RPM to Radians Per SecondRPM to rad/s

42 RPM to Radians Per Second Converter

Instant conversion for 42 RPM to rad/s (4.398230 rad/s). Analytical π/30 formula, rotational frequency in Hz, and full kinematics.

m
Result4.398230 rad/s
Radians per Second (rad/s)
4.3982297
Degrees per Second (°/s)
252 °/s
Hertz (Hz)
0.7 Hz
Revolutions per Second (RPS)
0.7 rev/s
Revolutions per Hour (RPH)
2,520 rev/hr
Revolutions per Day
60,480 rev/day
Radians per Minute (rad/min)
263.89378 rad/min
Milliradians per Second (mrad/s)
4,398.2297 mrad/s
Period (seconds per rev)
1.428571 s/rev
Exact Formula
42 × π/30 = 4.3982297 rad/s
Nearest Real-World Example
Ceiling fan — high (200 RPM)
Precision Drift Meter (Exact π/30 vs. 0.10472 Rounded)Zero Drift Here

Generic web calculators use the rounded 0.10472 multiplier. At this rotational speed, that approximation introduces numerical drift:

Exact Value (π/30):4.398230 rad/s
Rounded (0.10472):4.398240 rad/s
Angular Error / Hour:2.12° / hr

Worked Conversion: 42 RPM to Radians Per Second

To convert revolutions per minute (RPM) to SI angular velocity (rad/s), multiply by 2π radians per revolution and divide by 60 seconds per minute. The analytical factor simplifies to π/30.

rad/s = 42 × (π / 30) = 4.398230 rad/s

Exact fraction: 42π/30 rad/s · Reciprocal: 4.398 rad/s × (30/π) = 42 RPM

Angular Velocity
4.398230 rad/s
Frequency
0.7 Hz
Degrees / Second
252 °/s
Period per Rev
1.4286 s
Engineering Context: The 20–50 RPM band is turntable and potter's-wheel country, and it brackets both vinyl standards (33⅓ and 45 RPM).

Reverse Conversion: 4.398 rad/s to RPM

Need to convert from radians per second back to RPM? Use our reverse programmatic converter with exact 30/π precision.

Browse Reverse Conversions →

In-Depth Engineering Guides & References

5.36 Rad/s to RPM: College Physics Homework Benchmark Solution— Serway & Halliday kinematics proof and analytical derivation.
RPM to Radians Per Second Formula & Calculus Proof— Dimensional cancellation, π/30 derivation, and IEEE 754 precision.
Angular Velocity Guide & Rotational Kinematics— SI standards, tangential velocity (v = ω·r), and centripetal acceleration.
Complete Conversion Index— Browse pre-calculated conversion speeds from 1 to 20,000 RPM.

42 RPM: exact form, real-world scale & engineering tables

Exact answer in terms of π

42 RPM = 7π/5 rad/s ≈ 4.39823 rad/s

Reduced fraction — keep this form through multi-step problems and only round at the end.

Rounding check

Using the rounded factor 0.1047 gives 4.3974 rad/s instead of the exact 4.3982 rad/s — an error of 0.0008297 rad/s.

What this speed looks like in practice

At 42 RPM a shaft turns about 1.26× as fast as an LP record (33⅓ RPM). A 7-inch single (45 RPM) turns about 1.07× faster.

Revolutions over time

That is 2,520 revolutions per hour and 60,480 per day. A quarter turn (90°) takes 357 ms, and the shaft sweeps 0.252° every millisecond.

Rim speed and centripetal load at ω = 4.3982 rad/s

Tangential speed v = ω·r and centripetal acceleration a = ω²·r for common radii.

RadiusDiameterRim speedCentripetal acceleration
1 cm2 cm0.04398 m/s · 0.1583 km/h0.1934 m/s² · 0.01973 g
5 cm10 cm0.2199 m/s · 0.7917 km/h0.9672 m/s² · 0.09863 g
10 cm20 cm0.4398 m/s · 1.583 km/h1.934 m/s² · 0.1973 g
25 cm50 cm1.1 m/s · 3.958 km/h4.836 m/s² · 0.4931 g
50 cm1 m2.199 m/s · 7.917 km/h9.672 m/s² · 0.9863 g
1 m2 m4.398 m/s · 15.83 km/h19.34 m/s² · 1.973 g

Driving this speed with an AC motor

Supply frequency an induction motor would need for a synchronous speed of 42 RPM (f = RPM × poles / 120). Real motors run 2–4% below synchronous speed under load.

PolesSupply frequencyPractical note
20.7 HzBelow typical VFD range — use a gearbox
41.4 HzBelow typical VFD range — use a gearbox
62.1 HzBelow typical VFD range — use a gearbox
82.8 HzBelow typical VFD range — use a gearbox

Through a reduction gearbox

Output speed and ideal torque multiplication (losses ignored) for common reduction ratios.

RatioOutput speedTorque ×
3:114 RPM · 1.466 rad/s×3
5:18.4 RPM · 0.8796 rad/s×5
10:14.2 RPM · 0.4398 rad/s×10
30:11.4 RPM · 0.1466 rad/s×30

Stored rotational energy

Kinetic energy E = ½·I·ω² for a range of moments of inertia.

Moment of inertiaEnergy
0.001 kg·m² (small fan impeller)0.009672 J
0.01 kg·m² (bench-grinder wheel)0.09672 J
0.1 kg·m² (car flywheel)0.9672 J
1 kg·m² (industrial flywheel)9.672 J

Multiples of this speed

Rizwan Malik headshot

Rizwan Malik

Founder & Editor

  • Formulas checked against the BIPM SI Brochure
  • Unit definitions per NIST SP 811

Rizwan Malik builds and maintains RPM to Radians Per Second. Every formula, table and worked example on the site is checked against the BIPM SI Brochure and NIST unit guidance before it is published.

Frequently asked questions