RPM to Radians Per SecondRPM to rad/s

44 RPM to Radians Per Second Converter

Instant conversion for 44 RPM to rad/s (4.607669 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.

m
Result4.607669 rad/s
Radians per Second (rad/s)
4.6076692
Degrees per Second (°/s)
264 °/s
Hertz (Hz)
0.733333 Hz
Revolutions per Second (RPS)
0.733333 rev/s
Revolutions per Hour (RPH)
2,640 rev/hr
Revolutions per Day
63,360 rev/day
Radians per Minute (rad/min)
276.46015 rad/min
Milliradians per Second (mrad/s)
4,607.6692 mrad/s
Period (seconds per rev)
1.363636 s/rev
Exact Formula
44 × π/30 = 4.6076692 rad/s
Nearest Real-World Example
Ceiling fan — high (200 RPM)
Precision Drift Meter (Exact π/30 vs. 0.10472 Rounded)Zero Drift Here

Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:

Exact Value (π/30):4.607669 rad/s
Rounded (0.10472):4.607680 rad/s
Angular Error / Hour:2.22° / hr

Worked Conversion: 44 RPM to Radians Per Second

To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.

rad/s = 44 × (π / 30) = 4.607669 rad/s

Exact fraction: 44π/30 rad/s · Reciprocal: 4.608 rad/s × (30/π) = 44 RPM

Angular Velocity
4.607669 rad/s
Frequency
0.7333 Hz
Degrees / Second
264 °/s
Period per Rev
1.3636 s
Engineering Context: The 20–50 RPM band is turntable and potter's-wheel country, and it brackets both vinyl standards (33⅓ and 45 RPM).

Reverse Conversion: 4.608 rad/s to RPM

Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.

Browse Reverse Conversions →

In-Depth Engineering Guides & References

5.36 Rad/s to RPM: College Physics Homework Benchmark Solution— Serway & Halliday kinematics proof and analytical derivation.
RPM to Radians Per Second Formula & Calculus Proof— Dimensional cancellation, π/30 derivation, and IEEE 754 precision.
Angular Velocity Guide & Rotational Kinematics— SI standards, tangential velocity (v = ω·r), and centripetal acceleration.
Complete Conversion Index— Browse pre-calculated conversion speeds from 1 to 20,000 RPM.

44 RPM: exact form, real-world scale & engineering tables

Exact answer in terms of π

44 RPM = 22π/15 rad/s ≈ 4.607669 rad/s

Reduced fraction — keep this form through multi-step problems and only round at the end.

Rounding check

Using the rounded factor 0.1047 gives 4.6068 rad/s instead of the exact 4.6077 rad/s — an error of 0.0008692 rad/s.

What this speed looks like in practice

At 44 RPM a shaft turns about 1.32× as fast as an LP record (33⅓ RPM). A 7-inch single (45 RPM) turns about 1.02× faster.

Revolutions over time

That is 2,640 revolutions per hour and 63,360 per day. A quarter turn (90°) takes 341 ms, and the shaft sweeps 0.264° every millisecond.

Rim speed and centripetal load at ω = 4.6077 rad/s

Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.

RadiusDiameterRim speedCentripetal acceleration
1 cm2 cm0.04608 m/s · 0.1659 km/h0.2123 m/s² · 0.02165 g
5 cm10 cm0.2304 m/s · 0.8294 km/h1.062 m/s² · 0.1082 g
10 cm20 cm0.4608 m/s · 1.659 km/h2.123 m/s² · 0.2165 g
25 cm50 cm1.152 m/s · 4.147 km/h5.308 m/s² · 0.5412 g
50 cm1 m2.304 m/s · 8.294 km/h10.62 m/s² · 1.082 g
1 m2 m4.608 m/s · 16.59 km/h21.23 m/s² · 2.165 g

Driving this speed with an AC motor

Supply frequency an induction motor would need for a synchronous speed of 44 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.

PolesSupply frequencyPractical note
20.7333 HzBelow typical VFD range — use a gearbox
41.467 HzBelow typical VFD range — use a gearbox
62.2 HzBelow typical VFD range — use a gearbox
82.933 HzBelow typical VFD range — use a gearbox

Through a reduction gearbox

Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.

RatioOutput speedTorque ×
3:114.67 RPM · 1.536 rad/s×3
5:18.8 RPM · 0.9215 rad/s×5
10:14.4 RPM · 0.4608 rad/s×10
30:11.467 RPM · 0.1536 rad/s×30

Stored rotational energy

Kinetic energy E = ½·I·ω² for a range of moments of inertia.

Moment of inertiaEnergy
0.001 kg·m² (small fan impeller)0.01062 J
0.01 kg·m² (bench-grinder wheel)0.1062 J
0.1 kg·m² (car flywheel)1.062 J
1 kg·m² (industrial flywheel)10.62 J

Multiples of this speed

Rizwan Malik headshot

Rizwan Malik

Founder & Editor

  • Formulas checked against the BIPM SI Brochure
  • Unit definitions per NIST SP 811

Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.

Frequently asked questions