev/day
- Radians per Minute (rad/min)
- 326.72564 rad/min
- Milliradians per Second (mrad/s)
- 5,445.4273 mrad/s
- Period (seconds per rev)
- 1.153846 s/rev
- Exact Formula
- 52 × π/30 = 5.4454273 rad/s
- Nearest Real-World Example
- Ceiling fan — high (200 RPM)
Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:
Worked Conversion: 52 RPM to Radians Per Second
To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.
rad/s = 52 × (π / 30) = 5.445427 rad/s
Exact fraction: 52π/30 rad/s · Reciprocal: 5.445 rad/s × (30/π) = 52 RPM
Reverse Conversion: 5.445 rad/s to RPM
Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.
In-Depth Engineering Guides & References
52 RPM: exact form, real-world scale & engineering tables
Exact answer in terms of π
52 RPM = 26π/15 rad/s ≈ 5.445427 rad/s
Reduced fraction — keep this form through multi-step problems and only round at the end.
Rounding check
Using the rounded factor 0.1047 gives 5.4444 rad/s instead of the exact 5.4454 rad/s — an error of 0.001027 rad/s.
What this speed looks like in practice
At 52 RPM a shaft turns about 1.16× as fast as a 7-inch single (45 RPM). A ceiling fan on high turns about 3.85× faster.
Revolutions over time
That is 3,120 revolutions per hour and 74,880 per day. A quarter turn (90°) takes 288 ms, and the shaft sweeps 0.312° every millisecond.
Rim speed and centripetal load at ω = 5.4454 rad/s
Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.
| Radius | Diameter | Rim speed | Centripetal acceleration |
|---|---|---|---|
| 1 cm | 2 cm | 0.05445 m/s · 0.196 km/h | 0.2965 m/s² · 0.03024 g |
| 5 cm | 10 cm | 0.2723 m/s · 0.9802 km/h | 1.483 m/s² · 0.1512 g |
| 10 cm | 20 cm | 0.5445 m/s · 1.96 km/h | 2.965 m/s² · 0.3024 g |
| 25 cm | 50 cm | 1.361 m/s · 4.901 km/h | 7.413 m/s² · 0.7559 g |
| 50 cm | 1 m | 2.723 m/s · 9.802 km/h | 14.83 m/s² · 1.512 g |
| 1 m | 2 m | 5.445 m/s · 19.6 km/h | 29.65 m/s² · 3.024 g |
Driving this speed with an AC motor
Supply frequency an induction motor would need for a synchronous speed of 52 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.
| Poles | Supply frequency | Practical note |
|---|---|---|
| 2 | 0.8667 Hz | Below typical VFD range — use a gearbox |
| 4 | 1.733 Hz | Below typical VFD range — use a gearbox |
| 6 | 2.6 Hz | Below typical VFD range — use a gearbox |
| 8 | 3.467 Hz | Below typical VFD range — use a gearbox |
Through a reduction gearbox
Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.
| Ratio | Output speed | Torque × |
|---|---|---|
| 3:1 | 17.33 RPM · 1.815 rad/s | ×3 |
| 5:1 | 10.4 RPM · 1.089 rad/s | ×5 |
| 10:1 | 5.2 RPM · 0.5445 rad/s | ×10 |
| 30:1 | 1.733 RPM · 0.1815 rad/s | ×30 |
Stored rotational energy
Kinetic energy E = ½·I·ω² for a range of moments of inertia.
| Moment of inertia | Energy |
|---|---|
| 0.001 kg·m² (small fan impeller) | 0.01483 J |
| 0.01 kg·m² (bench-grinder wheel) | 0.1483 J |
| 0.1 kg·m² (car flywheel) | 1.483 J |
| 1 kg·m² (industrial flywheel) | 14.83 J |
Multiples of this speed
- 0.5× = 26 RPM2.7227 rad/s
- 2× = 104 RPM10.8909 rad/s
- 5× = 260 RPM27.2271 rad/s
- 10× = 520 RPM54.4543 rad/s

Rizwan Malik
Founder & Editor
- Formulas checked against the BIPM SI Brochure
- Unit definitions per NIST SP 811
Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.
Frequently asked questions
To convert 52 RPM to radians per second, multiply 52 by π and divide by 30: 52 × (π / 30) = 5.445427 rad/s (approx. 5.445 rad/s).
52 RPM equals 0.8667 Hz (revolutions per second), calculated by dividing 52 by 60 seconds.
To convert 5.445 rad/s back to RPM, multiply by 30 and divide by π: 5.445 × (30 / π) ≈ 52 RPM.
At 52 RPM, one full 360° revolution takes 1.1538 seconds (1153.85 ms).
A 4-pole induction motor has a synchronous speed of 52 RPM at 1.7333 Hz (f = RPM × poles / 120 = 52 × 4 / 120). That is far below a drive's usable range, so in practice a standard motor runs faster and a gearbox or gearmotor brings the output down to this speed.
Tangential speed is v = ω·r = 5.445427 rad/s × 0.1 m = 0.5445 m/s (1.9604 km/h). The centripetal acceleration at the rim is ω²·r = 2.9653 m/s².