RPM to Radians Per SecondRPM to rad/s

43 RPM to Radians Per Second Converter

Instant conversion for 43 RPM to rad/s (4.502949 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.

m
Result4.502949 rad/s
Radians per Second (rad/s)
4.5029495
Degrees per Second (°/s)
258 °/s
Hertz (Hz)
0.716667 Hz
Revolutions per Second (RPS)
0.716667 rev/s
Revolutions per Hour (RPH)
2,580 rev/hr
Revolutions per Day
61,920 rev/day
Radians per Minute (rad/min)
270.17697 rad/min
Milliradians per Second (mrad/s)
4,502.9495 mrad/s
Period (seconds per rev)
1.395349 s/rev
Exact Formula
43 × π/30 = 4.5029495 rad/s
Nearest Real-World Example
Ceiling fan — high (200 RPM)
Precision Drift Meter (Exact π/30 vs. 0.10472 Rounded)Zero Drift Here

Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:

Exact Value (π/30):4.502949 rad/s
Rounded (0.10472):4.502960 rad/s
Angular Error / Hour:2.17° / hr

Worked Conversion: 43 RPM to Radians Per Second

To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.

rad/s = 43 × (π / 30) = 4.502949 rad/s

Exact fraction: 43π/30 rad/s · Reciprocal: 4.503 rad/s × (30/π) = 43 RPM

Angular Velocity
4.502949 rad/s
Frequency
0.7167 Hz
Degrees / Second
258 °/s
Period per Rev
1.3953 s
Engineering Context: The 20–50 RPM band is turntable and potter's-wheel country, and it brackets both vinyl standards (33⅓ and 45 RPM).

Reverse Conversion: 4.503 rad/s to RPM

Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.

Browse Reverse Conversions →

In-Depth Engineering Guides & References

5.36 Rad/s to RPM: College Physics Homework Benchmark Solution— Serway & Halliday kinematics proof and analytical derivation.
RPM to Radians Per Second Formula & Calculus Proof— Dimensional cancellation, π/30 derivation, and IEEE 754 precision.
Angular Velocity Guide & Rotational Kinematics— SI standards, tangential velocity (v = ω·r), and centripetal acceleration.
Complete Conversion Index— Browse pre-calculated conversion speeds from 1 to 20,000 RPM.

43 RPM: exact form, real-world scale & engineering tables

Exact answer in terms of π

43 RPM = 43π/30 rad/s ≈ 4.502949 rad/s

Keep π symbolic through multi-step problems and only round at the end.

Rounding check

Using the rounded factor 0.1047 gives 4.5021 rad/s instead of the exact 4.5029 rad/s — an error of 0.0008495 rad/s.

What this speed looks like in practice

At 43 RPM a shaft turns about 1.29× as fast as an LP record (33⅓ RPM). A 7-inch single (45 RPM) turns about 1.05× faster.

Revolutions over time

That is 2,580 revolutions per hour and 61,920 per day. A quarter turn (90°) takes 349 ms, and the shaft sweeps 0.258° every millisecond.

Rim speed and centripetal load at ω = 4.5029 rad/s

Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.

RadiusDiameterRim speedCentripetal acceleration
1 cm2 cm0.04503 m/s · 0.1621 km/h0.2028 m/s² · 0.02068 g
5 cm10 cm0.2251 m/s · 0.8105 km/h1.014 m/s² · 0.1034 g
10 cm20 cm0.4503 m/s · 1.621 km/h2.028 m/s² · 0.2068 g
25 cm50 cm1.126 m/s · 4.053 km/h5.069 m/s² · 0.5169 g
50 cm1 m2.251 m/s · 8.105 km/h10.14 m/s² · 1.034 g
1 m2 m4.503 m/s · 16.21 km/h20.28 m/s² · 2.068 g

Driving this speed with an AC motor

Supply frequency an induction motor would need for a synchronous speed of 43 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.

PolesSupply frequencyPractical note
20.7167 HzBelow typical VFD range — use a gearbox
41.433 HzBelow typical VFD range — use a gearbox
62.15 HzBelow typical VFD range — use a gearbox
82.867 HzBelow typical VFD range — use a gearbox

Through a reduction gearbox

Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.

RatioOutput speedTorque ×
3:114.33 RPM · 1.501 rad/s×3
5:18.6 RPM · 0.9006 rad/s×5
10:14.3 RPM · 0.4503 rad/s×10
30:11.433 RPM · 0.1501 rad/s×30

Stored rotational energy

Kinetic energy E = ½·I·ω² for a range of moments of inertia.

Moment of inertiaEnergy
0.001 kg·m² (small fan impeller)0.01014 J
0.01 kg·m² (bench-grinder wheel)0.1014 J
0.1 kg·m² (car flywheel)1.014 J
1 kg·m² (industrial flywheel)10.14 J

Multiples of this speed

Rizwan Malik headshot

Rizwan Malik

Founder & Editor

  • Formulas checked against the BIPM SI Brochure
  • Unit definitions per NIST SP 811

Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.

Frequently asked questions