RPM to Radians Per SecondRPM to rad/s

88 RPM to Radians Per Second Converter

Instant conversion for 88 RPM to rad/s (9.215338 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.

m
Result9.215338 rad/s
Radians per Second (rad/s)
9.2153385
Degrees per Second (°/s)
528 °/s
Hertz (Hz)
1.466667 Hz
Revolutions per Second (RPS)
1.466667 rev/s
Revolutions per Hour (RPH)
5,280 rev/hr
Revolutions per Day
126,720 rev/day
Radians per Minute (rad/min)
552.92031 rad/min
Milliradians per Second (mrad/s)
9,215.3385 mrad/s
Period (seconds per rev)
0.681818 s/rev
Exact Formula
88 × π/30 = 9.2153385 rad/s
Nearest Real-World Example
Ceiling fan — high (200 RPM)
Precision Drift Meter (Exact π/30 vs. 0.10472 Rounded)Zero Drift Here

Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:

Exact Value (π/30):9.215338 rad/s
Rounded (0.10472):9.215360 rad/s
Angular Error / Hour:4.44° / hr

Worked Conversion: 88 RPM to Radians Per Second

To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.

rad/s = 88 × (π / 30) = 9.215338 rad/s

Exact fraction: 88π/30 rad/s · Reciprocal: 9.215 rad/s × (30/π) = 88 RPM

Angular Velocity
9.215338 rad/s
Frequency
1.4667 Hz
Degrees / Second
528 °/s
Period per Rev
0.6818 s
Engineering Context: Under 100 RPM you are around one revolution per second, the range of bicycle wheels at low speed, slow ceiling fans and hand-cranked machinery.

Reverse Conversion: 9.215 rad/s to RPM

Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.

Browse Reverse Conversions →

In-Depth Engineering Guides & References

5.36 Rad/s to RPM: College Physics Homework Benchmark Solution— Serway & Halliday kinematics proof and analytical derivation.
RPM to Radians Per Second Formula & Calculus Proof— Dimensional cancellation, π/30 derivation, and IEEE 754 precision.
Angular Velocity Guide & Rotational Kinematics— SI standards, tangential velocity (v = ω·r), and centripetal acceleration.
Complete Conversion Index— Browse pre-calculated conversion speeds from 1 to 20,000 RPM.

88 RPM: exact form, real-world scale & engineering tables

Exact answer in terms of π

88 RPM = 44π/15 rad/s ≈ 9.215338 rad/s

Reduced fraction — keep this form through multi-step problems and only round at the end.

Rounding check

Using the rounded factor 0.1047 gives 9.2136 rad/s instead of the exact 9.2153 rad/s — an error of 0.001738 rad/s.

What this speed looks like in practice

At 88 RPM a shaft turns about 1.96× as fast as a 7-inch single (45 RPM). A ceiling fan on high turns about 2.27× faster.

Revolutions over time

That is 5,280 revolutions per hour and 126,720 per day. A quarter turn (90°) takes 170 ms, and the shaft sweeps 0.528° every millisecond.

Rim speed and centripetal load at ω = 9.2153 rad/s

Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.

RadiusDiameterRim speedCentripetal acceleration
1 cm2 cm0.09215 m/s · 0.3318 km/h0.8492 m/s² · 0.0866 g
5 cm10 cm0.4608 m/s · 1.659 km/h4.246 m/s² · 0.433 g
10 cm20 cm0.9215 m/s · 3.318 km/h8.492 m/s² · 0.866 g
25 cm50 cm2.304 m/s · 8.294 km/h21.23 m/s² · 2.165 g
50 cm1 m4.608 m/s · 16.59 km/h42.46 m/s² · 4.33 g
1 m2 m9.215 m/s · 33.18 km/h84.92 m/s² · 8.66 g

Driving this speed with an AC motor

Supply frequency an induction motor would need for a synchronous speed of 88 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.

PolesSupply frequencyPractical note
21.467 HzBelow typical VFD range — use a gearbox
42.933 HzBelow typical VFD range — use a gearbox
64.4 HzBelow typical VFD range — use a gearbox
85.867 HzReachable with a VFD

Through a reduction gearbox

Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.

RatioOutput speedTorque ×
3:129.33 RPM · 3.072 rad/s×3
5:117.6 RPM · 1.843 rad/s×5
10:18.8 RPM · 0.9215 rad/s×10
30:12.933 RPM · 0.3072 rad/s×30

Stored rotational energy

Kinetic energy E = ½·I·ω² for a range of moments of inertia.

Moment of inertiaEnergy
0.001 kg·m² (small fan impeller)0.04246 J
0.01 kg·m² (bench-grinder wheel)0.4246 J
0.1 kg·m² (car flywheel)4.246 J
1 kg·m² (industrial flywheel)42.46 J

Multiples of this speed

Rizwan Malik headshot

Rizwan Malik

Founder & Editor

  • Formulas checked against the BIPM SI Brochure
  • Unit definitions per NIST SP 811

Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.

Frequently asked questions